Choose and Learn How to Recycle Well

Multi-Protocol Label Switching (MPLS) continue…

Adding a Label

MPLS is a method that takes the best of both worlds and creates a concept that allows IP packets to travel through the network as if IP were a connection-oriented protocol (which it isn’t). Using special routers called Label Switching Routers (LSRs) does this. These routers connect a traditional IP network to an MPLS network. A packet enters the MPLS network through an ingress LSR, which attaches a label to the packet, and exits the MPLS switched network through an egress LSR. The ingress LSR is the router that performs the necessary processing to determine the path a packet will need to take through the switched network. This can be done using traditional routing protocols such as OSPF. The path is identified by the label that the ingress router attaches to the packet. As you can see, the ingress router must perform the traditional role that a router fills. It must perform a lookup in the routing table and decide to which network the packet needs to be sent for eventual delivery to the host computer.

Internet 2010

However, as the packet passes through the switched network, it is only necessary for the switch to take a quick look at the label to make a decision on which port to output the packet. A table called the Label Information Base (LIB) is used in a manner similar to a routing table to determine the correct port based on the packet’s label information. The switch doesn’t perform IP header processing, looking at the IP address, the TTL value, and so on. It just spends a small amount of time doing a lookup of the label in the table and outputting the packet on the correct port.

When the packet reaches the egress LSR, the label is removed by the router, and then the IP packet is processed in the normal manner by traditional routers on the destination network.

If this sounds like a simple concept, that’s because it is. MPLS still is in the development stages, so you’ll find that different vendors implement it in different ways. Several Internet draft documents attempt to create a standard for MPLS. Other features, such as Quality of Service (QoS) and traffic management techniques, are being developed to make MPLS a long-term solution.

Using Frame Relay and ATM with MPLS

One of the best features about the current design of MPLS is that it separates the label-switching concept from the underlying technology. That is, you don’t have to build special switches that are meant for just MPLS networks. MPLS doesn’t care what the underlying transport is. It is concerned only with setting up a path and reducing the amount of processing a packet takes as it travels through the circuit.

Because of this, it’s a simple matter for an ATM or Frame Relay switch vendor to reprogram or upgrade its product line to use MPLS. For ATM switches, the VPI (virtual path identifier) and VCI (virtual channel identifier) fields in the ATM cell are used for the Label field. In Frame Relay switches, an extra field is added to the IP header to store the label. However, don’t get confused and think that an MPLS network is an ATM network or a Frame Relay network. These switches must be reprogrammed to understand the label concept. It’s even possible, for example, for an ATM switch to switch both ATM and MPLS traffic at the same time. By allowing for the continued use of existing equipment (and

these switches are not inexpensive items), large ISPs or network providers can leverage their current investment, while preparing to install newer MPLS equipment when the standards evolve to a stage that makes it a good investment.

For the long term it’s most likely that MPLS will be implemented using technology similar to Frame Relay instead of ATM. This is because of the small cell size of the ATM cell (53 bytes) combined with a high overhead (the 5-byte cell header). In a small network with little traffic, this 5-byte cell header seems insignificant. However, when you scale this to large bandwidth network pipes, this amount of overhead consumes a large amount of bandwidth given the small amount of data carried in the 53- byte cell. Thus, variable-length frames are most likely to become the basis for MPLS networks in the next few years.

WORKOUT ANYTIME on CNN Money

WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

What’s next for Blockbuster’s empty stores
By: Patrick deHahn

Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

(Read More)

My trip to Dhaka, Bangladesh

It was quite an intense process to pin down the existing system. It existed in bits and pieces in various places of the organization managed by different people in the structure. It was quite unique to find an organization with a finance management system spanning from resource mobilization (Income generation, contracting and applying for donor funding) to implementing through 3rd parties (implementation through contractors as well as other civil society organizations) but not to have it documented any ware. It was a tough job to get agreement on the current practices as well, as each individual seems to have tweaked it to suite his/her requirement. Finally we documented the entire system as the minimum agreed common current practices.

This is typical of an organization which has grown organically and reached a point that does not allow it to grow any further without structure and form in its organization structure and systems. As a result of this the assignment has ballooned into a much bigger assignment as the organization needs basic guidance regarding system development and management. I was also able to analyze the system and suggest some key improvements (fundamental stuff really) to instill the use and management of the system. The client has now requested that I support them in the preparation for implementation which needs a lot of pre planning and documentation in the form of developing policies, manuals, forms, job descriptions, task calculation etc. It also means that we have to design the administrative and functional structure so that the organization can manage a decentralized finance function spanning the entire spectrum of financial management.

I left Dhaka on Friday and headed back to Colombo. The flight from Dhaka to Bangkok on TG was fine and operated on time. I had a 5 hour stay in Bangkok before I took the flight to Colombo. I must say that I don’t find the new airport at Bangkok as passenger friendly as the earlier one. The new one however is big and posh but it has lost some of its coziness in my opinion. As usual the Colombo flight was delayed for over a half an hour and once in Colombo had to endure the long queues at the emigration counter.

I am back in Colombo and back at work to finish another assignment (OCA) I took concurrently and had a junior consultant do some parts of it. I have to send its draft report by the end of business 6th April. My next assignment is going to be in the Philippines and looking forward to it as it will be my first assignment in the Philippines.

Monitoring weight loss

There are two schools of thought on how to monitor weight loss:

  • Daily weighing
  • The once-weekly weigh-in.

This is an individual issue. If you are the sort of person who needs a daily date with your weighing scales, then by all means do so. Keep a record of your progress using a chart like the one opposite. You may see weight-shifting patterns emerging and be able to isolate foods that have a negative effect on your weight. If you prefer the surprise-at-the-end-of-the-week, that is fine too. You should still keep a record and watch out for any plateaux where weight loss dries up, which may mean that you need to lower your carbohydrate levels or increase your physical activity.

Whichever your preferred monitoring method, keep a tight-fitting pair of trousers or other item of clothing and try them on regularly to establish how your shape is changing. Your weight may stabilize for a while, and if you are exercising regularly and increasing your muscle-to-fat ratio you may even may weigh slightly more for a bit, but you will be fitter and – in the end – leaner.

Diet Start

TOP ANTI-SNACKING TIPS

  • Try not to snack while watching television, playing video games or using the computer. Eat meals and snacks in the kitchen or dining room, so that you are more aware of what- and how much — you are eating.
  • When you feel a snack attack coming on, run a bath, go for a walk, ring a friend… Do anything that will keep you away from the refrigerator.
  • Don’t go shopping when you are hungry — it is then that you may reach out for that chocolate bar.
  • If you are going to snack, make sure it is a protein snack.

Dietary demons – and how to beat them

  1. Not so well-meaning friends and family members: one of the mostdifficult things to deal with is the friend or relative who tries to sway you off-course. Don’t be bullied into breaking your resolve. Decline politely andexplain that you are relying on them for support. If you are visiting them,take a whey-protein smoothie with you.
  2. Boredom: you shouldn’t get bored following the plans,because there are so many different things to eat and ways to prepare your food. Even if you aren’t a natural cook, experimenting in the kitchen willkeep you motivated.
  3. Alcohol: you are allowed a couple of glasses of wine when you start the
  4. Keep on Tracking Plan, but don’t be tempted to have more. There is nothing like a little extra alcohol to persuade you that you’ll start againtomorrow. Avoid the ‘drunken munchies’.
  5. Snack attacks: the three dietary plans allow for a couple of high-proteinsnacks each day between meals, but you could easily undermine all your efforts by hitting the biscuit jar in a moment of weakness. Clear out anything vaguely tempting from your refrigerator and cupboards, and be very carefulat times when you normally seek comfort food.

Curb your cravings by curbing your carbs

When you start eating more healthily and reducing the amount of potentially addictive carbohydrate-laden foods, you should find that your cravings begin to diminish as your blood-sugar and insulin levels even out. This will usually take about 48 hours when you start the Fast-Track Plan. If you do get a ‘snack attack’, try making yourself a whey- protein smoothie; or keep a plate of cold chicken in the refrigerator for weak moments. You can’t necessarily kill a craving, but you can wrestle it into submission.

Managing the Work/Rest Ratio in HIIT Training

High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
Fixed Work, Fixed Recovery
This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
Fixed Work, Variable Recovery
In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
Variable Work, Variable Recovery
This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
Have some fun and experiment with each of these to prevent plateaus in your workout progress!

Does Weighing Yourself Help You to Lose Weight?

Do weight changes translate into fat loss?
On a day to day basis a scale is an extremely poor tool for giving you information on changes in bodyfat levels which are very small.  Daily weight changes are mostly accounted for by four factors:  bowel movements, urination, starch and sugar intake, and blood volume.    Since your blood volume typically does NOT vary that much the other factors are more relevant.
Bowel Movements and Urination vary a lot between different people anywhere from 1.3lbs to 5.7lbs in a single day.    This is one of the reasons to consistently weight yourself after you wake up and go to the bathroom and before you eat or drink much.
However, the biggee when it comes to daily weight fluctuation, is usually glycogen storage levels.    Glycogen is just the storage form of glucose aka blood sugar.    All starch and sugar ultimately end up as glucose, glycogen or fat.     
For example, on the front end of a low carb diet you will show big weight loss which is almost all water because you store glucose/glycogen with water – hence the term carbo “Hydrate”.  Muscle and organs contain the highest levels of water, and this is significant because most of your bodyweight comes from muscles and organs. 
  
So daily changes in weight are NOT a good reflection in changes in bodyfat levels!
Can daily weighing help with long-term weight loss and fat loss?

In order to answer this question let’s review the scientific studies that have looked at this issue.     The recent advent of WIFI scales is allowing much more accurate weight records because prior to that people had to take the time to write down their weight each day.
In a recent WIFI scale study called the Weight Trial here were the results:
Over a six-month period, those who weighed daily lost about 13 lbs more than the control group.
Even those who weighed themselves up to five times each week lost less weight than the daily weighers.
Daily Weighers were more likely to do things like eating less food and watching less television so clearly the weighing helped by changing behaviors!
Although this study did not measure body fat, it is quite likely that the body weight loss did translate into significant fat loss.
For certain groups, daily weighing is a bad idea such as people with eating disorders and other psychological disorders including extremely low self-esteem.     In addition, daily weighing does not work for everyone.   For some people the inevitable plateaus or variations in weight loss can very frustrated and quit the whole process!

So daily weighing may be helpful for you, but it is not perfect and it does not accurately measure changes in bodyfat levels so it is important to do use some method of body composition testing to measure these changes which should be your ultimate goal!

Gain weight especially fat: Here’s what make you do

1. Food reactions cause fluid to surround invading food particles. When food macromolecules are identified as foreign invaders, your body launches the inflammatory response, which includes flooding an area that’s under attack. Your body will hold onto this water as long as reactive food substances remain in your tissues. This water dilutes these substances and reduces their effects, but at the same time the cells and tissues swell with water. This often accounts for swelling under the eyes and chin, in the hands, feet, ankles, and midsection.

2. Food reactions release hormones that cause fluid retention. To offset the effects of the allergic inflammatory response, the body produces hormones, such as adrenaline. But these hormones cause water retention. The adrenal hormones cortisol and aldosterone increase sodium uptake, and sodium attracts water to cells and tissues.

This action also triggers other hormonal changes, apparently through effects of the pituitary gland, which orchestrates your body’s ‘hormonal symphony.’ These other hormonal changes may include excessive secretion of anti-diuretic hormone, which causes fluid retention. Anti-diuretic hormone is also often secreted in response to stress, and is commonly released by women as part of premenstrual syndrome. The female hormone estrogen, which can be affected by food reactions, also increases water retention. Furthermore, growth hormone, which helps boost the metabolism, can be depressed by food reactions.

Diet Start

Besides these hormones, which circulate throughout the body, food reactions also have strong effects on certain gut hormones (including cholecystokinin and somatostatin), which can cause water retention and swelling directly in the gut tissues. Sometimes, when people experience immediate abdominal swelling after eating, it is due to the influence of gut hormones.

Because women tend to have more problematic hormonal profiles than men, the hormonal elements of false fat tend to be worse for them. For example, when some menopausal women are given extra hormones, their bloating and swelling increase.

When people stop eating their false fat foods, however, these hormonal problems usually stabilize quickly.

3. Food reactions make intestinal membranes swell. There is often pronounced swelling of intestinal membranes, in response to irritation by allergens and in response to hormonal imbalances. This can account for the ‘pregnant’ look that often characterizes false fat. The result of this type of swelling is a feeling of heaviness and congestion in the abdomen, particularly in the small intestine.

4. Food reactions disrupt cell chemistry, causing fluid storage. Food reactions cause a condition called cellular acidosis, which harms cell chemistry and results in fluid retention. Here’s how it works. The inflammatory response, caused by food reactions, causes calcium and sodium to enter cells, and this attracts water. It not only causes swelling, but also depresses the function of the cells’ energy centres, or mitochondria. When the mitochondria are disturbed, it saps your energy.

This action also causes even more release of the stress hormones cortisol and aldosterone, which try to correct the chemical imbalance. But this in turn just causes more fluid retention.

Furthermore, as the food reactions subside, the cells release all of these acidic chemicals into the tissues. This can cause a new round of inflammation and the release of even more protective fluids. Over a long period of time, this tissue acidity can contribute to the onset of degenerative diseases, including arthritis.

5. Food reactions cause capillaries to leak fluids. As you may recall, many food reactions release chemicals, such as histamine, that make blood vessels expand and contract, in the process leaking fluids into tissues. This leakage of fluids causes further inflammatory reactions, with accompanying swelling. Sometimes this swelling can impinge upon nerves and cause aches and pains. It can also cause hives, due to the swelling of capillaries near the surface of the skin.

Often, when this fluid leaks out of capillaries, it carries protein with it. This protein in turn attracts sodium, which causes even more fluid retention. The combination of sodium and fluid outside the cells can ‘smother’ cells by making it harder for oxygen to reach them. This contributes to further cell malfunction, and even to the death of cells.

When cells die, even more water is drawn to the area to flush away the dead cells.

6. Food reactions cause gas production. Food reactions allow the proliferation of abnormal bacteria and yeasts, and these factors lead to fermentation of food. Fermentation, primarily of carbohydrates, forms wind or gas, including methane.

Secondarily, it creates by-products of alcohol metabolism, such as the chemical acetaldehyde, and alcohol itself. Both of these substances can impair mood and cognitive function when absorbed by the body.

Food reactions also tend to slow the natural squeezing of food through the digestive tract by the bowel-muscle process of peristalsis. When food transit through the bowel is slowed, more gas and fermentation products are produced. Also, this `constipation effect’ causes more irritation of the bowel lining. This can create even more gas and can also contribute further to leaky gut syndrome, allowing reactive macromolecules to slip through the intestinal wall.

Bacterial overgrowth in the small intestine also causes fermentation and gas. This causes pressure and discomfort in the small intestine, because the small intestine is relatively narrow and doesn’t have much room for expansion. Another major contributor to gas buildup in the small intestine is lack of the digestive substance hydrochloric acid, which is abnormally low in approximately 70 per cent of all people over 60. Hydrochloric acid, or stomach acid, also tends to be chronically low in people who are under stress, in people who eat lots of processed foods, and in people with food reactions.

Gas formation is also increased by use of anti-inflammatory drugs, such as aspirin, which irritate gut mucosa. It can also be exacerbated by antacids.

In addition, poor digestion also causes increased excretion of the amino acid taurine, which lowers cellular magnesium and slows peristalsis, resulting in more intestinal gas.

Lastly, women’s menstrual cycles upset hormonal balances, and this also impairs peristalsis.

All of these factors are insidious. They feed off one another and contribute to bloating and swelling. The result of this entire range of forces is a swollen, distended belly and puffy, spongy flesh all over your body. Until now, you may have thought that this was fat. Now you know it’s not. It’s false fat — and you can get rid of it in a week or less if you make the necessary effort.

I’m sure you can do it! Every day that you make the effort, you’re going to feel a little better. You’ll look better, too.

The Secret Knowledge of Fourth Graders

As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

Here are some of the “rules” students wrote about:

  • Why you need to read “Just Right Books”
  • Why we use number 2 pencils on tests
  • Why you can only check out 2 books from the library at a time
  • Why we take AR tests
  • Why it’s important not to be tardy
  • Why we return library books on time
  • Why we have homework
  • Why we use pencils instead of pens
  • Why we don’t bend the pages of a book
  • Why we stack chairs at the end of the day
  • Why we take standardized tests

The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

5 Tips to Make Your Paperless Classroom Work

I’m now more than 3/4 of the way through my year of 1:1 iPad work with fourth graders, and while I hoped to have a paperless classroom, the reality has been a bit different. We’re definitely using less paper than we would without iPads, but I can’t pretend that we’re paper-free. As I reflect on this school year, here are five things I would do differently next year to make the paperless transition go even better.

1. Begin the year with a typing boot camp.
The biggest obstacle to the paperless classroom at the beginning of fourth grade is simply that the kids (for the most part) don’t know how to type. Tasks that should have been quick ended up taking 3-4 times the length that I’d anticipated just because the kids were hunting for keys on the keyboard. I think if I’d spent the first term of the year working on typing skills, it would have made a big difference. And on a related note, I’d encourage students to get bluetooth keyboards to use with their iPads (assuming the school won’t invest in those, too).

2. Transition gradually.
When my students start fourth grade, they come from a school that does not have 1:1 iPads. As a result, the technology integration is a big adjustment–for both students and parents. Going fully paperless can be a huge culture shock for the students, and the transition can produce some anxiety. Even with tech-savvy students, there can be a huge learning curve with different apps, and it can quickly get frustrating for some kids–especially the ones who were very comfortable with school as they previously knew it. Start small with a few key apps (e.g., Edmodo, Evernote) and build from there.

3. Try to give options.
Some students are far more comfortable with the iPads than others, and sometimes their lack of comfort can impact their work. With writing, for example, I’ve learned to give students the option of drafting on paper, even though there are lots of mind-mapping and word processing apps they could use for drafting. Usually once they have that first draft on paper, they’re more comfortable typing it in to make revisions and edits. For some of my students, that flexibility makes a huge difference in the amount of writing they can endure. For other students, the iPads boost productivity. Either way, we know that choice is important to students, and this is another important way to differentiate in a 1:1 classroom.

4. Don’t force it.
There are still some contexts where it makes more sense to use paper. Math tests are one example for me. I don’t tend to give students multiple choice tests in math, and I want them to have plenty of space to show their work. Yes, they could do the work on GoodReader with a stylus and turn it in on Edmodo, but that’s not necessarily more efficient for me to grade–especially on a multipage test. Similarly, we’re still using paper and a notebook for our word study work. We use differentiated spelling lists with Words Their Way, and I want students to go through the practice of sorting and recording their words each week. Paper makes sense for that.

5. Stay flexible, and have a backup plan.
At the beginning of the year, we were using our iPads for almost everything (we still are). But then I got sick, and I had to write sub plans. I never know who I’m going to have as a sub, but there are two things that are certain: 1) the sub will never be as comfortable managing a class full of iPads as I am, and 2) students will be more apt to misbehave when they have a sub. As a result, I don’t usually include the iPads in my sub plans unless I know that there will be someone there to enforce my expectations (e.g., someone I co-teach with or my student teacher). If students expect to use the iPads for everything, it can really throw a wrench into the system to take those away, even for a day. Therefore, it’s important to be flexible with using them throughout the year so that students aren’t dependent on them. Sure, they might have a preference, but they need to be able to function without them. That’s also true for times when the power goes out, the internet goes down, or a software glitch makes the iPad temporarily unavailable.

Any tips to add? I’d love to hear your thoughts in the comments section.

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

It’s Not Just You™ – Battle.Net Issues with Logging In Today [Notification]

Just a quick post to let others know that if you are having logging in to Battle.Net today (August 1st) that lots of people have been having problems as of this morning. Blizzard has addressed this with a quick note via their twitter, seen at:

https://twitter.com/BlizzardCS/status/760100687111938048

Retry or Go Back To Bed? Hmmm….

For those playing Blizzard/Battle.Net games this weekend, hopefully it will be up soon – just letting you know, It’s Not Just You™ !

How To Use The Mouse To The Best Of Your Ability (a.k.a. How To Be A Better ‘First Person Shooter’) [Text-Only]


[Text-Only – This Post is Text-Only Mode, for now. I may return to this posting and add Screenshots or Images at a later time.]

I was browsing around in the Steam Forums [forii?], where I like to try and answer Technical Questions and give Suggestions about Gameplay and Tips – and I recently answered a query someone had about using the Mouse in Fallout 4 (arguably a ‘Shooter’ game for the most part) and how it seemed difficult for them to aim in the game (it is possible to utilize an Automated Aiming capability called V.A.T.S., in Fallout 4 – but the game can also be played ‘in real time’ without it, playing as a First Person Shooter would be played, similar to games like Overwatch, Counter Strike: Global Offensive, Battlefield, and more).

So, I answered with a somewhat-lengthy reply, trying to be helpful and informative, letting them know where to do things like change the Settings of the Mouse and the Sensitivity; really trying to show them that there needs to be a ‘personalization’ of the Mouse Settings, if they wanted to utilize the Mouse, as a gaming tool, to the best of their ability (to “let your ability shine through the Mouse” as it were).

I thought it might be nice to share my answer here too, then – to share with others that may be wondering things like:

“Why am I having so much trouble aiming/killing in <game name>?”

“Why does it seem so hard to kill people <in a Multiplayer game>?”

“How can I improve my gameplay in Multiplayer/Player-Versus-Player?”

…and similar questions.

Thus, here was my reply in the Forum… Perhaps it can be of some use to you:

—–

If I may pop in, as a ‘First Person Shooter’ since Wolfenstein 3D (1992), and having won some Local Tournaments in the past (UT99 and Quake III Arena); you really need to find your own personal ‘mouse sensitivity’…

(I used to do 180’s while running to ‘check my six’ or headshot the player behind me – which they didn’t like of course, heh)

Note that this must be adjusted for every new mouse and potentially every new game. This is the only way to truly have a movement and reaction time/rate in the game that you personally feel comfortable with.


There are a few places you must adjust it:

– in Windows (Settings>Devices>Mouse [for Windows 10])
– in Mouse Software (that disc that comes with the Mouse that everyone ignores, or the manufacturer’s Drivers and associated ‘Software Configurator’ of some type for the mouse from their website), where you can also Keybind different keys or combinations to your Mouse, if it can do so, and set DPI gradations/steps.
– in the Game (Options or Settings)


Again, I cannot helpfully stress this enough; try to do this for each and every game you play – it is amazing in how it can personalize your comfortable movement/scan/hit rate.
It is really possible to ‘hit anything’ in a game, if you make your own personalized changes to all of the above.


Some people like to move their mouse a lot, slowing down the movement into smaller gradations for sniping and tight movements.
Some people like to move their mouse very little, using mostly their fingers and hardly turning their wrist (these types usually switch DPI settings as-they-move, for sniping and tighter movements).

Both are arguable for usage and both can utilize the DPI settings/changes possible on modern mice.
You must find your own movement type and movement rate, set by those three locations previously stated.

Once you set the mouse how you like it – whether you switch DPI settings on-the-fly (to make your character scan slower or faster, switching between scoped and non-scoped, for example) or whether you keep one DPI setting and alter how fast you move the mouse – you will find that you can aim/scan/hit a lot better (and also not get tired as fast).

Tip: Don’t forget to turn off any Mouse Acceleration (The kind that moves your mouse pointer farther on the screen if you move the same amount of space on your desk, only faster)… This only adds to the difficulty in scanning/aiming and makes it harder to build up muscle memory for your mouse (such as, “I move my mouse this far, and my view onscreen moves this far”).

The only recourse, other than doing the above and taking all of the above steps, is V.A.T.S….(at least, to be totally comfortable and ‘reach your full potential’ with the Mouse (wow this is starting to sound like an Infomercial, sorry about that haha))

But, try to have fun exploring it – find “You” in your mouse movements – and have fun learning how “You” play!

—–
Note, Dear Reader, that I am not trying to ‘be pompous’ or ‘brag’ here, with this posting… I merely stated my ‘qualifications’ at the beginning, to show that I learned a lot over time and that I had personally found some effective ways to improve playing, with the Mouse (especially in the past). 
I do not wish to sound like to ‘know everything’ as well – and indeed can learn more – I just wanted to share what I did learn over time and hope that this might help others out, too. If you are an experienced FPS player (‘First Person Shooter gamer’), then you no doubt already know most of these concepts (or have figured them out on your own). 
I should state that I am also nowhere near as good as I once was [being 40 now, alas, age occurs to all..]. Where I once could out-shoot almost anyone, regularly doing 180s-to-instant-headshots (as stated previously), I now regularly get my butt handed to me in games like Overwatch, CS:GO and the Battlefield series of games [although I can still get Top Spot on The Board at times! heh]. 
Still, I wanted to try to help others… and I hope that this posting helps anyone improve their mousing (and killing/winning), if that is what they desire to do. 
I always like helping others and teaching others what I can… “The wiser mind mourns less for what age takes away than what it leaves behind.” ~ William Wordsworth (1770-1850)

SYITG

Popcorn Cart, Warren, Ohio, circa early 1910s

https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

Training Biceps and Triceps with Fat Circular Bands

If you want to take your guns to the next level consider adding in band training.    Those flat circular bands you see in the MX4 Area of the club are serious training tools!    These bands provide the advantage of increasing resistance throughout the range of motion to challenge your muscles in a different, yet complimentary way to free weights or machines.

There are a number of ways to trains biceps with bands from the most simple which is just standing on the band with feet spread and holding the upper loop of the band on both or one and handing and curling up and down.      You can also stand  with one or two feet in the center of a band and grap the two looped ends and curl the end/ends up to pump up those biceps.       Another option is to attach band handles to the band to allow you to use even more resistance.     Standing on one foot in the enter of the band will give less resistance than standing with two feet spread apart.

You can also attach a band to an immovable object like a post or even a door using a door holder (see www.resistancebandtraining.com to purchase one of these.  Another option to create more length is to attach a band low and behind you and then loop another band through this band and attach handles to the band on both ends.      With your back to the anchor grasp the handles and step forward to create some level of tension in the band keep your fee in a split stance and head-up.   Do a bicep curl  with the handles and as you fatigue take small steps back to do drop sets.   This exercise emphasizes the stretched position of the bicep comapred with the single band bicep curl described above.

You can also get an incredible tricep workout using bands using the set-up described above with handles attached to the bands.    In this case turn your back to the anchor grasping the handles with elbows held high by the sides of your heads.   Brace the core while in a split stance and keep the elbows high and motionless then extend your elbows – wow does that create a pump and burn!

To see exactly how to set-up and perform these incredible bicep and tricep exercises using flat circular bands and handles check out this video from resistancebandtraining.com:  https://youtu.be/mF-FbNSPF2Q

WORKOUT ANYTIME in Journal & Topics Newspapers

WORKOUT ANYTIME in Journal & Topics Newspapers in an article titled, “New 24-Hour Fitness Facility Opens In Buffalo Grove.” The article begins with information about the new club and then gives some details about the grand opening. The article ends with information on WORKOUTANYTIME’s plans for expansion in Illinois and some background on Jeff.  Click here to read more or begin below.

New 24-Hour Fitness Facility Opens In Buffalo Grove

A new 24-hour fitness facility recently opened in Buffalo Grove.

Workout Anytime opened at 700 Buffalo Grove Rd. The facility is open 24 hours a day to members with staff on site from 9 a.m. to 8 p.m. weekdays; 9 a.m. to 5 p.m. Saturdays; and 10 a.m. to 2 p.m. Sundays. Members receive a special key card to unlock doors when staff is not present.

(Read More)

My Trip to Batticaloa cont….

My trip to Batticaloa was one year in the making. In March and April of 2010 I was requested to do an Organization Capacity Assessment of a project which ran across 4 districts and to come up with scenarios for independent / sustainable operation. The Scenario that was selected was to restructure the project in to a single operating office in Batticaloa and to have a satellite operation in Trincomalee. It took nearly one year for the project to be restructured and to get a not for profit limited company registered. This is a rare occasion when the funders of the project seeing that the need is still there and that the services delivered through the project are still relevant wanting to develop a sustainable organization to continue to serve the public / target group. My experience in the past has been that most funders / donors say that they want sustainability but don’t put enough money and effort. “Hats off” to the funders of this project; they seem to have got it right.

This trip was to develop a 3 year Strategic Plan for the newly formed not for profit limited company. On my way to Batticaloa I took the routr through Habarana as the A 5 and the A 26 was under repair. On the way I encountered a wild elephant on the main road at around 2 PM. (See my earlier post for a photo of the Elephant) It is rare to see the elephants on the road during the day. However during the night I have come across them more frequently.

The assignment went as planned and now I have to develop the documentation (Strategic Plan and the Process Document). On my way back I took the A 5 and the A26. The authorities are developing these roads really well. These roads will be fantastic to drive on once completed. It is a scenic route.

The view from the A 26 Road

WORKOUT ANYTIME on Entrepreneur.com

Bill Aicklen, owner of four WORKOUT ANYTIME locations in Georgia, was recently featured in Franchise Players, Entrepreneur.com’s Q&A interview column! Bill discusses his background as a franchisee, challenges he’s faced and why he chose WORKOUT ANYTIME as the business model to get behind. Read the full interview here!

Overweight and Food Sensitivity Rule No 1: Delayed Reactions

These are the single most common cause of false fat.

Arguably, delayed food reactions cause as many health problems as some of the most horrific of life’s various risk factors, such as smoking or stress. The effects are often subtle and accumulate slowly, but the harm is undeniable. Without a doubt, delayed food reactions cause weight gain. Because 300,000 people die each year from obesity-related problems, anything that exacerbates weight gain is a serious issue.

Therefore, the average person’s ignorance about delayed food reactions is a serious public health problem. Don’t let yourself be a victim of this lack of knowledge!

Delayed food reactions are very similar to classic allergies. The biggest difference is that when you have sensitivities, you often don’t notice symptoms right after you eat. Sometimes it can take as long as three days for symptoms to appear. The reason for the delay is that this type of food reaction is caused by a different antibody than the one that causes classic food allergies, and it takes longer for allergens to come in contact with this antibody. This antibody, IgG (or immunoglobulin G), is found only in the bloodstream, so food molecules need to reach the-bloodstream for problems to occur. As long as food macromolecules stay in the digestive tract, no symptoms may appear. Sometimes food molecules move out of the digestive tract almost immediately, but sometimes they don’t.

Diet Start

When reactive food macromolecules do eventually meet up with IgG antibodies, the antibodies wage the same basic type of battle fought by IgE antibodies, which cause classic allergies. The IgG antibodies call the immune system into the fight, and histamines and other chemicals are released, causing swelling and other symptoms.

The IgG antibodies are by far the most common antibodies in the body. They’re three times more common than the IgE antibodies that cause classic allergies; that’s one reason delayed food reactions are more common than classic allergies.

Because IgG reactions are delayed, people are often unaware of their real cause. If you feel a symptom on Monday morning, it may be hard to link it to something you ate Friday night.

Another reason people are often unaware of their IgG reactions is that these reactions often don’t occur in obvious places, such as the skin, as do classic IgE allergies.

Even though an IgG reaction may not be obvious, it can still be very harmful. For example, if you’re allergic to bee stings and get an IgE reaction on your skin from a sting, you’ll be sure to notice and treat it. However, an internal IgG reaction to a food may ultimately cause you much more generalized, systemic swelling than a bee sting; it’s like getting a bee sting to the whole body. But because your reaction is spread over your whole body, you may not be very aware of it. All you’ll notice is that you don’t feel good and have more bloating and swelling. After you’ve read this book, though, and learned what to look for, I guarantee that you will notice how drastically food reactions affect your body.

Another antibody that can cause delayed reactions is IgA. IgA fights at the front lines — at the mucous membrane sites and in the digestive tract itself — trying to stop allergens from being absorbed by the body in the first place. To do this, it stimulates secretion of mucus, which blocks absorption.

Studies show, though, that almost half of all Americans don’t secrete enough IgA. Non-reactive people secrete 3,000 to 5,000 mg of IgA every day, but some reactive people don’t secrete much at all. If you’re low on IgA, sooner or later a reactive food molecule will work its way through your intestinal wall and cause a reaction. The more reactive foods you eat, the more likely you’ll be to use up your supply of IgA and lose your front-line force against food reactions.

Therefore, if you do ‘cheat’ and eat an allergenic food, it’s smart not to eat too much of the food. One jam doughnut might get blocked by IgA, but three doughnuts may overwhelm your forces and push you past your allergic threshold.

Another factor that depletes IgA is use of certain medications, including antibiotics, antacids, ulcer drugs, cortisone and aspirin. Again, as you can see, it’s not just what you eat that can hurt your metabolism and make you fat.

In Defense of Classroom Technology

Usually when I talk to people about the fact that I teach in a 1:1 iPad classroom, they think that’s awesome. But now and again, I’ll run into someone who thinks handing a kid an iPad in school is an atrocity, and I feel like I have to defend the work that I’m passionate about. This happened to me recently at a social event when my attempts at small talk quickly turned into a debate about what we’re “doing to kids today.” The naysayers certainly exist, and this particular encounter made me pause to think about why I feel so strongly about this topic.

Here are some of the reasons I feel it’s in the best interests of both students and teachers to maximize the use of classroom technology.

My students explore constellations on their iPads.

1. It teaches real-world problem solving skills.
Being good at technology is largely a result of being willing to experiment and fail. I wasn’t born knowing everything there is to know about iPads or Evernote or Edmodo — I’ve learned by trying different things and seeing what worked and what didn’t. When I can’t figure it out on my own, I talk to others or look for the information I need online. Now I get to see these skills in my students. Whenever they need to troubleshoot something, they work together to find a solution. They don’t give up or think it’s impossible. In this high-tech world, these skills are going to be incredibly valuable.

2. It facilitates better communication between home and school.
If parents want to know what we’re doing in class each day, they can find all of our homework and activities on our class website. If they want to monitor grades or see what assignments are missing, they can look on Edmodo. If they want to know what their child’s behavior was like at school today, they can look on ClassDojo and get a report. If they want to know what their child sounded like reading a 4th grade leveled text at the beginning of the year compared to now at the end of the year, I can pull up the child’s audio recordings on Evernote. Technology makes it easier for parents to know what’s happening in school, and I’m happy about that.

3. It makes students better writers.
Without question, writing skills are incredibly important. When I think back on all of the essays I had to write in high school and college or the cover letters I wrote to get opportunities I have today, I know that my ability to write mattered. Technology makes students better writers for a variety of reasons:

  • It makes them more open to revising and publishing their work when they don’t have to handwrite the whole paper over again.
  • It teaches them typing skills that will make them more efficient at writing and therefore able to write more. 
  • It gives me more opportunities to give them feedback about their writing because I can easily collect samples at various points. I can have them turn in a copy of a draft wherever they’re at without interrupting their work because I don’t have to collect a notebook. 
4. It keeps kids engaged.
I used to have students write book reports. Now I have them write book blogs on KidBlog and make book trailers using iMovie. It’s basically the same assignment, but now students are motivated and engaged to complete it. They have an audience of their peers that makes their work more authentic, and it’s something that can’t be easily replicated without technology. The effort and outcomes my students experience because of technology is something that should be encouraged.

5. It benefits all types of learners.
I think a lot of the criticisms of technology assume that students are being passive consumers of it — watching videos or playing video games all of the time. Without question, technology could be used as a high-tech babysitter, but that’s not how it’s being used in my classroom at all. When my students use their iPads, they are active and interactive, and they’re expressing their creativity in so many ways now. They’re making movies, writing stories and articles, becoming budding photographers, and interacting with the world and each other in new and exciting ways.  They’re still collaborating and developing the interactive social skills necessary to be productive citizens of society.

6. It keeps everyone more organized.
I can’t begin to describe how many minutes I’ve lost over the last 6 years because students couldn’t find a paper or a notebook. Then once it was turned in, I’d have to shuffle through piles of nearly 30 to find what I was looking for. Add to that the fact that students work at different rates and finish tasks at different times, and you have the potential for an organizational nightmare.

I’m a pretty organized person, but without any hesitation I can say that technology has made my students and me substantially more organized. Everything we need can be found on an iPad or a computer. There isn’t instructional time lost finding materials or planning time lost figuring out where I filed that lesson idea or who is missing work. It’s all in one spot.

7. It allows me to give better feedback.
My students recently took a multiple choice test on Edmodo. I’d entered the correct answers before giving the test, so when I went to look at the results, it was already graded for me. Rather than spending time rifling through a pile of papers to mark answers right or wrong, I was able to type specific feedback to the students. For example, when several students missed question #6, I typed 2 sentences explaining the problem with the answer choice they selected and why the other choice was better. With the help of copy and paste, I was able to give that feedback to all applicable students in less than 5 minutes. How often do you think I could accomplish that in a world where I had to handwrite the comment 15+ times? It wouldn’t happen. I wish it could, but it’s not feasible.

8. It gives me more information so I can help students.
I routinely ask my students to solve math problems and explain their thinking. Sometimes they have to explain it in words and sentences, but other times I let them use their iPads to make short (30-60 second) videos narrating their solutions and the steps they took. Similarly, when I do reading assessments with students, I can use my iPad to record the student’s voice as the student reads. This creates an artifact that I can listen to, share with parents or RTI committees, and analyze in a way that wouldn’t be possible absent technology. It’s some of the best evidence of a student’s ability, and it helps me identify strengths and weaknesses so I can give students the support they need.

9. It makes me more efficient.
Anyone who’s a teacher can attest that this job sometimes borders on impossible. Teachers take on so many roles and have so many responsibilities that the stress can be overwhelming. I think that’s a major factor in why so many great teachers leave this profession within the first few years and why many capable individuals are deterred from entering the field. In my experience, technology has made this all more bearable. I don’t have to waste time shuffling through paper or hunting for files anymore. I don’t have to haul carts — literally carts — of student work and planning materials home anymore. I can find exactly what I need wherever I’m at because everything is electronic. It’s made me much more productive and efficient, and everyone benefits as a result.

10. It’s appropriate for the world we live in.
I know a lot of people lament the fact that we’ve moved into an age of technology. I’m not one of them, but even if I were, I recognize that there’s no going back now. I’d rather introduce students to technology in safe, structured ways where I can guide them through the perils and pitfalls than leave them to struggle on their own. I also like that I can show them how to make technology work effectively for them. I’m facilitating students to be productive, creative, and responsible users of technology, and I’m not confident they’d all get there on their own.

It’s not technology that’s an issue — it’s how the technology is being used. I’m certain that the ways my fourth graders use their iPads will make them better informed, more capable citizens down the road. Is it the only way to teach them? Absolutely not, but the advantages of using technology in the classroom far outweigh any disadvantages the devices bring.

What are the arguments for or against using technology in the classroom that you’ve heard? I’d love to hear your thoughts in the comments.

Workout Anytime on WBIR-Knoxville Afternoon Show

WORKOUT ANYTIME on WBIR-Knoxville Afternoon Show. Every Thursday WBIR has a healthy living segment that is sponsored by the Governor and April Nitzsche was the guest for this week on their show. April spoke about how viewers can be healthy throughout the day when they have a few minutes to spare to stay in shape in 2014. April talked about how to live healthy, and offer tips to viewers.  You also can view the video here.

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    It’s Not Just You™ – The Elder Scrolls: Legends A.I. Seems Pretty Hard To Beat Now [Noticed]

    Just a little notification that, if you are playing TES:Legends recently and find it’s quite a bit harder to beat the computer opponent (AI/NPC)… It’s Not Just You™

    I was in the Beta for The Elder Scrolls: Legends; but never got around to finishing my “First Impressions” article on it [as is how it usually goes for me and posting, heh]. Legends has been out of Beta for a few months now, and if I could summarize the game in one paragraph, I would say that Legends is a Virtual Collectible Card style game, that is ‘both Single-Player and Multiplayer’ (you can play against other human opponents, in matches and “Arena” rounds – but you don’t have to, you can entirely play against the computer AI both in single matches and in ‘Arena playoffs’, if you desire). It is actually more of a “Card Collecting” game than a “Trading Card” game – as I have not seen a way to trade with human players yet – but that is similar to other ‘virtual card games’ of this genre, like Hearthstone and Gwent (“World Of Warcraft” Lore and “Witcher” Lore -based virtual card games, respectively). The game cannot be played Offline and you don’t actually get any ‘Real Life’ Cards of any form; but that again, is the same for the other virtual card games mentioned.

    After playing a little bit when it was first Released, I didn’t play Legends for a few months, only recently picking it up again to play a bit – and boy was I in for a surprise!

    The computer AI as it is now, offensive and ticked off
    (Cropped Screenshot of art by Bethesda Game Studios)

    Perusing the Updates for the game (which there seems to be one of every few weeks, a nice thing to see for a game!) – there was an Expansion for the game released at the end of June 2017 (Heroes of Skyrim) – but nothing that says, “We felt the AI was a little too easy to beat, so we beefed it up a bunch and it also will pull cards out of it’s butt hat, getting exactly what it needs at times, to win!” – so I’m not sure when this AI change occurred… [I didn’t play for a good few months or more, so sometime around mid-2017, I reckon].

    Judging by the recent changes to the Computer Opponent A.I., get used to seeing this screen more often…

    Legends is a fun game still, with it’s flashy effects and nice sounds, not to mention the wonderful Elder Scrolls-style ‘realistic’ art on everything; I personally don’t mind if I am going to be losing to the Computer a lot more; but it would have been nice to see a more obvious notification of it somewhere – or a way to perhaps adjust it (via a Slider or Dial or anything..).

    I do think the AI was ‘just a little too easy’ at first, making simple moves and not many combos, losing a lot more than it won against me – but now it seems pretty darn hard – almost too hard, pulling multi-combos everywhere and buffing cards a lot more and getting ‘the perfect card’ or ‘just what it needs’ at times, to pull off a win (as though, instead of the AI having a prepared set of cards, cards seem now ‘generated as the game goes’, to “keep it competitive”). I can still win once in a while against the AI in Solo Play and Solo Arenas – and I understand that Bethesda might want to make things ‘a bit difficult’ to encourage selling Card Packs; but… Dearest Beth: It’s “Just A Little Too Much” Now… [in my opinion]

    The ‘new’ Computer Opponent A.I. at work, busy buffing its’ cards to no end

    I won’t stop playing, of course – and I won’t stop getting Card Packs once in a while (for all three of the Collectible Card Games mentioned above, when I can) – but I just wanted to mention this, for others too; that if you noticed the Computer seemed ‘tweaked’ lately and is now pretty darn hard to beat as an Opponent in Legends – It’s Not Just You™…

    If I play some Versus matches, which I do from time to time – See You In The Game!

    Addendum
    Changes Seen:
    – Increased Combination plays (Buffs, Debuffs, then Attacking)
    – Increased Healing cards (Health added to Opponent)
    – Highly Increased ‘instant-kill’ or ‘unsummon’ type “Destroy A Creature” cards (Piercing Javelin, Lighting Strike, Execute, Cast Out, etc)
    etc.

    The trip to Hyderabad India

    I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

    I have applied for my visa nd waiting to collect it. will do it tomorrow.

    Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

    For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

    The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

    Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

    Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
    (GTAMblog7Photo SweetFX Preset, made available Soon™)
    Click to see Full Size
    Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
    (GTAMblog7Photo SweetFX Preset, made available Soon™)
    Click to see Full Size

    ReShade by Crosire (reshade.me)
    SweetFX by CeeJay.dk (ceejay.dk)
    Game Material by Bethesda Game Studios (bgs.bethsoft.com)
    Captured by Troy from The Game Tips And More Blog

    Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

    It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

    This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
    Right back at ya’, Beth! 
    “Thank You” ~ Sincerely, The Game Tips And More Blog

    Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

    Workout Anytime Featured in Franchise Times

    Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

    The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

    Click HERE for the full article or begin reading below:

    Nest Eggs

    Done right, a rollover of retirement funds can be smart option

    By: Jeffrey McKinney
    More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

    Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
    Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

    Wauconda WORKOUT ANYTIME Opening Doors Soon

    Wauconda WORKOUT ANYTIME Opening Doors Soon

    The new Wauconda WORKOUT ANYTIME, owned by Jeff Cercy will be opening their doors by the end of the week. The club, located on Liberty Street in the Jewell Osco shopping center, will be celebrating their grand opening on March 22nd. The equipment is all in place and the final touches on flooring and painting has all been completed.

    The public is welcome to come out and see the new club. Those interested in joining can call 847-526-4088 or register on the club’s website: http://workoutanytime.com/locations/wauconda.

    Multi-Protocol Label Switching (MPLS)

    Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

    Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

    Internet 2010

    When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

    To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

    Combining Routing and Switching

    Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

    When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

    cool little trailer with a hinged top

    https://www.instagram.com/bikergeardotstore/

    And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

    Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

    Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**:

    The popup that comes up for some people, every time they start Vegas

    The fix is a simple one, originally suggested by a Sony Forum Moderator and quoted/forwarded frequently on the official forums, to those who come and ask the question there. Although it seems more like a ‘workaround’ than a ‘fix [in my opinion], it works just fine and since it is officially supported by Sony and I just tested it for verification myself [that it does indeed solve the problem], so now I share it here with you:

    • To stop the EULA popping up every time you start Sony Vegas, simply open Windows Explorer and navigate to the folder where you installed it on your system. 
    • Then, find the file that is titled, simply, “eula”. There will be no Extension showing, even if you have the Windows option to ‘Hide Extensions For Known File Types’ turned off. 
    • Rename (or delete) the file. That’s it! 

    Now the EULA cannot pop up anymore and won’t, every time you start up Vegas to edit your game captures.

    **Although this example shows steps for the Movie Studio version of Sony’s Vegas Video editing line, the EULA ‘fix’ is the same steps for Vegas Pro, Vegas Edit or other versions of Vegas

    Enjoy popup-free video editing once again – and See You In The Games!

    BLACK WALL INTERIORS DESIGN IDEAS FOR A MODERN HOME

    Are you brave enough to try a deep impression on the black walls at home? A dramatic effect can be created on the walls of blacks is unique, and it takes courage and commitment to create an interior decorated with beautiful black walls. A black-painted walls, chalkboard walls, elegant black background, or even some black accents can change the look of the interior.

    High ceilings and lots of natural light conditions seem to enjoy blacks the walls in my room, but even the smallest spaces can look modern and stylish, if all other elements are chosen to enhance the contrast and the dark walls. Some of you are going to see the inside is a piece of furniture in bright colors and decorations that mitigate the effects of black walls, others will benefit from natural light, some are painted on wood or walls, wallpaper, and applications – but all ideas have two things in common: the courage and well-designed structures.

    BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

    BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

    The carb connection

    Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

    THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

    1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

    2. Double sugars, or disaccharides: lactose (milk sugar)

    Diet Start

    3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

    The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

    So why are carbs the bad guys?

    Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

    The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

    Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

    Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

    Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

    I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

    Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

    and

    Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

    Both are completely free, so go get them now! GOGOGO

    [Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

    Health Concern: FAT? continue…

    How much Fat do you Need?

    Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

    Diet Start

    Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

    This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

    At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

    When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

    Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

    CONCEPT KIDS ROOM PAINT COLORS DESIGN

    KIDS BATHROOM PAINT COLORS

    Looking for ideas for decorating Kids Room Paint Colors? Enter a space about the longevity of choosing background elements that are long lasting. Then use the equipment, bedding, area rugs and cheap to create themes easily hangeable. Unlike other rooms of the house, which mainly reflects your personality, decor rooms children requires slightly different approach. If you are a first time parent or a veteran, decorating baby rooms are not childs play.

    This is a very complex process in which an adult is to incorporate all the safety features and mix with a childhood fantasy. The room is a device identification of the child, not yours. But the change of the children, then you need to think ahead: the design is easy to change a child of five years or two? There is room for storage, research, animal or doll collections, or a wrestling match?

    First, consult with the child. Be sure to consider the child likes or dislikes when decorating their space. Decorating the kids room paint colors is a work in progress – planning begins before birth and continues throughout childhood. You can be as creative and on top of your child you are dynamic and playful colors work well in a child’s room. Always paint childrens rooms with a semi-gloss, if the walls are easy to dry without being too bright.

    Regarding storage, check your local do-it-your-own for a wide range of affordable solutions. As children grow, learn, play and explore their environment should respond. Children will love the exciting makeover, because they focus on their preferred interests in all age groups. As your child grows, ask for their input for kids room paint colors.

    KIDS ROOM PAINT COLORS
    KIDS BEDROOM PAINT COLORS

    Limitations of Organization Capacity Assessment (OCA) tools

    Since April of 2002 I have been involved with Strategic Planning, Restructuring, Re-engineering, Organization Revival, Organization Analysis, Organization Capacity Assessment and Organization Development projects across sectors and boarders. Most of the tools that ate used for this purpose can be traced back to a few general tools which were made famous in the latter part of the twentieth century. Increasingly I have felt the need to further customize these tools in a way that they become more relevant to the current context. This customization has been happening in the past and continues at a faster rate at present.

    The single biggest reason that I attribute for this need is that; today we live in a technological age which has some peculiar characteristics. The characteristics are that we need to innovate and improve not only our products but also how we do things inside the organization at a faster rate. This is nothing new; most of the thought leaders of our time have made big bucks selling this message repackaged with additional jargon. These characteristics currently affect most of the knowledge based industries. However as time goes by their affect on every organization be it government, private or development sector will grow exponentially.

    As mentioned above since we have to improve the way we do things inside an organization we run into the human dimension of things. We are also aware of the “change management” that needs to happen inside the organization to facilitate the “keeping up” with the changes that drive our organizations toward bigger and better things. However we don not consider that some of the changes required may be limited by the knowledge / intellectual capacity of the staff (here staff include owner directors, CEOs, CFOs, CIOs, and CKOs). In some organizations we may have staff that has reached the limit of their intellectual prowess. When an organization reaches this level it is said to have arrived at the door step of “mediocracy”

    The current tools that most of our contemporary consultants use for organizational diagnosis will not help identify this issue of “mediocracy”. However there are some characteristics that are peculiar to these organizations where they have reached the glass ceiling of intellectual limitation / mediocracy. Let me take a few cases from assignment that I have done in the past and elaborate this.

    The 1st example that I would like to take is an ICT company that started over 25 years ago. The organization has been fairly successful in keeping up with the changes in the ICT technology; and has been making above industry average, earnings per share. However in the early 21st century there was a need to re-strategize to keep up with the faster pace of change in the ICT technological environment. I was invited to develop a new strategic plan for this organization. By this time I had already identified some of the key markers of an organization that has reached its pinnacle based on the intellectual capacity of its staff; and I was able to identify them in this organization during my first meeting with the senior management of the organization. I suggested to the Managing Director who invited me that the organization not only needed a new strategic plan but it also needed a corporate renewal plan and a VRS. This suggestion was not looked at favorably and I was asked only to develop a strategic plan.

    The markers that I identified were:

    1. The organization starts adding parallel value chains to the existing organization structure.

    2. Organization does not move forward or backwards in the value chain

    3. The organization does not spawn new businesses that are “stars” / neither are they known for any innovation (other than the innovation of some of the principles / 3rd party brands that they may represent)

    4. History of young star performers leaving the organization on a continuing basis

    5. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.

    6. Long serving staff in a particular discipline / technology / expertise

    7. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise

    8. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles

    9. Large number of managers based on technical areas as opposed to value addition

    10. Staff do not take up higher education or professional development

    11. Average age of staff moves parallel to the age of the organization

    The above 11 markers as identified by me is a clear indication that the organization has run out of ideas and the incumbent staff are not able to get the organization out of the hole that it has dug for itself. They need fresh blood and a new playing field to continue being profitable. In its current state it will just survive but never reach its former glory / heyday it enjoyed in the beginning of its existence.

    The 2nd example that I would like to take is a research organization set up to do applied economic research. This organization too has been in existence for over 30 years and had enjoyed considerable success in the early part of its existence. This organization too displayed the following common markers as identified by me earlier.

    They were:

    1. Long serving staff in a particular discipline / technology / expertise
    2. History of young star performers leave the organization on a continuing basis
    3. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.
    4. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise
    5. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles
    6. Large number of managers based on technical areas as opposed to value addition
    7. Average age of staff moves parallel to the age of the organization

    In addition they displayed the following:

    1. Doing (research) work in traditional / theoretical / safe areas as opposed to doing applied / non traditional / contentious issues based research (Not competing in your space as mentioned in the mission but trying to compete in the space that you perceive to be good at / running back to mama so to speak; relying on your academic training as apposed to innovation)
    2. Contempt / arrogance towards younger organizations (doing applied research) and relying on the age of the organization and past performance as a mark of value (of research) as apposed to quality, (rigor), and relevance to current context.

    The above may be considered anecdotal by some; but over the past 8 years across 19 countries I have come across these markers with increasing frequency across private, government and not for profit / development sector organizations which are not considered to be in the knowledge driven sectors.

    The question is; are we at the stage that this initial varying degree of prevalence of the markers in other sector may become the norm across organizations and sectors? Only time will tell. However, I am convinced that we are seeing the beginning of another divide that will start another wave of brain drain as organizations start to realize this phenomenon and start to poach intellectual staff from all over the world.

    And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

    Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

    Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

    However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

    Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
    when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

    I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

    I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

    I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

    The “Welcome” Section of VideoStudio
    (Click to see Full Size)

    Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

    The Corel VideoStudio X10 Preferences Window
    showing the Default Startup Area/Section which is shown when the program starts
    (Click to see Full Size)

    A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

    Example of Corel VideoStudio x10 Starting Up In The EDIT Section
    (Click to see Full Size)

    Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


    [VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

    Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

    ~Troy from The Game Tips And More Blog


    [I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


    Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

    How to Create a Lower Body Band Training System

    Resistance training bands provide a great strength curve that matches the lower body strength curves nicely.   Specifically, the more you stretch a band the higher the level of resistance you have to overcome.   In the case of the key lower body movements such as squats, deadlifts and lunges this matches the strength curve of these key movements meaning that the muscles are capable of producing the highest levels of force at the top of the movement when joints are extended and muscles in their shortest position.
    The trick is how to apply band resistance to these movements and other functional movements such as jumps.  While there are many different techniques for accomplishing it – one of the best is to create your own lower body band loading system using a large band as a belt and smaller band/s looped through it and onto your feet to create load from the hips down.

    This system puts no load on the spine,  and it is easy to increase or decrease load based on band sizes used and number of times you wrap the band around your feet.
    It travels with you as you move for extra load for all lower body movements including squats, lunges, and deadlifts.    It is also a portable jump training system that is easy to create, and for facilities with the reACT Trainer it is a fantastic way to create additional overload on the reACT Trainer while keep the hands free!

    Click here to see step by step instructions for how to use bands for this set-up:   https://www.youtube.com/watch?v=zkAMGtjkVm4

    Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

    [NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
    FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

    Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


    For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

    Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
    (Click to see Full Size)

    What is The Train?

    ‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

    Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

    When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

    Killing the Boar champion while on the Train in Queensdale
    (Click to see Full Size)

    If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
    The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
    As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

    [On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

    Killing the Troll champion while on the Train in Queensdale
    (Click to see Full Size)

    How does one ‘get on’ The Train? 

    First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

    Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

    The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
    (Click to see Full Size)

    The Route that The Train takes usually runs like this (repeatedly):

    • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
    • Kill the Boar champion in the hills there, NW of the Hunting Lodge
    • Fast Travel to the Vale Waypont and head into the caves just to the west
    • Kill the Troll champion inside the caves of Altar’s Windings
    • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
    • Kill the Rotting Ancient Oakheart champion at the forest’s edge
    • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
    • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
    • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
    A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

    The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

    When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

    Killing the Oak champion while on the Train in Queensdale
    (Click to see Full Size)

    A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

    Killing the Spider champion while on the Train in Queensdale
    (Click to see Full Size)
    That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

    [UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
    For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
    [UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
    [UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
    Boar-Troll-Bandit-Oak
    I am working on a new, updated version of the map and will insert it here when finished.
    For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

    See You In The Game!

    Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

    Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

    See You In The Games!

    Innovative Office Furniture Sets Were Designed by Vitra

    These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    Innovative Office Furniture SetsInnovative Office Furniture Sets

    This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

    And More: Deals and Sales – 2014 Summer Super Sales

    Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

    Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
    (Click to see Full Size)

    Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
    (Click to see Full Size)
    Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
    [For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
    I hope you find something you like and See You In The Games!

    WORKOUT ANYTIME on FOX 56 Lexington

    WORKOUT ANYTIME on FOX 56 Lexington

    Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
    View the full segment here.

    How to Optimize the Benefits of Vitamin D Supplementation

    Vitamin D is constantly in the news lately and for good reason.    Optimal levels of Vitamin D have been linked to a host of benefits including prevention and treatment of many key diseases ranging from Osteoporosis to improved heart health with reduction in heart attack risk to prevention of many different types of cancer.
    The ideal way to get optimal levels of Vitamin D is to let your body create it through Safe Sun Exposure (see previous blog on this subject here:  http://workoutanytime.blogspot.com/2016/08/the-facts-on-safe-sun-exposure-and.html  However this is easier said then done, and too much sun is clearly a strong risk factor for skin cancer!      Enter Vitamin D supplementation.
    The amount and form of Vitamin D supplementation has changed substantially based on lots of emerging research.    The form that should be taken is Vitamin D-3 NOT D-2 form and all experts agree on this!     However when it comes to dosage things get much trickier.      The confusion comes because Vitamin D is really a powerful compound and functions as a hormone in the body.    As such it has profound impact on virtually every system in the body.    In addition you can overdose on Vitamin D supplements so more is NOT always better!
    Ideally you should order a blood test and test your levels.    The test you want is called a 25(OH)D blood test and is offered by all major labs.   You can either ask your doctor to order this test for you OR you can order an in-home test.   You just prick your finger and put a drop of bloo on the enclosed paper and send back in to the labs.    You can also your own blood test online and go to a lab to have blood drawn in the same way your doctor orders the test.   For more information on testing go here:  https://www.vitamindcouncil.org/testkit/?gclid=Cj0KCQjwh_bLBRDeARIsAH4ZYEPhv0MVkO5_S7USZZ8bwVlt5A3vPWGbBFFIbJiB8Wtva0x-IDH7UmQaAlGkEALw_wcB#
    Ideal versus Acceptable Blood Levels of Vitamin D

    There is a big difference between what is considered “acceptable” or okay and ideal blood levels.   Here are the classifications of different blood levels of Vitamin D. according to the Vitamin D Council:
    0 – 30 ng/ML is very low and considered a deficiency
    30 – 39 ng/ML is better but still insufficient for optimal health and disease prevention.
    40 – 100 ng/ML is optimal
    Above 150 ng/ML is toxic!
    The key is to test and if low take a supplement then retest 2 – 3 months after regular vitamin d use because each person is different in how much supplementation they need based on many factors including sun exposure and skin type.     The RDA for Vitamin D for infants is 400iu.    For Children 1 – 13 and adults through age 70 the RDA is 600iu and for those over 70 the RDA is 800iu.
    Unfortunately, this is way too low to get many people into the sufficient much less optimal range so testing is really worthwhile.   In many cases people need 4,000 – 10,000 or more iu’s per day for at least a month to get where they need to be for optimal health!
    Preventing Vitamin D Toxicity through the Co-Administration of Vitamin K-2

    Like many vitamins Vitamin D has a co-factor or other vitamin that helps it perform its function better and in a more balanced fashion, and that other vitamin is Vitamin K-2 (not to be confused with K-1 found in many plants).    In an ideal world, you can get all the Vitamin K-1 you need from eating plenty of green, leafy vegetables, and your body can turn it into K-2.   Unfortunately, this conversion is lacking in many people.
    More importantly K-2 is not easily toxic and can be taken with Vitamin D.    K-2 is best taken as a supplement as MK-7 version which has been heavily researched and shown to improve bone health and prevent arterial calcification which can potentially occur with too much Vitamin D.     For a more complete understanding behind how K-2 works with Vitamin D and why it is a great idea to take the MK-7 form of K-2 with Vitamin D check out this article from Dr. Mercola:   http://articles.mercola.com/sites/articles/archive/2011/03/26/the-delicate-dance-between-vitamins-d-and-k.aspx

    Taking 100 – 200 mcg per day of Vitamin K-2 will help optimize the effects of Vitamin D and minimize risks associated with Vitamin D Supplementation.

    The Benefits of Jump Training

    Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

    Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
      
    There are three distinct phases to jump training:

    The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
    The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
    The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

    Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

    It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

    Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

    Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

    There are many benefits to jump training including:

    Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

    Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

    Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

    Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

    Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

    There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


    It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

    Atlanta Blogger Meet Up

    Yesterday, I had the privilege of meeting some fantastic teacher-bloggers as part of the Atlanta Blogger Meet-Up.

    If you ever get a chance to meet up with other teacher-bloggers, I’d highly recommend doing it! It was wonderful to meet so many sweet and enthusiastic teachers who share similar interests, and now I can finally match names and faces with the blogs that I read all the time.

    We met at the Swan Coach House in Atlanta for brunch, and it was wonderful. Amanda from Collaboration Cuties made us each a placemat with everyone’s name on it.

    And Stacia (the other half of Collaboration Cuties) made us name tags.

    Jivey from Ideas by Jivey made us a little goodie jar filled with treats of both the sugary and teachery kinds.
    And Elizabeth (Fun in Room 4B) and Brandee (Creating Lifelong Learners) made us this adorable to do list that is dry erase. 
    There were 9 of us in all, and I’m so glad that I went. I’m typically a really shy person, but it felt like I was getting together with old friends! I’m so grateful to be a part of the teacher blogger community, and I love learning from other teachers. This group in particular has so much to offer, and if you don’t already follow each of these bloggers, you’re definitely missing out.
    From left to right:
    Amanda – Teacher at the Wheel
    Jivey – Ideas by Jivey
    Brandee – Creating Lifelong Learners
    Denay – The Gemini Teacher
    Liz – Polka Dot Firsties
    Stacia & Amanda – Collaboration Cuties
    Me!
    Elizabeth – Fun in Room 4B
    If you missed out on the meet up, no worries — I have confidence that this will become an annual tradition. And for those of you who are interested in classroom technology, the International Society for Technology in Education (ISTE) is holding its annual conference in Atlanta next summer on June 28 – July 1. Wouldn’t it be great to have a teacher blogger meet up around that? 
    After lunch, most of us ventured to Ikea where I once again spent too much money on my classroom despite not needing anything in particular. I’d show you all of my finds, but I’m going to wait until my complete classroom reveal. Given that I start preplanning THIS THURSDAY and have students on August 1, that really won’t be too long to wait!

    Have a great week!

    Eat more and more, do you know chemicals in foods blow you appetite?

    In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

    Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

    Diet Start

    Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

    Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

    Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

    Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

    Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

    Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

    Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

    Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

    Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

    Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

    Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

    Just a quick tip for when it seems like you cannot record your game ‘at all’:
    64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

    See you in the games!

    TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

    This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

    First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

    So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

    Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

    I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

    RCT2 testing (codecs/settings) with Bandicam (Samples)

    Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

    Recorded game: Rollercoaster Tycoon 2 (RCT2)

    Some recording data (per codec) for this test:

    MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

    MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

    MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

    MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

    *XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

    Brief analysis of sample video:

    • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
    • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
    • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
    • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
      (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
      Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
      *More on this issue and x264 recording in a future article
    • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

      Some related articles:
      Game recording comparison with various codecs and settings (Minecraft)
      http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
      The ghosting/blurring effect when rendering in Sony Vegas products
      http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

    There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

    • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
    • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
    • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

    That’s it!

    Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

    I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
    See you in the games!

    It’s Not Just You™ – Paladins (Beta), Having Issues Not Starting or Not Running In 64-bit Mode, Battlegrounds [Notification, Updated As Encountered]

    [Currently, this post is mostly in Text-Only Mode, to speed up the ability to publish it… 
    I may return to add some Images and/or Screenshots in the future.
    This post will be Updated for the next few days, as I encounter new related information.]

    If you are trying to play the newest addition to Paladins, Battlegrounds, which is being released in Alpha Testing Stage in their Latest Update – and you are having issues with either (1) the game not launching/starting or (2) the game running in 32-bit mode [which stops you from being able to enter the Battlegrounds, which requires 64-bit mode] – just letting you know, It’s Not Just You™…

    For the past little while, I have been trying to get into Paladins and try out this new Game Mode, and take a look at any new changes; but I have been running into multiple issues with the game itself. If related Paladins Forums ‘everywhere’ (Steam, Reddit, Official Forums, etc) are any indication, many, many others are having issues as well.

    I wanted to take a moment to make this posting because, even though it seems there are a few people that have ‘gotten it running’, there are many others, like me, that have not. I wanted to share this experience and related information, so that others may know that, well… It’s Not Just Them.

    Since I have run into multiple issues and have tries multiple steps so far, I will share them here in Point Form as a list:

    Issues Seen/Encountered:

    • Game not starting [Launcher will start, but game itself will not show up]
    • Game not stopping [Game will not Terminate, Steam says it is Running still, but it is not, or has not started]
    • Game not running in 64-bit mode [Game starts in 32-bit Mode and therefore The Battlegrounds can not be tested/run, as it states in-game “64-bit Mode Required”]
    • Cannot Verify Integrity Of Game Files, via Steam [Steam states to ‘exit any game files or tools’ related to the game, but none are running]

    Steps Taken/Tried:

    • Put “-Use64 [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
    • Put “-dx11” [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
    • Checked “Use 64 bit Client” in Launcher Options [this has never been ‘unchecked’ by me]
    • Verified Cache [‘double-checked’ the game files through Steam, to see if they are what they are supposed to be]
    Unfortunately, since I cannot make the game ‘run in 64-bit Mode and enter The Battlegrounds’ in a repeated a reliable manner – I cannot make a section containing a ‘Fix’ at this time… I will continue to observe various Forums and Support Responses, try various Suggested Steps (from the Developers and other helpful Paladin Players (there are a lot of them out there!)), and see if I can make any progress that results in stable and repeatable game launching and gameplay. If I do, I will return here and add it as a ‘Fix’ section. 
    For now, despite them not working for me/on my system, there are a few isolated people that have had success with some of the Steps listed. If you are experiencing any of these issues with Paladins at this time, try some or all of them above. Perhaps one of them will work for you, too. 
    Good Luck with it – and try to stay positive, remembering – It’s Not Just You™!

    My Trip to New Delhi & Hyderabad Cont………

    My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

    Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

    LIVING ROOM DESIGN IDEAS GET COMFORT

    LIVING ROOM DESIGN IDEAS

    Living room is the most popular rentals for guests and where families come together to end their days of rest after a long week at work or enjoying a TV program together. In most cases, this room is on the floor of a house and is very active. It is therefore essential that this area is decorated in a pleasant environment to ensure the comfort of visitors. When planning a room design, the main and most important factor to decide is the purpose of the room. One thing to remember when designing your living space is that you should feel comfortable in the room and the style, since they will likely spend most of their time in the room. Finally, here are some design ideas that show really got in touch with the style you want.

    LIVING ROOM DESIGN IDEAS

    LIVING ROOM DESIGN IDEAS

    LIVING ROOM DESIGN IDEAS

    LIVING ROOM DESIGN IDEAS

    The Ten Steps of Body Clock Diet

    The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

    1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
    2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
    3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
    4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
    5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
    6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
    7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
    8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
    9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
    10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

    HOME DESIGN WITH STRONG VISUAL EFFECTS

    Architects honey study apartment has a makeover that is quite original. The project is called “Santpere47” and has many interesting features. gold lines and circles to create a wall decoration that invites a lot of fun to watch.

    HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

    HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

    The ceiling is particularly exciting that the pattern is unusual and reminds one of the chambers of the royalties. Storage space is provided unconventional: not a library under the stairs and walls in some places where objects can be placed. The lighting in this apartment is also interesting to compare a second: the hanging lamps are subtle and elegant, and were impressed by the fire escape. The decorative elements are in perfect harmony with the general atmosphere of the house.

    HOME DESIGN WITH STRONG VISUAL EFFECTS

    HOME DESIGN WITH STRONG VISUAL EFFECTS

    HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

    HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

    HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

    HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

    HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

    HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

    Do you have Food Cravings? Food Cravings Test

    • Do you frequently eat until your stomach is uncomfortably full?
    • When you get hungry, does it make you feel tense, weak, or irritable?
    • When you get hungry, do you sometimes focus on one or two specific foods?
    • Do you snack often, usually eating the same snacks?
    • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
    • Diet Start
    • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
    • Do you usually need dessert after dinner to feel satisfied?
    • Do you tend to eat a relatively narrow range of foods?
    • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
    • Do you sometimes feel as if you lack control over what you eat?
    • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
    • Do you binge on food more than once per week?
    • Even if you know a food doesn’t agree with you, do you eat it anyway?
    • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
    • When you eat one of your favourite foods, does it generally improve your mood?

    If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

    When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

    Trip to Hyderabad Cont….

    Well there are scheduling issues so will go to get my ticket & visa on thursday. Everything else is back on schedule. Trying to contact some of my friends who are in India so that we may be able to meet over there.

    I have been doing this job since 2002 and travelling overseas since then; however this trip will be my first time on a budget airline. Dont know what to expect? When I got my online booking it said Meal – To be purchased. some how flying and buying your food did not sound OK to me. I am sure that what ever my first choice is it will be over by the time the airline staff get to me.

    Anyway need to finish up all the stuff for today to be able to watch the opening match between Sri Lanka & South frica (ICC Trophy)

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

    NYC INTERIOR DESIGN FIRMS STYLE

    NYC INTERIOR DESIGN FIRMS

    NYC Interior Design Firms Thomas Britt knows how to create a glamorous interior better than anyone, so when he promised to give “a sort of sense Adrian” an austere industrial building, he knew exactly what to do. Like Adrian, the legendary costume designer, knew glamorous is a quality difficult to achieve. To achieve this, Britt sought inspiration from its customers: a couple, both in the international financial world, and their adorable son.

    “My goal was to create a smart home NYC Interior Design Firms of the 21st century of a young international couple,” says Britt transform their building generic six-story ceiling in Tribeca in a family home. His plan, executed with Valentino associated Samsonadze was to create the illusion of architecture, where there was none, and stresses the unconventional combinations of colors, luxurious fabrics, mother of pearl and lacquered antiques and modern art (paired collect works of Indian and Pakistani artists, but also pieces of Americans, including Louise Nevelson and Sol LeWitt).

    Britt set a young voice in the lobby, the space on two floors, with steel stairs steep. “We needed to warm up to Hall and to make it more attractive,” says Britt, who has cleverly divided into individual zones (soft, floor to ceiling curtains dramatically tied back) in order to reduce its appearance. It has saturated the wall in red paint, then hang it on three “triumphantly scaled” diamond-glass mirrors your own design.

    You can also add a touch of light to the room. That no one can find a Louis XVI console painted lobby of a fossil old, put a couple of lamps ‘iceberg’ 1940 FRENCH plaster on it.

    A small back room in the rear portion of the first floor is equally joyous. Cozy the pupal stage, the room is dominated by a Diva like gold bed in an alcove and partially hidden by thick curtains turquoise. red pillows on the bed making it pop blue and gold. Small tables inlaid with mother of pearl to add an exotic touch. An Indian dhurries with blue, gold and red pulls together.

    As in many houses in the city, the main parts of the population are on the second floor. Britt treatment living room double height, is a huge expense. The palette is crisp set by the booty white curtains, 22 feet high huge red border. A high-level white towers of Murano glass chandelier in a white sofa, chairs and red carpet red and white barrel. “When you’re in this room, do not know what country you are,” said Britt NYC Interior Design Firms. “You can be anywhere. The decor is influenced by all the places I’ve been”.

    NYC INTERIOR DESIGN FIRMS
    NYC INTERIOR DESIGN FIRMS
    NYC INTERIOR DESIGN FIRMS

    MODERN SWEDISH BEDROOM DESIGNS GO SROP

    Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    modern swedish bedroom designs

    MODERN SWEDISH BEDROOM DESIGNS

    Tom Monaghan, founder of Dominos Pizza, and car collector had a lot of cars in his world

    The first Domino’s “Javelin” official delivery vehicle being delivered to Tom Monaghan in 1969.

    When Monaghan only had a few stores, he had red, white, and blue AMC Javelins for delivery cars.

    When he and his brother started out in pizza delivery, they had a beat up ’59 VW bug, and when his brother wanted out of the company/business/partnership… he got the car as a settlement

    His dad died when Tom was four, and his mom put the boys into foster homes that didn’t work out, then into a catholic nun orphanage. After 6 years she got her life together and thought she’d be able to care for her sons and found out, she wasn’t parent material, then committed the boys to juvie.

    In his teens, Monaghan had been a penniless car buff; then he joined the Marines, went into pizza after his discharge and dropping out of college, acquired a fleet of automobiles, including a handmade Bugatti Royale, the Type 41 1931 Bugatti Royale Berline De Voyage, and the Packard that conveyed F.D.R. to his second inauguration.

    Because he liked to fly, and get to meetings about franchisees faster, he bought a Gulfstream jet and a Sikorsky S-76 helicopter.

    He had at least 3 annual antique engine shows on Domino Farms, the event featured eighty-six exhibitors of steam and gas engines, related paraphernalia and other contraptions. Also featured were classic cars from the Domino’s Pizza collection, two steam launches including the Olde English ‘D’ owned by Domino’s and a steam powered boat called Steamer Telegraph, owned by the show’s chairman, Jim Monaghan.

     When his pizza franchises took off, he built a 244-car collection, bought the Detroit Tigers, and became the owner of the largest Frank Lloyd Wright collection in the world. He was worth 480 million.

    Eventually, he decided to sell everything. He got rid of his cars, yachts, planes, and baseball team, and in 1999, he sold Domino’s to Bain Capital.

    one of the cars in his collection was the Barris AMX 400

    another was a Model J Duesenberg he bought for a flat million

    http://www.hotrod.com/articles/ccrp-0705-amc-amx/
    http://mentalfloss.com/article/65604/11-facts-about-dominos-pizza-founder-tom-monaghan-30-minutes-or-less
    https://www.newyorker.com/magazine/2007/02/19/the-deliverer
    http://people.com/archive/tom-monaghan-vol-32-no-13/
    https://www.nytimes.com/1999/02/14/business/taking-the-gospel-to-the-rich.html
    https://www.hemmings.com/blog/2011/03/20/sia-flashback-million-dollar-duesy-harrahs-auctions-over-300-cars/
    https://www.farmcollector.com/steam-traction/dominos-farms-sponsors-third-annual-steam-engine-show

    Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

    I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

    After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

    I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
    To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

    Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

    [This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

    The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

    Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

    INCREDIBLE HOME DESIGN WITH NATURAL LIGHT

    This 94 square meter apartment has a privileged location on the corner of the building. Looking for an apartment in well appointed with three bedrooms, one next to the park, with open views to the outside and green space overlooking the street, while the kitchen opens onto the courtyard and peaceful atmosphere. In the middle is a spacious hall and in relation to this, a new bathroom. The general plan with large windows on three sides and bright colors fill the room with light. It is difficult to decide which of these rooms, we love the most.

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    WORKOUT ANYTIME on WFMY News 2

    WORKOUT ANYTIME on WFMY News 2

    The WFMY News team had WORKOUT ANYTIME Franchisee Jeff Cook on the show to talk about how to do explosive exercises in just a few minutes each day. Mary Anne Mills from WORKOUT ANYTIME was also on the show from WORKOUT ANYTIME and they went through 4 different exercises that can be done at home to burn calories fast. In the next segment Mary Anne and Jeff went through exercises that show moms how they can work out while being pregnant. Mary Anne goes through exercises that build up endurance for labor and how to keep off weight while some moms “eat for two”. They went through the different cardio machines that keep the baby safe and go through a donkey kick exercise. Lastly, the station mentions where the WORKOUT ANYTIME is located in Greensboro and how to get more information on personal training sessions.


    You can view the full segment here. 

    The Best Text for Teaching How to Write and Revise Leads

    My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

    I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

    And every time I see this, I become more determined to break them of this thinking.

    Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

    My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

    This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

    If your teacher has to die, August isn’t a bad time of year for it. 

    Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

    Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

    I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

    One or two hands went up.

    Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

    And here I’m asking my students to take a second pass at their writing.

    I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

    Here’s what my students noticed, compiled into an anchor chart:

    Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

    We’ll get this revising thing down eventually…

    What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

    What is the Best Way to Warm-Up?

    There is a lot of controversy and conflicting opinions on what you should do for a warm-up for exercise.   One of the reasons is that warm-ups should vary based on the activity you are preparing for and your level of fitness.
    As the name implies one of the key goals in warm-up is to literally raise the body temperature and gradually ramp up the cardiovascular system to be prepared for harder efforts.     The length of warm-up should be based on the intensity of the activity.     Low intensity activities like moderate pace walking really require no specific warm-up as you can simply ease into the activity itself as a warm-up.     For activities like competitive athletic events that involve high intensity effort the warm-up should be longer.
    In the same way, you have to consider your fitness level because a warm-up for a highly fit individual may be relatively high intensity exercise for a deconditioned person.
    For all warm-ups, a 1 – 5-minute period of escalating cardiovascular exercise that raises heart rate and body temperature is advisable.    For high intensity athletic events this should be extended until the athlete breaks a sweat without being fatigued.   
    This literal warm-up can be done on a cardiovascular exercise machine or via dynamic bodyweight exercises like squats, lunges, planks, push-ups, etc.    
    Once you raise body temperature you can include some dynamic stretching with an emphasis on movements that address key joints and muscles involved in the actual activity you are warming up for.   For example, for tennis warming up the shoulder joint and surrounding muscles is important while for cycling this is less relevant.
     A Proven Warm-up Protocol
    Warm-ups for sports participation have been researched and there is one in particular protocol that is proven to reduce injuries by improving muscle strength, balance, and coordination.    This protocol is called the FIFA 11+ Program and involves doing 15 exercises.    For a complete how to guide click here:  https://www.slideshare.net/PedMenCoach/fifa-11-warmup-to-prevent-injuries 

    Although this protocol was developed for soccer it can easily be modified to fit just about any competitive sport!

    Globesity continue…

    WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

    • They had an active lifestyle
    • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
    • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
    • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

    Warning signs from the present day

    Diet Start

    • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

    In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

    • In 2002 the National Audit Office in the UK revealed the following facts:

    58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

    In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

    In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

    The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

    • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

    Battlefield Play4Free – PlayTesting The AEK-971 Assault Rifle (One Full Round – Myanmar – Raw Gameplay [Unedited] Video)

    Battlefield Play4Free and The Daily Draw

    Just a quick primer for those that don’t know; Battlefield Play4Free is a Free-To-Play title, which means it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money. In this game, you do so by purchasing “Play4Free Funds” that you can then use in the in-game Store. There is also a nice feature offered where you can win ‘prizes’ (weapons, armor, clothing, etc) from a game called The Daily Draw at the main Battlefield Play4Free website. You can play once every day, choosing a card from a random draw of eight and the card you choose will be an item ‘underneath’.

    The items possible to win range from temporary one-day-use-only weapons and clothing, to seven-day-use ones, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future. The Daily Draw also gives a chance to win ‘Boosts’, where you can earn extra Credits [for instance], as seen in the screenshot below:

    The AEK-971 Assault Rifle

    I recently won the AEK-971 in The Daily Draw on my Assault class soldier and thought I’d try it out and see how it felt and quickly write a post about it [I call these ‘PlayTests’]. Now, I am not a gun expert or know a lot about the statistics of the guns, so I will mainly be discussing briefly here how the gun ‘feels’ and ‘plays’, especially compared to the default G3A4 Assault Rifle.

    The AEK-971 unlocks nice and early at Soldier Level 3, but the main reason for this seems to be that it isn’t supposed to be very different from the Default Assault Class Rifle. As you can see from the comparison above, which is the main Store/Inventory screen information for the weapons, the only real difference is the amount of damage it can do. It has the same accuracy rating as the G3A4, the same range, and the same amount of ammo in the mags. After winning it in The Daily Draw, I played a few rounds with AEK-971 and originally recorded a couple of full matches. Here is one full match, shared unedited for you [a ‘Raw Gameplay’ video], testing out the AEK-971:

    I was also testing out the Trial of CyberLink’s PowerDirector 12 for editing.
    A Review article about that application – with Tips – Coming Soon™!

    Despite not being listed as any more accurate than the G3, I felt more ‘capable’ with the AEK (as though I could ‘put up a fight’ a lot better), probably due to the increased damage. It feels a little more accurate too, even though it isn’t really supposed to be, according to the Store/Inventory info for the gun. So, I figured this is a great time to do some testing! [Yay, tests! lol]

    AEK-971 Accuracy Analysis

    I did some basic analysis on the recoil pattern of this rifle and it is indeed similar to the default assault rifle, but the AEK is ever-so-slightly more accurate, in my opinion. Here is an example of a test I did, a screenshot of the spread patterns, collecting the bullet markings, below:

    Coloured spray paint marking the AEK-971’s Bullet Spread, on average
    (Click to see Full Size)
    • The left side is the spread while ‘shooting from the hip’, not using the sights, just standing there holding down the trigger  [the spray painted arrow is red-coloured as in, ‘try not to do this at all if you can, unless in very close quarters combat’]
    • The right side is the spread while ‘zoomed in’, that is, using the sights on the gun (it would use a scope if there was one), still just standing there holding down the trigger  [the spray painted arrow is yellow-coloured as in, ‘try to avoid this’]
    • In the middle is the spread while zoomed in/using the sights, crouching down, still holding down the trigger though – but also now compensating for the recoil of the gun (attempting to contain the spread into a small area) – in this case, slowly pulling DOWN the mouse while firing since the recoil of this gun pulls the barrel UP  [the spray painted box is green-coloured as in, it is recommended to do this (even better if you can tap the trigger instead of holding it down)]

    As you can see, even though the rated accuracy for this gun is “Low”, you can get a pretty decent containment of the spread, by kneeling down, using the sights, and compensating for the recoil by moving the mouse accordingly [this little tip helps with all guns].

    In most games, you can try to compensate for the recoil of a gun by slowly moving the mouse in the opposing direction to where the barrel travels. For instance, if the recoil pulls the barrel of the gun left, when shooting, moving the mouse to the right then, will cancel out some of the recoil and make for a smaller spread of bullets and easier/faster repositioning for the next shot. Try to remember that each gun will be  different in it’s recoil and which direction you should compensate, when using each weapon though. 
    [Note that due to game programmers making bullets ‘miss’ (no matter what), in an attempt to imitate reality (which has imperfections in the gun and bullets, air changes, etc), it will never be possible to fully compensate/correct for the ‘spread’ of bullets in a gun (this goes for most games)]. 



    In my tests, the Assault Default G3A4 seemed to pull up and away to the left slightly, when shooting it. Holding down the trigger longer, the gun climbs way up into the sky easily (hence the “Low” Accuracy rating, I assume). For the AEK-971, it does still pull up, but it does not pull to the left in the same way as the G3A4, especially when using the sights. It sort of does a light ‘stepping’ to the left and then to the right, somewhat randomly [whatever the algorithm is in the programming]. This, to me, makes it ever-so-slightly more accurate in the ‘feel’ of the gun, because while it still ‘goes all over the place’ when shooting, it sort of compensates for itself just a bit, and the end result is more of a direct climb up in the recoil, something that felt, to me, easier to compensate for than with the Assault default G3. (I assume this very slight change in the spread/recoil is not enough to win this gun a “Medium” rating in Accuracy, but it is enough to make you have to Level to 3 in order to be able to purchase it..).

    Close-To-Medium Range Kill with the AEK-971 in Myanmar. Even with the ‘side-stepping’ that the gun does (and the enemy strafed around as he ran out towards me from behind the rock in the center of the screen) I still got the kill, mostly due to the Very High Damage Rating of the weapon
    (Click to see Full Size)

    In Conclusion

    Overall, the AEK-971 was similar to the default Assault class rifle, the G3A4, when playing. To me, it did feel slightly more accurate, but not by much. If you are having a really hard time hitting people with the G3A4, your accuracy won’t increase very much at all if you purchased this rifle. However, if you are getting used to the default Assault gun, this one packs a lot more punch, and you’ll be getting more kills overall if you upgrade to it. Because I recently won this gun Permanently [during the course of compiling this article, yes it does happen in The Daily Draw! woot] I can’t see the current price for this rifle anymore, to purchase it from the in-game Store; but last time checking, it was only 300 Credits to try it out for one full day. It was also listed as [what I call] ‘Earnable’ because, if you can rack up 45,000 Credits, you won’t have to pay for upgrading to this rifle with any Real Money at all (you can just use the Credits). If you did buy some Play4Free Funds and have 1,250 to spare, you can purchase it at anytime (not having to wait until Soldier Level 3), permanently. So in closing, PlayTesting the AEK-971, I found it slightly better than the Default Assault Class Rifle, even if it only ‘felt’ that way due to the higher damage it does.

    Long Range Kill with the AEK-971 in Myanmar. The thin iron sights of the gun (default sights) help a lot with targeting farther away. With the Very High Damage Rating – even though the gun has a Low Accuracy Rating – single-shot/tap shooting can still make it lethal at range, when needed
    (Click to see Full Size)

    Have fun trying it out for yourself sometime and See You In The Games!

    Gameplay Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

    INTERIOR DESIGN IN BANKE HOTEL

    BANKE HOTEL

    BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

    BANKE HOTEL DESIGNBANKE HOTEL DESIGN

    The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

    Reminder: Diablo II – 2014 Ladder Reset is May 27th

    That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
    So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
    (at least until the botters get going)
    See You In The Games!

    My Trip to Male, Maldives, September 2010

    The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

    View of Water Villas.

    View of Maldives by Air (Sea Plane)

    Not only did I snorkel but I also went on the “Whale Submarine”

    As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

    I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

    Easy or Hard to Digest

    The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

    Diet Start

    These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

    Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

    Dietary Fiber

    Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

    Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

    My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

    This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

    Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.

    Let me give a classic example. As mentioned earlier I went to Malaysia and Singapore during the monsoon season and I made an observation. In KL when it rains; like in Sri Lanka the people stopped what ever they were doing and took shelter from the rain. Those who even had umbrellas took shelter as it appear they did not want to get there footwear wet.

    However, in Singapore it was very different. I happened to be out one day early morning (going for a walk) when it started to rain. I was walking pasta a primary school and this is what I saw. A teacher was leading a group of very small children (6-7 years) who were clad in rain gear and they walked in a line and came out of the premises and they walked to the MTR station and got in to the train. Undoubtedly they were going on some sort of educational trip. What does this mean: In my opinion the Singaporeans are teaching their children to face obstacles and overcome / work around / find solutions to them. This is the essence of the psyche of an industrialized nation as opposed to an agrarian nation which generally accepts the affects of the elements as “gods will” or “karma”.

    So even the very small children are trained to deal with a simple thing as the rain and have an attitude of using the right equipment to allow them to go about their daily business. So in adult life they do go and conquer the world economically.

    I can certainly say that in Sri Lanka the vast majority of people have this agrarian psyche. Based on my observations it seems that quite a number of people in Malaysia still do too. So the challenge for those of us who have the privilege of influencing people is to; in some way contribute towards instilling the right attitude rather than anything else. I can say from my experience as a consultant and a trainer I derive more satisfaction in seeing this than my clients make huge profits. I say this because these individuals with the right attitude have the potential to influence / be a role model for the masses in these underdeveloped countries.

    Astaxanthin – Anti-Oxidant Superstar

    While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

    There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

    Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

    Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

    Reduction of Inflammation
    Protects Vision
    Enhances Heart Health
    Decreases Oxidative Stress
    Protects Against Sunburn
    Boost Your Immune System
    Helps Prevent and Fight Cancer

    Astaxanthin and Eye Health

    Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
    Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

    Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
    Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

    Age-Related Macular Degeneration
    Diabetic Neuropathy
    Cystoid Macular Edema
    Central Retinal Arterial and Venous Occlusion
    Glaucoma
    Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

    Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

    Trip to Hyderabad Cont

    The day of leisurely travel to Hyderabad turned in to an interesting experience for me. Here’s how it went.

    There were of course no issues in getting to the Airport or getting checked in. At the checking counter I asked the Jet Airways staff if there were any restrictions of taking a bottle of liquor to India. At which point I was told “NO SIR”. When I checked in however they were unable to check my baggage through to Hyderabad since I was changing from International to Domestic (Still Jet Airways) I was told that I need to put my bag through customs at Chennai.

    Things went smoothly from there; got through Immigration, went and bought 500ML bottle of Black Label, went through security, boarded and arrived in Chennai on time. Jet airways must be congratulated for on time flights between Colombo and Chennai. Their service too was quite good.

    Things turned in to a big process when I got to Chennai. First I had to go through Immigration, it was smooth, then through Customs, also no issue, then physically had to come out of the International Terminal and go in to the Domestic Terminal. I was told that Jet Airways staff would be there to guide the transfer passengers, however there were no staff and there were no sings to direct. I asked for instructions and got to the Jet Airways counter without any trouble. Yes I did change some money as well. At which point I was told that I need to put my luggage through the security scanner again so had to Drag my bag to the end of the terminal and re-put the bag through the security scanner (X-Ray) then had to come back and join the line to check the bag in for a second time. Luckily there weren’t many passengers in line. While I was doing this I was also carrying the Duty Free Bag with the bottle of liquor inside it and in plain sight of the Jet Airways staff.

    So I checked in the bag and went to the Taj Restaurant to quench my thirst; well things really went wrong there, apparently for some Gandhi commemoration the bar was closed. I thought I was back in Sri Lanka where for any frivolous thing they close all the bars. Never mind survived on a cool fresh lime soda.

    When it was time for me to go through the security to board the domestic flight I had to put all my hand luggage again through the security… nothing new I guess. Then came the surprise they said “Sir you cant take wine in the plane, you have to put it into the main luggage” I promptly pointed out to the security guy that I am connecting from a International flight and that I did bring the bottle on board as hand luggage and I was told that it was allowed by the airline staff the time of boarding. “No sir it is not allowed in domestic flights” came the answer right back at me. Knowing not to argue with them went back to the counter. Then the fun started….. apparently the process was that they had to get my checked in luggage out of the cargo container put the bottle back in to the check in luggage then re scan the luggage through the X-Ray machine and so on. No drink can be worth all that trouble. They also agreed with me that the bottle might break in the luggage and I will have to wear a whiskey perfume during my stay in India.

    So I was on the verge of throwing the bottle down the drain when one of the assistants who help with the luggage suggested to the girl at the counter to check the bottle in as a separate piece of luggage. That was funny; I had a grin in my face because it sounded ridiculous. But guess what, he got a small box put the bottle in, taped it up, put fragile stickers on it, and got the girl to weigh it. Guess what, the scale returned a value of zero kilograms. I thought now they are going to make a fuss again, but to my surprise no they checked in a weight of 2 KG the minimum weight of a check in luggage (Good to know I thought) and gave me a baggage tag. So I thought this is all going to be a waste as the bottle is surly going to break. So deciding to ignore a package with a streak of whiskey behind it at the Hyderabad Airport baggage belt went through the security and got in to the boarding area.

    Then came the next surprise, the flight was delayed for two and a half hours. Man now I know why they don’t allow liquor in the domestic flights as they are apparently always delayed and they don’t want disgruntled customers having a few to get over their frustrations of having to wait for an eternity. Well that is the consensus of the few guys I got chatting to.

    Finally the plan did arrive and I made it to Hyderabad. Went to collect the luggage and to my surprise the small box did make it intact. When I saw that it brought a grin to my face so get to the hotel and yes had a drink and went to sleep. So now from tomorrow morning I will be busy with the assignment. Looking forward to it.

    Taking pills and supplements

    Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

    Over-the-counter (OTC) diet pills

    The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

    Diet Start

    Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

    Supplements

    To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

    Key supplements

    Magnesium

    A fundamentally important mineral that counters insulin resistance.

    It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

    Quercetin

    A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

    Omega-3 fats

    If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

    Chromium

    A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

    Lcarnitine

    Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

    DIETARY MYTH

    Myth: I will get quicker results if I use diet pills.

    Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

    ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

    Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

    http://tywkiwdbi.blogspot.com/

    Solving the Weight Loss Puzzle Part 1

    Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
    Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
    Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
    Eating a low fat diet is the key to losing weight
    Eating a low carbohydrate diet is the key to losing weight
    Most obese people have a slow metabolism
    Obesity is a genetic disorder
    Some people have a slow metabolism and some people have a fast metabolism
    Exercise is not really effective for weight loss
    You can eat all you want and lose weight if you do not eat carbohydrates
    Low carbohydrate diets are unhealthy
    If you eat foods in the right combinations you will lose weight
    The key to weight loss is eating healthy not counting calories
    Americans are eating more fat than ever before
    Americans are eating less fat than ever before

    Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

    Men’s Body Click Diet part 1

    In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

    Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

    Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

    Diet Start

    The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

    The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

    Prostate Ailments: The ‘Male Problem

    There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

    The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

    What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

    Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

    Diet and Prostate Health

    If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

    But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

    Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

    My Trip to Bangladesh June 2011

    The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
    The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
    The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

    Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

    I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

    The “Fatal Graphics Error” message, when starting MTW2

    I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

    Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

    Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
    is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
    Click image to see Full Size

    After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
    Hopefully that works for you all, as it did for me.

    See You In The Games!

    Chronic Illnesses and Diet part 2

    Chronic Inflammatory Illness and Insulin Resistance

    Allowing for the fact that genetics affects an individual’s susceptibility to disease, the roots of chronic illness often lie in deficiencies of various nutrients, other dietary issues and hypersensitivity to foods and environmental factors, such as toxins. Whichever of these factors apply to you or your family, insulin resistance may be the easiest to recognize and correct. When you have this condition high levels of insulin, created by frequent intake of carbohydrates, spill over into biochemical injury that makes whatever you have worse. This can include asthma, eczema, colitis, depression, headaches, psoriasis and much more.

    What is common to all of these problems is inflammation. Whether you’re looking under the microscope or studying its basic chemical reactions, inflammation is the same, wherever it’s found. Chronic cough and mucus; sore, swollen, stiff joints; cramps and diarrhea; a chronically red, itchy rash; or periodontal disease — all are inflammation. Even cardiovascular disease, which used to be called hardening of the arteries and is now called atherosclerosis, is recognized as a fundamentally inflammatory process.

    Diet Start

    The first step in the biochemistry of inflammation is the release of informational substances from injured cells that attract the attention of healing mechanisms, the way a phone call to the automobile club brings you roadside assistance. The aid mobilized by these cellular calls for repair work is usually limited to the immediate task at hand; it’s designed for mending a cut or recovering from a burn or fighting infection. But if the agent causing the inflammation persists or if something goes wrong with the signaling mechanisms involved in the call for help, the repair work and its accompanying signals (pain, swelling, redness and heat) may become stuck, leaving you with a chronic inflammation. Chronic inflammatory diseases are often described by medical terms that end in Itis’ and ‘,psis’.

    Because the signaling mechanisms involved in chronic inflammation may be distorted by inappropriately high insulin levels in your body, this is something over which you have control. Controlling insulin levels through appropriate dietary changes, including reducing carbohydrate consumption or shifting most consumption of carbohydrates to the later part of the day, will result in a positive effect on the biochemistry of inflammation. Although this dietary change is not directed at a specific disease, it should be part of any comprehensive treatment since it is aimed at easing the predictably disordered chemistry of anyone with a chronic inflammatory illness.

    Medications that simply squelch the inflammation may not always be the best course of treatment. Granted, there are instances in which the cause is long gone but the body has gotten stuck in some kind of inappropriate reaction. In these cases, subduing the symptoms temporarily may work. But it’s different when it comes to the daily, long-term application of steroid creams or the consumption of systemic steroids or anti-inflammatory drugs. These treatments have some fairly dreadful gastrointestinal side effects, including the tendency to create leaks in the intestinal walls that allow the entry of unwanted toxins, chemicals and allergens into the bloodstream.

    The Body Clock Prescription for Treating Chronic Illness

    Chronic illness makes you listen to your body. The message is not so precise that you know exactly what to change, unless of course it’s something like chronic cough in a smoker. Most of the time, chronic pain or other signs of inflammation don’t announce their cause. They demand that you do some detective work, presumably with the help of a professional who has good instincts and expertise at reading your body’s communications by carefully listening to your story, interpreting laboratory tests and then making educated efforts at trial and error.

    Anyone with a chronic illness has to be especially aware of the second Tacks Law: if you are sitting on two tacks, removing only one does not necessarily make you feel 50 per cent better. This means that insulin resistance is just one of many manageable factors that may also include improving other aspects of nutritional status and looking for the trigger, irritant, allergen, toxin or germ to which your body may be responding.

    Doing the detective work required to find underlying triggers of a chronic illness may take a long time; nor is it always successful. As a more generalized strategy, the ten steps of the Body Clock Prescription will not only prevent or tame insulin resistance, a major contributor to chronic illness, but will reinforce healthy body rhythms and foster rhythmic integration. Remember that flexibility is your body’s treasure; it enables you to be more like an orchestra, with its constant active effort to stay in tune and on beat, than a mechanical system. The same flexibility that allows you to fall victim to the negative effects of poorly timed eating, breathing, exercise or exposure to light also permits you to use such influences for your benefit.

    Original Mexican Mazel Mex

    • 2.5 cups cold water
    • 1.25 cups cornmeal
    • Generous dash cayenne pepper and/or cinnamon
    • 2-3 Tbs. corn oil
    • 3 onions, peeled and coarsely chopped
    • 8 large tomatoes, coarsely chopped
    • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
    • 1-2 cloves garlic, peeled and minced
    • Diet Start
    • 1 Tbs. fresh cilantro, chopped and torn into leaves
    • 1 Tbs. fresh parsley, chopped

    Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

    Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

    YIELD: 2 servings.

    Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

    Hazel Enchiladas

    • 6-8 corn tortillas
    • 0.25 cup corn oil
    • 2 recipes Mazel Cheese Mexican
    • 1 recipe cooked Salsa Mazel
    • 1 recipe fresh Salsa Mazel

    Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

    VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

    VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

    VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

    YIELD: 2 servings.

    Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

    Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

    Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
    Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

    Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

    Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

    This video compilation is a test of a few things:
    1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
    2) Capture quality of MSI Afterburner and performance/lag of using it
    3) H.264/AVC compression quality maintainability
    4) Youtube’s quality maintainability

    Recorded with:
    MSI Afterburner
    – v.2.3.0
    – MJPEG codec, “Full Frame”, 80% quality, 30fps
    – Audio automatically records into PCM (“Uncompressed”) format

    Recorded Game: 
    Hitman: Absolution @ 1920×1080 (1080p)
    – “Ultra” settings (Preset)
    – Anisotropic Filtering set to 4xAA
    – “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

    – “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
    – “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

    Framerate while not recording: ~31-79fps
    Framerate while recording: ~28-64fps

    I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
    I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
    In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

    A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

    The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
    In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
    Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

    ²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
    Click to see Full size

    [A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

    For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



    It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
    The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

    *As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

    ¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

    If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
    [With the RTV1 codec, it appears that it will still remain a little, no matter what…]


    Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

    Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
    MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
    Click to see Full Size

    The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
    The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
    This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

    Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

    What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

     The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

    **Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

    This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

    Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

    Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

    Overall, well done MSI.  /clap

    If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

    Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

    Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




    [Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

    ROUTINE FOR PUTTING ON WEIGHT

    Plenty of rest and exercise, a good diet of fattening foods and no worries—those are the essentials

    PUTTING on weight is very much more difficult than taking it off. Even thosefew extra pounds which can make all the difference to the appearance, comfort and, no doubt, general health, can be quite a problem.

    Before embarking on a diet, it is always advisable to seek the advice of your own doctor. This is particularly important if there has been a sudden or prolonged loss of weight for no good reason and without affecting normal appetite. Where loss of weight is the result of an illness or operation, it is usually quite quickly and easily regained after recovery. The routine to be described will help in such cases, subject to the approval of your own doctor.

    We are concerned here chiefly with that large army of men and women who are anxious to put on weight but who are the thin type by nature. Such people are born worriers, with excitable and energetic natures and over-active bowels, whose food does not remain in the intestines long enough to be properly absorbed.

    Diet Start

    Essential in the fattening process are:

    • Keep calm and stop worrying. That is obviously a counsel of perfection to those who easily get worked up, but it can be achieved by cultivating outside interests that take your mind away from the source of anxiety (it may be professional, domestic, financial, or all three).
    • Take plenty of rest. A minimum of between 8 and 9 hours in bed at night, plus between 10 and 30 minutes after every meal.
    • Avoid rushing about, but take regular exercise. On no account jump up immediately after a meal; take life at a leisurely pace. Strenuous games are good if you really enjoy them, because they create appetite; so does any form of outdoor exercise, however mild.
    • Eat well and regularly, and concentrate on the fattening foods (list follows). But be careful not to stuff between meals or you will defeat the whole object and be unable to eat your main meals, which are far more important. You must also avoid over-eating, with the inevitable danger of indigestion and biliousness. Aim at three good meals a day, plus any extras (such as sweets, etc.) which you really fancy and a hot, preferably milk, drink last thing at night. The housewife should take as many meals out as she conveniently can because she will not have the worry of preparing them.
    • Cut down your smoking. It diminishes the appetitite, so, if you must smoke at all, only after meals, please.

    Sugar, sweets, jam, marmalade, fruits in syrup, treacle, honey, Golden Syrup.

    Cakes, scones, pastry, cereals, bread, biscuits, puddings.

    Thickened soups and gravies, sauces made from flour, butter and/or milk.

    Fried foods, cream, salad dressings, butter, dripping.

    Pork, duck, goose. All fat meat and bacon. Tinned fish in oil.

    Sweet wines, beer, stout, spirits, sweet aerated waters.

    Dried fruits. Bananas, grapes, plums. Potatoes, peas, dried beans, parsnips, beetroot.

    Cod-liver oil, Virol, olive oil.

    Salt with food.

    Foods with very little fattening value

    Meat extracts. Marmite. Clear soups. Gelatine. Egg-white.

    Green vegetables and salads. Vinegar. Tea. Coffee.

    SPECIMEN DIET FOR PUTTING ON WEIGHT

    Minimum: 1 pint of milk per day

    On waking: Cup of tea, preferably with milk and sugar.

    Breakfast: Cereal or porridge with milk and sugar or honey or syrup.

    Bacon, egg, fish, etc.

    Toast, butter and marmalade.

    Coffee or tea.

    11 a.m.: Coffee, cocoa or milk and a biscuit, or try this cocktail: One teaspoonful Spanish olive oil sandwiched between layers of orange juice in a wineglass. You can increase the quantity of olive oil gradually.

    Lunch: Thick soup, if liked (if this makes it impossible to eat main course, substitute tomato or orange juice as an appetiser instead).

    Meat, fish, game, poultry, etc.—both fat and lean. Serve with gravy, roast or fried potatoes and a green vegetable or salad with plenty of oily or cream dressing.

    Pudding and / or cheese, butter and biscuits.. Coffee.

    Tea: Tea with cake or bread and butter or banana sandwich.

    Dinner: Thick soup (see Lunch).

    Fish, meat or poultry, with gravy, at least one vegetable from list of Fattening Foods; one green vegetable or salad with cream or oil dressing.

    Steamed or boiled pudding or milk pudding or ice cream.

    Cheese with bread or biscuits and butter.

    Coffee.

    NOTE: Cocktails, wines. etc., may be taken as desired and obtainable. Stout or beer is good.

    Bedtime: A hot drink, preferably containing milk.

    The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

    Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
    Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
    Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
    However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
    The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
    Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
    When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
    How Shoes May be Impacting Your Health
    Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
    Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
    The Health Benefits of Grounding
    Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
    Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
    Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
    All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
    So have some fun, kick your shoes off and get back to nature!
    How to get the benefits of Grounding
    Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
    For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

    WORKOUT ANYTIME in Buffalo Grove Patch

    WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

    24/7 Gym Opens in Buffalo Grove
    By: Cristel Mohrman

    Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

    The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

    Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

    “We really like this location a lot,” co-owner Eric Nagel said.

    (Read More)

    Cut your Protein why no Sugar?

    The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

    One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

    Diet Start

    Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

    Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

    A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

    But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

    Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

    Integrating Peer Feedback

    Sometimes my students surprise me.

    We’re studying the Measurement and Data standards right now in math, and we were struggling a bit with 4.MD.2 – the measurement word problems standard. We’ve been using some of the free math units from Engage NY (a resource I highly recommend), and we were on day 3 of working through word problems, and I knew I had to mix it up a bit. Here’s what we did.

    First, students worked through 6 word problems from module 2. The word problems were multi-step and used many different types of metric measurement. They completed these problems independently, but they could consult other students if they got stuck. Once everyone at the table finished, they checked their work with each other to make sure they agreed on the same answer.

    Next, I assigned each table a different focus problem from the 6 that they solved. They had about 10-15 minutes to work together to design a poster that explained the problem and solution. They could represent their work any way they wanted, but the work had to speak for itself — they wouldn’t be there to explain the poster to anyone else.

    Once the posters were completed, I gathered the students together on the carpet, and we reviewed the Standards for Mathematical Practice using these posters I’ve made:

    We talked about using these standards as opportunities to give feedback. We also discussed how effective feedback needs to be specific and constructive. If you like something, say what, specifically, you liked and how it helped communicate an idea. If something needed to be improved, explain what and how that could be done.

    Once I felt like the students had some ideas for ways to give good feedback, I had the students do a gallery walk around the classroom to look at the other posters. In a gallery walk, students use sticky notes to comment on other people’s work. They can leave positive and/or constructive feedback. I let the students comment anonymously if they wanted, and they were able to reference the SMP posters if they needed ideas (I gave them access to a digital copy on their iPads). I used a timer, and they spent 5 minutes studying and commenting on each poster before rotating.

    Once they’d rotated through all of the posters, the returned to the poster their group had made, and they took a few minutes to read the feedback. I had them work together to sort the feedback into the categories “helpful” and “not helpful.”

    We shared a few examples of helpful comments with the whole class:

    • “I like how the team drew pictures to represent the problem, but I think the team could have explained what each picture represented from the problem.”
    • “The pictures aren’t in proportion to one another. The drawing of 1,500 mL is much larger than 3 L, but really the 3 L should be larger.”
    • “Something I really like about your poster is that it has pictures to represent the problems. One thing that you could have done differently is represent the subtraction and addition with a tape diagram.”
    • “You could have represented the answer in mixed units to make your answer clearer.”

    We then talked about unhelpful comments — one word comments or feedback that focused more on style than substance.

    Overall, this lesson was very helpful in getting the students to think about the Standards for Mathematical Practice and how to give effective feedback. Each group had ideas for things they wanted to change on their posters based on peer comments, and some groups even asked to work on it more during recess! It was also a good reminder for me that students can give each other powerful feedback, and I need to provide them with more opportunities to do this across the subject areas.

    If you’d like to get a copy of my student-friendly Standards for Mathematical Practice posters, they’re available in my TpT store by clicking the image below.

    What are some ways you incorporate peer feedback in your classroom? I’d love to hear more ideas in the comments section!

    How Much Protein Do You Need Each Day?

    One of the most controversial and confusing aspects of nutrition is how much protein people should consume each day.    There are several factors to take into account to get a good answer to this question, and there are potential problems with eating too much protein.   There are also definitely problems with not eating enough protein.  It is also important to consider what type of protein is being consumed.
    Height, weight, age, sex and activity level all factor into your protein needs.   Obviously the larger you are the more protein you need to take in to support structural proteins throughout the tissues of the body including the muscles, bone, skin and organs.  In the same way the more active you are the more protein you need to consume.  In addition, protein is used to create enzymes, and enzymes are critically important for all cellular function.
    Protein is made up of amino acids and there are essential and non-essential amino acids.    Essential amino acids MUST be consumed because they cannot be made by the body.    Complete proteins contain all the amino acids and come from meats, poultry, fish, eggs and dairy.   While vegetarian proteins are not complete it is not hard to combine different plant protein sources to obtain all the protein the body needs to function.
    Other factors which influence how much protein is required is overall caloric/energy status.     If you are eating enough calories to maintain bodyweight or gain bodyweight you require less protein as a percentage of overall calorie intake while those people in caloric deficit require a higher percentage of their overall calorie intake to maintain lean tissue mass (losing lean mass like muscle is usually NOT a good idea so this is important).
    How much is too much?

    In large amounts and for certain populations (such as those with compromised Kidney Function) excess protein can cause problems.    That being said, for the normal healthy individual, the body can easily and safely process and use a lot of protein.    A portion of the protein you eat is frequently converted to glucose (blood sugar) and if your overall calorie intake is too high you will convert excess protein into fat like ALL unused excess calories.
    Another potential problem with too much protein is that high protein intake stimulates the release of mTOR which stands for Mammalian Target of Rapamycin.    mTOR is a key regulatory protein that signals for cell growth through the creation of new proteins. Consider protein building similar to a race car. The larger the engine, the greater potential for speed. Similarly, the more mTOR present in any given cell, the greater potential for more protein construction. And just like the gas pedal fuels the engine, mTOR is a signaling protein, and can be various levels of active (like a pedal’s ability to regulate speed). If a number of different processes all signal for ‘Go’, then the cell builds as much protein as it can, as quickly as it can. So just as a souped-up car takes off rapidly, a muscle cell can signal for tremendous muscle growth very quickly, given the right conditions.   n
    For this reason, mTOR is a good thing when you are looking for muscle-building!  However, there is a potential dark-side to mTOR.   Cancerous tumors are designed to grow as fast as possible, and they rely on mTOR signaling to build proteins just like healthy cells.   So too much mTOR could theoretically put people at a higher risk of developing rapid and serious cancers.  In fact, a lot of cancer research is based around slowing down and minimizing mTOR activity in tumor cells (the exact opposite goal of muscle research).
     
    This doesn’t necessarily mean that eating more protein for muscle building is going to cause cancer. Numerous other proteins and factors come into play, and some may respond differently in muscle cells than in cancerous cells.
    Safe and Adequate Protein Intake

    The Institute of Medicine’s protein RDAs are calculated using 0.8 grams of protein per kilogram of body weight. This means an adult who weighs 68 kilograms needs at least 54 grams of protein each day. The RDA for pregnant and nursing women is 71 grams of protein per day.  Keep in mind the RDA is a MINIMUM and does not mean this is ideal!   This also assumes you are sedentary!   So, if you are exercising and trying to build muscle or older and trying to prevent muscle loss higher protein intake is better.  To determine your minimum daily intake, divide your body weight by 2.2 to determine your weight in Kilograms and then multiply by .8 to get your minimum daily protein intake.  
    The Academy of Nutrition and Dietetics states that although athletes only need about 1 gram of protein per kilogram of bodyweight to maintain muscle mass, they require 1.4 to 1.8 grams of protein per kilogram to build muscle mass; this is equivalent to about 0.64 to 0.82 grams of protein per pound of body weight each day.

    Paperless Mission #12: Collecting Student Work

    This is the twelfth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #12: Collecting Student Work

    Recently, I shared how I distribute student assignments through Dropbox. Today I’m going to share how students turn in those assignments. To do that, I primarily use Edmodo.

    Once you’ve created an assignment in Edmodo, students will be able to see it as they log-in.

    If it’s just a text-based assignment, they can type the text in the comment section and submit it.

    Often, however, my assignments tend to require them to include an attachment of some sort. These can fall into a couple different categories.

    Photos & Movies

    The Edmodo app allows you to load photos directly from your camera roll as an attachment. Just select “Attach: File.”

    Documents produced in other apps (e.g., Pages, Keynote, etc.)

    This process has a couple extra steps, but it’s still easy to accomplish. First, students will need to load the item into their backpack. This is normally accomplished through the “Share and Print” option in the original app. For example, in Pages, you have the option to “Open in Another App.”

    This will result in the file being added to the student’s Edmodo “backpack.” Once it’s there, students can attach it to an assignment by choosing “Attach: Backpack.”

    Once the items are selected, students get to rate the assignment using the emoticons and click “Turn In Assignment.”

    From my perspective, it’s a dream. I don’t have to worry about receiving “No Name” papers, and I can quickly grade and comment on student work that’s turned in.

    Apprentice Guides

    One of my back to school projects is to make step-by-step tutorials to help students (and teachers) with some of these iPad tasks. The first one is on Turning In Assignments from Pages to Edmodo and you can download a copy of it here.

    I apologize that the image quality isn’t perfect — it lost something when I uploaded it to Google Drive for sharing, but it’s still very functional. (I’ll share higher-quality imaged versions later when I get more completed.)

    What programs do you use to collect student work electronically in your classroom? I’d love to hear in the comments section.

    My trip to Wadduwa

    I just returned home after a 3 day South Asian Regional Workshop on Resource Mobilization. It was a good workshop as it took RM strategies to the next level and looked at operationalizing them. As Strategic Planning / Organization Development consultants we often highlight the strategy for resource mobilization; be it venture capital, angel fund or gearing in the private sector to institutional fund raising and linking with CSR in the development sector.

    What was most interesting was the cases we went through, and going through a logical process which led to ones resource mobilization strategy. The workshop was facilitated by a retired general from the Indian army and he was a good facilitator who kept the attention of a group of 50 people for 3 days. It is important that we as consultants keep up with new trends as well as take time out to reflect on our ability to continually add value to our clients by increasing our body of knowledge.

    We also learned of new ideas and trends in the field of resource mobilization and were very useful given the current global economic situation. Looking forward to taking the learning’s to my clients in the near future.

    I also got a very small project in the financial services industry while I was at the workshop. It is from an old client who has the habit of not giving me too much lead time for projects: there goes my week end. So I am going straight to facilitating a strategy workshop in the financial industry over the weekend.

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

    You can view the full article here. 

    1960 Lincoln Continental mk 5 Formal Limousine

    in the above photo, lower left side, you can see the air conditioning vent under the grab bar

    and this cool control panel / radio for the passengers in the back seat to control the partition, radio, and air conditioning level

    and the AC takes up about a 1/3rd of the trunk space

    Food Repair Guide: Baking Part 2

    Swiss roll

    If you are making a Swiss roll, then line the tin with greaseproof paper, but do ensure that you grease the paper well before pouring in the mixture. Try also to ensure that the oven shelf is level or all the mixture will run to one side. If it does, all is not lost, although it will be rather difficult to roll. When you turn the Swiss roll out, do so onto a tea cloth or piece of greaseproof paper that has been coated well with icing sugar. If not well sugared, the Swiss roll will stick to the cloth or paper and you will have a terrible time rolling it. If you have not greased the paper properly, you will also have a terrible time peeling it off, but patience will usually win the day. Do not worry if the roll is not entirely perfect. As long as you can keep about one third of it intact, that will do for theoutside and no one will see the inside. Dredge it thoroughly with sugar or icing sugar. Or, if it has really fallen apart, pre-slice it before serving so that no one can see.

    Failed sponge cake

    If, despite your best endeavours, your sponge cake, be it light or rich, is dry, crumbly, flat, lumpy or generally unappealing, do not throw it out. If you are desperate for a complete cake or dessert, cut the sponge into very thin layers, sprinkle each with a little liqueur if for a dessert, and layer very generously with filling so that the cake gets smothered. Then top or ice equally generously and no one will ever know. If you do not need the cake too urgently, keep it to make trifles, tipsy cakes or anything that needs a sponge base. Buried deep enough and soaked comprehensively enough, even the most revolting cake will become quite palatable. Alternatively, crumble it and use it as a topping. When toasted, the crumbs can be used as decoration for almost anything in need of disguise.

    Diet Start

    This does not apply only to plain sponges. Orange or lemon sponges would be a delicious base for any cream dessert, chocolate, coffee or even gingerbread can be used as a base for ‘a trifle with a difference’. Indeed, coffee and chocolate cake could be sliced into fingers, thoroughly dried out in the oven and sandwiched together with some butter icing as biscuits. Any of the above could be used as the base for a baked pudding, but remember that the cake will be sweeter than bread or rice so reduce the amount of sugar.

    Failed fruit cakes

    Failed fruit cakes are just as adaptable.

    Rich fruit cakes often get old and dry out. Do not abandon them to the birds. Cut deep slits in the top of the cake and feed with a mixture of brandy and sherry, or, if you do not want to be too alcoholic, a fruit wine or good fruit cordial. The amount you give the cake will depend on how dry it is, but you can always cut it in half and test the middle.

    The same principle can be applied to lighter fruit cakes although one needs to be more temperate. A large quantity of fruit will soak up the liquid and make the whole mixture moist but sponge will merely become soggy, so the greater the proportion of sponge to fruit the less liquid it should be given. It is usually better to ice the cake after it has been — to conceal the tell tale signs.

    If a rich fruit cake really is dry beyond redemption, break it up in a bowl, add some suet and a goodly measure of liquor, leave it to soak for 24 hours, then squash it well into a bowl and steam it as a Christmas pudding. It will be a little crumbly and somewhat lighter than the standard, but many people prefer it that way!

    Icings

    The disaster-prone cook should steer clear of all but glace, butter and royalicing — fondants and their kind are for those with time and expertise to spare.

    Glace icing

    Glace icing is quick and simple but messy. It is not easy to get the proportion of icing sugar to liquid right to achieve `spreadability’ without `runability’.

    Always put whatever you are going to ice on a rack so that the extra can run off without getting stuck in a thick frill round the bottom of the cake. Arm yourself with a pot of boiling water and several metal spatulas or flat knives to smooth out the lumps. Inevitably, the wretched stuff will never quite cover the top of the cake in the first run, and when you add the next bit, the first will have dried and the whole thing will go lumpy. Only practice is going to perfect your technique, but smoothing with a spatula dipped in boiling water does help.

    Always be ready to decorate or disguise the top with something other than icing — even if only gold and silver balls. Grated chocolate is a good alternative.

    Marbling

    Marbling the top, if it is reasonable, will distract the eye from any minor blemishes and is easy and impressive in itself. Run a little melted chocolate, or different coloured icing, in parallel lines across the top of the cake. Then, before it is dried, take a knife point and pull it across the cake top in straight lines at right angles to the first lines, thus pulling the lines into a feathered shape. Try it a couple of times on greaseproof paper before you launch into the cake.

    If all fails and you make a complete mess of the icing, wait till it is dry, then scrape the whole lot off and start again.

    Butter icing

    Butter icing is the world’s easiest, but it is very rich. Many people prefer to use shortening as the fat base, which keeps it much lighter. The only hazard with butter icing is to get enough flavour into it. Like brandy butter (which is, of course, only a butter icing) nothing is nastier than a butter icing that tastes like sweetened butter. Therefore, taste after you have followed the recipe. If you have used a particularly strongly flavoured butter, you will need more chocolate, lemon or whatever you are using. Never try to spread it straight out of the fridge.

    Royal icing

    Royal icing is also simple, using egg white rather than water or syrup to moisten the icing sugar. Add a little lemon juice to counteract the sweetness and do not forget a drop or two of glycerine to prevent it hardening totally. If you do have a cake with unglycerined icing, you would be better advised to saw your way through it with a bread knife rather than to try and cut it, when it will shatter and ricochet all over the drawing room and Great Aunt Ethel. Royal icing can always be broken off and replaced with a new batch. Use a small amount of icing to experiment with the colour.

    Food Repair Guide: Baking Part 1

    Bread

    Bread, being about the first thing that man made, is also about the easiest. Ordinary bread is only flour, salt, liquid and yeast, well kneaded to mix, and baked. The modern cook with a food processor need not even bother about the kneading (which is only done to spread the yeast really thoroughly through the bread) as the food processor does it all for her. Unless, of course, she enjoys doing battle with balls of dough!

    Ingredients/yeast

    Flours differ but, as long as the flour is of good quality and dry, the differences are a matter of personal taste. Water is the normal mixing liquid and sea salt has a better flavour than table salt.

    If the yeast is fresh and alive, when put in a damp, warm atmosphere, it will rise and grow whether it is incorporated in a dough or alone. Old age kills both compressed and dried yeast, as do extremes of temperature: anything over 110°F/50°C or below standard refrigerator temperature.

    Once the yeast has been creamed by mixing it with sugar and a little warm liquid, it needs only to be thoroughly amalgamated into the dough, by hand or machine.

    Diet Start

    Rising, etc.

    After the yeast has been mixed in, the dough must be left to rise, and in some cases prove. This will happen more or less quickly depending on the ambient temperature, but the longer it takes, the better the bread will be. Elizabeth David, among others, maintains that bread that has been left for 24 hours in a moderately warm kitchen will taste far better than bread that has been ‘hurried’ in a warming oven. However, an hour should be the minimum time — unless you are using a food processor and extra vitamin C to assist the raising.

    If the dough does not rise, it means that the yeast is dead — whether through old age or overheating — and there is nothing you can do about it. Dead yeast has a smell and flavour not unlike dead cats and is totally unrevivable. Throw it out and start again.

    Once you have mastered the basic techniques of bread making, all fancy breads are merely an elaboration on them. Most bakery books are extremely explicit in their instructions.

    Cakes

    Raising agents

    Most cakes use eggs or chemical raising agents rather than yeast. The lighter sponges use whisked egg white; heavier sponges or fruit cakes use whole eggs or a combination of whole eggs and baking powder or bicarbonate of soda. These work by giving off gases when heated, thereby raising the mixture. The more chemical raising agent one uses, the lighter, dryer and less keeping the cake will be. Thus, fresh light sponges or angel cakes should be eaten within 24 hours to be at their best; a rich Madeira cake will keep several weeks; a fruit cake several months.

    Mixing

    The early mixing processes in all cake making are important, be it beating eggs and sugar to a ribbon or creaming butter and sugar for Victoria sponges. In both cases, early and thorough beating ensures that the cake will remain moist. Beating later in the process when the flour has been added will make the cake tough, heavy and elastic. Obviously, beating a light sponge after the egg white has been folded in would defeat the purpose of the operation.

    For cakes that need to hold a filling in place — such as a cherry Madeira where you are attempting to keep the cherries in suspension — do not add all the liquid until you are sure that the full amount will not make the mixture too liquid to support the fruit.

    Packet mixtures

    If you feel that you cannot face the traumas of total cake making, there are a great number of excellent packet cake mixes on the market and you might be well advised to give up the whole business of being a home baker and use one of them.

    Cooking

    Follow the instructions in the recipe (or on the packet) for baking times and temperatures but do check yourself, as your oven may not behave exactly as the instructions say it should. Do not, however, continually open and shut the oven, as you will kill whatever chance the poor thing had of rising evenly in a constant heat. Similarly, when you test it, do not be too vigorous. If a light sponge gets a fat skewer stuck in it, it will break the crust and release half the air being carefully husbanded inside. Press the sponge very gently with your finger and, if it resists, it will be done. A more robust cake will stand the skewer treatment but, even then, do not do it more than you must.

    Turning out

    Whether the mixture is from a packet or home-made, it is most important that you are able to get it out of the tin when it is cooked. Greasing and flouring tins should work but has been known, only too often, not to — especially if the butter was salty! Invest in one, or several, loose-bottomed cake tins, which guarantee complete success — not only for cakes but for pâtés, mousses, jellies or anything else that you fear may lurk shyly in its container and refuse to emerge in public. If the mixture is very liquid, as in a very light sponge, line the tin with greaseproof paper to prevent it leaking out the bottom.

    Interested in opening your own WORKOUT ANYTIME?

    Think big. Keep it simple. Do it with integrity.”

    Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

    Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

    “People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

    Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

    Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

    Site Selection and Lease Negotiation

    – We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
    – Site selection/lease negotiation service offered at no-cost to franchise owner
    – In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
    – WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

    Find out more here. 

    Free Weekend – Overwatch and Fallout 4 [Notification]

    Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
    To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

    A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

    See You In The Game!

    Hitman: Absolution – First Impressions and Screenshots

    I finally picked up the latest iteration of the Hitman Series, Hitman: Absolution, starring Agent 47 as the main anti-hero, id est killing the bad guys but never quite [arguably] becoming one of them. Differing from the last couple of Hitman publications, Absolution has an overarching story, connections being made in a chronological manner throughout the various stages and settings. Characters are introduced and developed via cutscenes, as the plot is pushed further by your completing the next mission for a feeling of engagement in the storyline.

    I personally liked this approach, as opposed to the last couple of Hitman games, which seemed like mostly ‘replays’ of old missions from previous games (which in and of itself, isn’t a bad thing). While there were similar settings, such as a Chinese Market Square, they were sufficiently changed enough – especially with the graphical improvements and new gameplay interface – to seem varied enough to be enjoyable. There were even updated versions of [personal] ‘old favorites’ that I waited excitedly for (such as a ‘Hotel’ stage). Slightly more varied than the old versions, if you include the new “Instinct” game mechanic, these levels felt ‘fresh’, even if they weren’t new.

    The “Instinct” game mechanic seems like an effort to simplify the game, making it easier for newcomers and those who had trouble with the complexity and scope of the previous Hitman games. Indeed, I remember reading a lot over the years of people saying the Hitman games were “too big” or “too complex” and that it didn’t help the player much at all, as far as where to go and what to do. It “plopped you down in a large area with just a map”, they felt. Of course, that was the draw for all of the other people, the complexity and seeming openness of the game was enjoyed, where you had to figure out everything yourself. You could decide what to skip and what to do and could decide for yourself how to do it. The new “Instinct” mechanic of Absolution doesn’t take too much away from this (you can turn it ‘off’ if desired) and it actually adds to the cinematic feel of the game by taking the ‘player out of playing’, so to speak, which results in more of a feeling that you are ‘playing Agent 47’, guiding him (and using his innate abilities) through the game, as opposed to ‘actually being Agent 47’ and figuring everything out yourself heavy-handedly. I suspect this more objective approach has already been a point of contention since the game was released.

    An example of Hitman: Absolution’s new ‘Hitman Instinct’ game mechanic, showing how Agent47 can ‘sense’ enemies in and around the nearby area and estimates where they may be heading.

    When utilizing Agent 47’s ‘Instinct’, the game shows where 47 ‘senses’ there are enemies and where they are and shows you on the screen with outlined shapes. It even shows where 47 ‘calculates’ enemies will be moving to, showing you their intended path with a line of flame and where they will stand still with a larger lick of fire. This is where the adrenalin-dipped decision making and primal ‘danger’ awareness kicks in during the game, as a player can choose to set up an engagement with an enemy, or stealthily avoid these paths and points.

    For those who do not like or want the new game mechanic at all, it can be turned off, mainly by choosing a higher difficulty level. There are five to choose from and higher difficulties result in more ‘sensitive’ or ‘aware’ enemies, tougher enemies (wearing more body armor one assumes) and more of them. For those who are new to the game or having trouble with it, the difficulty can be lowered as well, with less enemies, enemies with less skill (not as good at aiming) and less awareness (having a bit more ‘tunnel-vision’) allowing you to sneak around them easier. The option to have this game mechanic off or on, at the players choice, is nice and was no doubt included to appease those who would not like it’s hints and guidance. New players (those talking about the games’ difficulty in the past) can have it on and still enjoy the action and storyline as well. It feels like an ‘attempt to please everybody’ – and I assume it will work well in that regard. (I haven’t read any Reviews of the game (to avoid exposure to the material within) before I purchased it, but I assume that once I indulge in others’ opinions, I will see much disagreement on that last sentence).

    View of a hotel cleaning supply room from an air ventilation shaft. Click to see Full Size

    The game itself felt atmospheric and cinematic. The music changed as action waxed and waned. Enemies ignored or chased you around winding levels that you had to discover and remember. The graphics were spectacular, with detailed textures, dark and gritty lighting and shading. The core Hitman gameplay was there – even if it wasn’t there for very long. This game felt very short to me. Perhaps it was the somewhat simple Television Movie Special plot, perhaps it was the number of missions (although they were split up into sections). Perhaps it was merely enjoying it so much that I wanted more, but just during the course of writing this article off and on, I have completed the game in it’s storyline entirety (not counting Challenges and Item Collection) in just over 20 hours. That doesn’t seem very long, but I suppose it is to be expected in a game that is more like “Max Payne” and less like “Skyrim” (more Action and less RPG). You could keep playing after finishing the main story, select past levels and retry them, doing them ‘cleaner’ for a better score or achievement, or look around and discover new weapons and pathways, or just redo any level you wanted to for fun.

    An example of how the levels are split up into sections and how you can select past levels to replay them.
    An example of the updated game engine, with higher-detailed character models, textures and environments.
    Click to see Full Size

    Other than the copy-pasted ‘general population’ mannequin-people utilized in larger crowds (used understandably to keep memory/resource usage of the game down of course – all of the ‘main’ NPCs have good detail to them), I personally liked the attention  paid to smaller details, such as the amount of debris scattered around the levels – things like cups, papers and garbage, all part of the gritty ‘lived-in-ness’ of the environment, adding to the realism. It’s nice to see games that pay more attention to the surroundings/settings these days, as opposed to the stark, clean-floor environments in games of yesteryear.

    Overall, Hitman: Absolution was very enjoyable. It was great fun to figure out steps and schemes for the various areas and carry them out with cold calculation. I laughed out loud a few times and grit my teeth in anger at the more difficult parts, playing them over and over again, trying to figure out new ways to accomplish the objectives and complete the contracts. Despite feeling shorter (perhaps just because it was so enjoyable) and despite some changes that others might not entirely like, I still suggest trying it (especially if you are a fan of the previous games in the Hitman series). I personally had a lot of fun with the game – and isn’t that the most important thing?

    Have fun with Absolution and See You In The Games!

    Paperless Mission #7: Annotating Rubrics with GoodReader (iPad)

    This is the seventh post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

    • Mission #1: Gather Your Tools
    • Mission #2: Build Evernote Notebooks
    • Mission #3: Email Notes to Evernote
    • Mission #4: Create Checklists in Evernote
    • Mission #5: Organize Your Files in Dropbox
    • Mission #6: Setting Up GoodReader (iPad)
    Also be sure to link up at the Go Paperless! Linky.

    Mission #7: Annotating Rubrics with GoodReader (iPad)

    I try to give my students high-quality feedback whenever possible, especially on their writing assignments. In the past, it would take me days to grade all of their papers and write hand-write comments on their rubrics. So when I passed those papers and rubrics back to students, it would kill me to see students stuff them into the abyss of their backpacks, or worse — toss them into the recycling bin. I wanted them to take it home and share it with their parents, and I wanted them to be able to refer back to that feedback. Eventually I learned to photocopy the rubrics before I passed them back, but that still wasn’t ideal. It created more paper clutter and one more thing for me to work on organizing.
    When I say that GoodReader has become one of my all-time favorite apps, I mean it. I now use GoodReader to fill out rubrics and other student feedback. To start, make sure that you have the rubric saved as .pdf in Dropbox. While GoodReader can read any type of document, it will only annotate a .pdf. Then open up the .pdf of the rubric in GoodReader (see previous tutorial).

    Choose the highlighter tool to highlight the appropriate categories on the rubric. The first time that you go to annotate a document, it will ask you if you want to save to this file or create an annotated copy. If it’s a document that I’m only planning to use once or student work, I typically select “Save to this file.” When I’m planning to use the document over and over again, though, I’ll create an annotated copy. That’s what I’d choose when using a rubric to grade student work.

    Once I’ve made my selection, I’ll be able to annotate all over the document. Once you’re in the highlighter tool, you can drag your finger over the text that you want to highlight. You can change the color of your highlighter, and you can also delete highlights by tapping on the highlighted area.

    At the end of the rubric, I like to type specific comments for my students. To do that, choose the typewriter tool. A little window will pop up for you to type your comments, and then it will save them to the document. If it saves it in the wrong spot, simply tap on the text and a new menu of options will appear.

    You can drag and drop the text into the correct space and re-size the text area to get it formatted the way you’d like.

     When you’re done annotating the rubric, tap the center of your screen to see the “My Documents” option.

    From there, you’ll want to rename your file. To do this, select “Manage Files,” then tap on the annotated copy of your rubric and select “rename.”

    Once you’ve renamed your document, you’ll have some options for moving it. First, I send a copy to the student’s notebook in Evernote. To do this, tap “Manage Files” again, select your newly renamed document, and select “Open In.” A new window will pop up asking how you’ll want to save the file. Select “Flatten annotations” because that will preserve your edits and merge it into the document so that you don’t lose your work.

    Once you’ve chosen that, another window will open showing which of your installed programs you can open it in. As you can see, I’ve get several options available. You could also upload it directly to Dropbox if you would like to back up your work there rather than in your student notebook. This might be a good option if you have a folder shared with the student for passing back work.

    When I’m ready to hand back the rubric to students, I open it in Edmodo and attach it as a direct message to the individual student. This allows the student and his or her parents to see it. They could also download a copy if they’re using a computer. (I’ve had mixed results with document downloads through Edmodo on the iPad.)

    This system has been incredibly helpful for me. It’s easy to manage because I don’t have to keep track of paper or make sure that I’ve made enough copies of the grading rubric before I start grading. Just one more step in the quest to curb paper clutter.

    What are some other ways you can imagine using GoodReader in the classroom? I’d love to hear your ideas in the comments section!

    Why Teachers Love Technology

    An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

    What do we Know Infographic
    Graphic from OnlineUniversities.com

    Do you love technology? I’d love to hear why in the comments section!

    Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

    In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

    • capture points
    • shields
    • generators
    • spawn rooms
    • terminals
    and more…
    In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
    During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

    Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
    [A separate tutorial for an Amp Station can be seen here:
    http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

    With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
    Enjoy and See You In the Game!

    What Kind of Protein is Best?

    There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

    Diet Start

    The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

    If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

    Mt Trip to Manila, Philippines cont……..

    I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

    I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

    I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

    In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

    Authors Are People, Too!

    Oh, bloggy friends, I have missed you! This year is kicking my behind! I had high hopes that I’d still be blogging with great regularity this year, but alas…between my 28 awesome fourth graders, the start of my PhD, and my incredible two-year-old daughter, time is an oh-so-precious commodity. By the time my little one makes it to bed at night, I. am. wiped. out. And then I usually have textbooks to read and papers to write. But not today.

    Today, I wanted to share with you the very awesome author visit we had at my school.

    Granted, it’s old news by now. It happened during the Decatur Book Festival on Labor Day weekend, which, by the way, is one of the coolest things you can do in the Atlanta area if you’re ever here for Labor Day. But my experience was cool enough that I still wanted to share…four weeks later…

    Every year as part of the book festival, 1 or 2 children’s authors come and talk at our school. This year, the fourth graders got to listen to Chris Grabenstein. If you’re not familiar with him, you should seriously run, not walk, but run to get his new book, Escape from Mr. Lemoncello’s Library.

    This book is the story of Kyle Keeley, an avid game-player who wins a contest to spend the night in the new library built by master game-maker Luigi Lemoncello. As Kyle explores the library, however, he realizes that winning the contest was just the beginning, and a whole new game with high stakes, twists, and turns is starting. It reminds me a little of Willy Wonka and the Chocolate Factory, and Roald Dahl is just one of many authors referenced in the book. It’s very clever, fast-paced, and entertaining. I started it as a read-aloud when we found out that Mr. Grabenstein was coming, and we seriously couldn’t put it down. It was one of those books where I’ve had multiple students go out and buy it on their own because they couldn’t handle waiting for us to read it in class. It’s way up there on my recommendation list.

    Mr. Grabenstein definitely inspired the students as writers. He shared a lot about his writing process, but his overall message was to just let it flow without editing yourself. To illustrate that, he modeled writing a story for the students. Prior to starting, he gathered 5-6 random words that students had written on sticky notes. He stuck those in his back pocket. Then, he projected a crazy picture.

    He explained the difference between a protagonist and an antagonist, and he encouraged students to “Ask yourself, ‘what if…?'” He said that there are always a few questions you need to think about when planning a story.
    • Who is this guy?
    • What does he want?
    • Where is he?
    • Who wants to stop him?
    • Why?
    He then took student suggestions to answer those questions and plan his story.
    Next, he had students come up with a starting sentence: “My face hurts,” and an ending sentence: “He ate radioactive iridium isotopes” so we would know when his story was starting and ending. And then he just started telling the story. It was hilarious! At various points throughout the story, he would pretend to be stuck and pull a word out of his back pocket, and no matter what it was, he just rolled with it. He has a background in improv comedy, so I suspect that helps. Still, it really hit home the message that you shouldn’t censor yourself while you’re drafting — you can always go back and change things later if you need to. When you’re drafting, you should just let it flow to wherever creative place you’re led. 
     We were pretty inspired by his presentation, and we went back to the classroom to a) write, and b) read more of his book. The kids were so excited! We were totally unprepared, however, when he came into our classroom about an hour later. (So unprepared, in fact, that some of my students were still working on their vocabulary tests on Spelling City!) 

    Usually when authors have come to our school, they’ve given their presentations, signed a few books, and then split. Mr. Grabenstein went above and beyond, happy to spend his day engaging with the kids and taking an interest in what they were doing. They barraged him with questions, and he answered openly and honestly, encouraging the kids the whole time. Needless to say, Mr. Grabenstein has secured quite a fan base in Eberopolis.

    In the weeks since his visit, we’ve had countless conversations in writing about some of the little tidbits Mr. Grabenstein shared with us, but more than anything, I loved that my students got a chance to see that authors are real people, too. They have good ideas and bad, writer’s block and inner editors just like the rest of us. But they power through those hurdles, and we get some fantastic books as a result.

    Thank you for visiting us, Mr. Grabenstein. It was definitely a highlight in our year.

    Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

    Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

    A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

    However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

    Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

    I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

    Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

    You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

    Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

    [Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

    Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

    Workout Anytime in North Fulton Newspapers

    Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

    New Workout Anytime coming to Milton
    By: Caitlin Wagenseil
    MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

    Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


    (Read More)

    Men’s Body Click Diet part 4

    Benign Prostatic Hypertrophy and Prostate Cancer

    Benign prostatic hypertrophy is an enlargement of the prostate that’s called benign because it is not due to cancer cells. Still, the enlargement can be far from benign if it results in a lack of control over functions that we all take for granted, including urinating when you want to urinate and only then. A single urinary accident in front of your classmates in the first grade can constitute a major, unforgettable scar in one’s childhood; a repeat performance, like that of my sixty-year-old patient while standing in line at the check-in counter at O’Hare Airport, is no joke either. Nor is `benign’ the right word to describe the condition that underlies such loss of control. BPH may also involve getting up frequently at night to urinate, with the intense urgency to do so unfortunately combined with a disconcerting hesitancy of performance and a lack of reward in the volume of urine produced.

    Although the symptoms of BPH can be severe, it is ironic that men with prostate cancer often have no symptoms. As they age, most men, on biopsy, show signs of prostate cancer. In fact, by the time they are in their eighties, nearly all men have prostate cancer, as defined by the typical cancerous appearance of cells under the microscope. Yet, because this particular cancer grows slowly and spreads infrequently, only a small percentage of men actually become sick or die from the disease. (A man’s lifetime risk of dying from prostate cancer is a little less than three per cent.)`’

    Diet Start

    Given the low odds of illness or death from prostate cancer, it’s confusing from a medical standpoint when a 60-, 70- or 80-year-old man has a prostate biopsy and is found to have cancer cells. Because the question of the actual malignancy of the condition — how likely it is that the cancer will grow quickly enough to cause problems — is difficult to resolve, it encourages a more aggressive approach to therapy than might otherwise be warranted. Since aggressive therapy frequently involves either removing testicles or taking female hormones, which can produce dramatic changes in a man’s body, this is not a trivial question.

    Natural therapies for treating or, more important, preventing illness are not usually studied in the same way as pharmaceuticals, because no one can patent a naturally occurring substance like flaxseed powder and make enough money to justify the enormous expense of carefully conducted, controlled and double-blinded studies. Still, the studies show that consuming soy protein and other isoflavone and lignan-containing foods reduces the risk of prostate cancer. And the cancer data suggest strongly — and there is abundant anecdotal evidence to support it — that the same hormonal environment that leads to the high incidence of cancer in older men inour culture, but not in Chinese and Finnish men, is also associated with the risk for prostatic enlargement.5

    The simple strategy for preventing the range and frequency of prostate problems is to consume more soy protein, flaxseed powder and rye fiber. If you happen to be a regular bacon, ham or sausage and eggs kind of guy, I urge you to substitute the shake, with its soy protein and flaxseed powder, at least four days a week. It’s good that you’re eating protein at your morning meal and getting the lift you need at the beginning of the day, but what you’re eating will not protect your health like soy protein and flaxseed. (If you don’t have time for breakfast, see the section for travelers in the appendix, where you’ll find a quick shortcut that will help you get your soy protein and flaxseed every day.

    The Body Clock Diet and Heart Disease: It’s not Just the Cholesterol

    Coronary heart disease (CHD) is the number one killer of both men and women in the United States. Each year, more than five hundred thousand Americans die of heart attacks caused by CHD. Soy intake has been shown to lower cholesterol and decrease cardiovascular disease associated with high cholesterol. There is growing scientific evidence to support this; for example, one recent study showed that a diet high in soy protein reduced cholesterol by as much as 20 per cent. 6 Other research has demonstrated that soy protein lowers triglycerides and reduces the oxidation of LDL or ‘bad’ cholesterol, which contributes to blood vessel problems linked to cardiovascular disease? And flaxseed has also been shown to lower both total and LDL cholestero1. The Body Clock Diet, which includes daily intake of soy protein and flaxseed powder, ensures that you get this important protection.

    But cholesterol is not the exclusive evil agent in heart disease. Some people, especially those with complicating conditions of diabetes, tobacco smoking and a strong family history of heart disease and obesity, carry cholesterol-related risks. But most people who have heart attacks and other complications of ‘hardening of the arteries’ have fairly normal cholesterol levels.

    The tide of medical thinking is changing when it comes to heart disease. It looks as if issues related to carbohydrate excess, insulin resistance and homocysteine and its control by folic acid will take center stage away from cholesterol. 9 The benefits of substances like flaxseed and soy are not due solely to lowering cholesterol. Soy and flaxseed do indeed lower serum cholesterol, but they also modify carbohydrate and fat metabolism, further decreasing your cardiovascular risk. You don’t have to be takingaim at your cholesterol to get benefits from soy, flaxseed and the Body Clock Diet.

    Like many men, you may have a tendency not to think about your health, shrugging off warnings from your mother, spouse, doctor and children as well as newspapers and television programs that try to scare or educate you about activities that are dangerous to your well-being. Nor do you want to listen to me when I say that failure to adhere to basic circadian principles may eventually show up as something noticeably wrong with your health. But my advice is simple: there are some painless things you can do to reap what are potentially major rewards for your long-term health.

    Paperless Mission #9: Setting Up Your Class with Evernote

    This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #9: Set Up Your Class with Evernote

    Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

    It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

    And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

    Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

    Step #1: Register for new Evernote accounts.

    This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

    I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

    I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

    Step #2: Build Notebooks for the Subject Areas

    My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
     

    Why Student Evernote Notebooks Rock

    1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

    2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

    3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

    Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

    Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

    What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

    Peanut Benefits for Health

    PEANUT BENEFITS FOR HEALTH

    Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
    Peanut Benefits For Health - 1
    Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
    Peanut Benefits for Health
    1. Helps To Increase Fertility
    For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
    2. It Can Prevent Painful Gallstones
    During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
    Peanut Benefits For Health
    3. Can Help Reduce Depression And Stress
    Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
    4. Can Improve Memory
    The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
    5. Lowers Bad Cholesterol
    Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

    Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

    I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

    Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

    Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

    I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

    If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

    Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

    And click here to see my review of Chapter 2!

    Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

    Thanks for reading,

    Paperless Mission #10: Distributing Student Assignments

    This is the tenth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

     

    Mission #10: Distribute Student Assignments through Shared Folders

    Once my students had their iPads, I needed to figure out a way to get their work out to them. At first I tried using Edmodo, but that proved to be a bit glitchy for assignments where I wanted students to work with the materials in a different app like GoodReader. I needed to figure out an easy to manage workaround. Welcome back, Dropbox!
    To do this, I created a new folder on Dropbox called “Student Assignments.” I then right-clicked on the folder to pull up the option to “share link.”
    This pulls up a new window that shows the internal content of the folder in the background. Here, you could enter in a bunch of email addresses, but I prefer to click on “Get link.” This copies a link to your clipboard for you to paste somewhere else.
    Once I had the link to the folder, I put it in a highly visible spot on my class website. My students use my class website constantly, so getting to the link was easy for them once they knew where to find it. 
    Once the folder was shared, I started to create the internal contents of the folder. I created 6 folders inside — one for each day of the week and an archive folder. 
    I numbered the days of the week to control the order of the files. Dropbox will alphabetize the folders otherwise.
    As I gather resources or assignments that I want students to access, I save them as pdf files and I just put them in the folder to match the day that I expect them to do the assignment. At the end of the week, I move everything into the Archive folder, and I start over creating the assignments for next week. 
    This system has worked incredibly well for me! Here’s why:
    • Items in Dropbox sync immediately, so if we’re in the middle of working on something and I realize that I’ve forgotten to give students something that would be helpful, I can just drag it into the folder. I don’t have to sprint down to the copier. 
    • It’s the ultimate organizer for absent students. If a kid misses class on Tuesday, they (and their parents) know to go to the Tuesday folder to see what assignments are there. There’s no more worrying about lost papers or assignments.
    • The archive folder provides a great back-up for lost work. If a parent can’t find a reading or a study guide to help before a test, there’s an easy place to go to see all of the work.
    • It only requires a one-time set-up. Since I’m sharing the external folder and not the individual folders or assignments, I can change out what’s inside the folder without having to get a new link to share. 
    • It doesn’t require any log-ins or sign-ups from my students. They don’t have email yet, and they don’t have Dropbox accounts of their own, but that doesn’t matter. Accessing shared files on Dropbox doesn’t require a log-in of any sort. 

    I’ve been incredibly happy with this system. Everything that I would have copied in the past has been easily distributed through my shared folder in Dropbox. 

    What are some other ways you could use shared folders in Dropbox? I’d love to hear your ideas in the comments.

    And More: Deal and Sales – Battlefield 4 Expansion, Second Assault is Free from EA – Two Days Left [Notification]

    Just a quick mention, for those who didn’t catch it yet or for those who play [or never stopped playing!] Battlefield 4Second Assault, the Expansion pack that adds Four Maps, Five Weapons, Ten Assignments and more, is currently being given away Free from EA/Origin until the 28th – that’s only two days left to go get it!

    Battlefield 4: Second Assault Expansion Pack Information Panel
    in the “On The House” Section [ Free Games > On The House] in EA’s Origin Game Client (Click to see Full Size)

    Note that you need to already own Battlefield 4, as this is an Expansion Pack, but you can still get it now – even if you don’t own BF4 – and play it later. Go and Download it now! GOGOGO

    Battlefield 4: Second Assault Expansion Promotional Wallpaper by EA, Unedited
    (Click to see Full Size)

    See You In The Game!

    WORKOUT ANYTIME in the Daily News

    WORKOUT ANYTIME in the Daily News

    Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
    View the full article here. 

    10 Must-Have Tools for the Busy Teacher

    This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

    If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

    1. Nozbe

    Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

    2. Evernote

    This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

    3. Dropbox

     I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

    4. GoodReader


     I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

    5. GoogleCalendar

    I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

    6. YouCanBook.Me

    This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

    7. Planbook.com

    Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

    8. Typinator

    This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

    9. GoodReads


    Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

    10. Edmodo

    I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

    With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

    What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

    This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

    Globesity

    THE RISKS FROM OBESITY

    Being overweight can induce:

    ¨ Diabetes (type 2: non-insulin‑dependent)

    ¨ Coronary heart disease and strokes.

    It increases the risks of:

    ¨ Cancer of the colon, prostate, uterus, cervix, breasts and ovaries

    ¨ Gall-bladder disease

    ¨ Musculoskeletal disorders and respiratory problems.

    We live in a world where half the population seems to be obsessed by dieting, while the other half is suffering from starvation and malnutrition. We have no control over the natural disasters that leave millions fighting to find enough food to survive, but why is it that so many people — not just in the Western world, but also in developing countries — are becoming overweight, leading to soaring levels of diabetes, cardiovascular disease and certain cancers?

    We may have made huge advances in technology, but we seem to have lost our connection to nature, and nowhere is this better illustrated than in the food we eat. Our meat is sold in sterile packaging, and contains antibiotics, growth hormones and pesticide residue. We eat (well, some of us eat) fruit and vegetables that are sprayed, waxed, dyed and sometimes irradiated to make them look attractive. The grains that form the bulk of many people’s diets are stripped of their fibre and nutrient content. And the milk we drink is pasteurized.

    Diet Start

    Because there is so much choice, so little time and sometimes so little money, many people choose the convenient pre-packaged or fast-food option, rather than insisting on good-quality, naturally produced, locally available produce. They would rather sit and watch a cookery programme on television while eating a TV dinner or a take-out than get into the kitchen and cook a healthy meal for themselves.

    According to the World Health Organization (WHO), in 1995 there were an estimated 200 million obese adults worldwide, and by 2000 that figure had increased to 300 million. But obesity is not just a problem restricted to adults -25 per cent of children and adolescents in the US are overweight. The problem is beginning to replace malnutrition and infectious diseases as the most significant contributor to ill health worldwide. Obesity is now recognized as a disease in its own right, but one that is largely preventable through changes in lifestyle – especially diet.

    A lesson from dietary history

    For years we have been fed the information that a low-fat/high-carbohydrate diet is the healthiest one for us. The ideal ratio, based on our calorie intake, is 55 per cent carbs, 15 per cent protein and 30 per cent fats. This ratio may work for some individuals, but it certainly isn’t right for everyone, particularly those whose carbohydrate intake is based on the wrong sort of carbs.

    One of the most thought-provoking arguments for reducing the amount and type of carbohydrates that we eat is the story of Palaeolithic people. Genetically, there is very little difference between ourselves and our hunter- gatherer ancestors, although our diet has certainly changed.

    Palaeolithic people were treading the Earth thousands of years before we started to cultivate crops and rear animals for food, and according to scientists they existed on a diet that was primarily protein. Between 60 and 90 per cent of their diet consisted of game animals, eggs, birds, reptiles and insects. The rest comprised green leafy vegetables and berries. Obviously they were leading a far more active life than the average 21st-century human being, but their diet must have been in part responsible for their healthy bones, flawless teeth and good musculature.

    It was only at around the time of the agricultural revolution, about 10,000 years ago, that we started to rely on starchy vegetables such as potatoes and cereal crops for the bulk of our diet, and lifestyles became more sedentary. By 4,000 years ago the effects of the change in diet were beginning to be seen in the human body:

    ¨ There was a reduction in people’s stature

    ¨ Dental decay and malformation of the jaw had become widespread

    ¨ Disease and epidemics were starting to shorten the human lifespan.

    My Trip to New Delhi & Hyderabad Cont…….

    Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

    On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

    reACT Trainer Total Body Circuit Workout

    One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

    Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

    Horizontal Press (chest press of some type)

    Horizontal Pull (Row of some type)

    Overhead Press

    Vertical Pull – (some type of vertical pulling movement)

    Here is a sample reACT Trainer Total Body Circuit:

    Teacher Toolbox Trio Linky Celebration!

    Since the advent of Teachers Pay Teachers, my teaching toolbox has changed quite a bit. There are so many things that I’ve made or bought for my classroom, and there are many others that are on my wishlist. To recognize that, I’m hosting a Teacher Toolbox Trio linky party.

    Here are the rules of the trio:
    1. Share a product that you’ve made that you couldn’t live without.
    2. Share a product that you’ve purchased that you love.
    3. Share something from your wish list that you’re hoping to get for next year.

    If you’re not a seller on TpT, no worries — just share two products you’ve purchased that you love!

    1. Something I’ve Made

    The Classroom Economy Megapack was my first major project for TpT, and without question, it was the one that I used all the time last year. It has everything I needed for setting up my classroom jobs, monitoring daily behaviors on a clip chart, running my classroom economy, and giving students free/very low-cost rewards. Unlike my units that were used here and there, this was on display in my classroom all 180 days, and my kids loved it. This is the one thing that I could not live without.

    2. Something I Purchased

    Erin’s “A Roller Coaster Day” sub plans were amazing! I had to go to an all day district committee meeting on a Friday in May when the kids were already getting a little crazy, but they LOVED this. The sub said it kept them engaged all day, and given that I was already at the stage of the year when all of our required curriculum had been taught, it was perfect. It will be a permanent addition to my sub folder, and she’s also made one for grades 5-6. You can follow Erin’s blog: I’m Lovin Lit. 

    3. Something on My Wish List

    I’m really planning to focus on math facts and mental math skills early in the school year, and Laura Candler’s Mastering Math Facts has been on my radar screen for a while. I’m hoping to snag a copy before I go back in July. (Yes, July!)  Laura’s blog is Corkboard Connections.

    The Linky Celebration

    This is more than just a party — it’s a celebration! I’ve been meaning to do something to celebrate hitting 100 followers for a while now, and as I near the 150 mark, it’s definitely time! If you link up through the tool below, you’ll be eligible to win a $25 gift certificate from Teachers Pay Teachers — enough to possibly clear off some items from your own wish list!

    clip art from KPM Doodles
    I’ll be using a random number generator to select the winner from those who link up. The linky celebration will end next Friday, June 14 at 11:59pm EDT and the winner will be announced on my blog on Saturday.
    Can’t wait to discover some new products and see some of your favorites! Be sure to link up below, and please include the Teacher Toolbox Trio icon and/or another link to Eberopolis in your post.

    Happy linking!
    document.write(”);

    And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

    Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

    Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
    (Click to see Full Size)

    Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

    The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

    I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

    [Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

    INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

    This small apartment is an example of how to make the most of a limited space.This live well in apartments provided with large windows giving good natural light, open spaces and good storage options, including a large sub basement. The lounge is spacious and decorated in bright materials.

    INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

    INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

    Upstairs is a beautiful model Dutch prosecutors. Create the mural are welcomed into a room like this.The the kitchen is located between the lobby and hall, and it offers plenty of cooking space. It is an ingenious closet in the hallway. As you can see, the secret of this event to find creative storage.

    INTERIOR DESIGN FOR A SMALL APARTMENT

    INTERIOR DESIGN FOR A SMALL APARTMENT

    INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

    INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

    INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

    INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

    INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

    INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

    Sample Dining Room Minimalist Design Idea

    Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

    Sample Dining Room Elegant DesignSample Dining Room Elegant Design

    Sample Dining Room Classic DesignSample Dining Room Classic Design

    Sample Dining Room DesignSample Dining Room Design
    Sample Dining Room Elegant DesignSample Dining Room Elegant Design

    Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

    Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

    Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

    To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

    • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
    • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
    • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
    • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
    • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

    That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

    Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
    the recording utility built into the NVIDIA Drivers
    (Click to see Full Size)

    Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

    Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

    Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

    • Uninstalling/Reinstalling GeForce Experience
    • Installing an older version of GeForce Experience
    • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
    • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

    Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

    Rörstrandsgatan Popular Extraordinary Penthouse

    Extraordinary penthouse in the popular Rörstrandsgatan.

    Extraordinary penthouse
    Extraordinary Penthouse
    This confidential loft with windows on all sides there is an optimal location in the circumcircle Birkastan. A rarity in the design and location where the architect has planned floor in every detail to create an open atmosphere where the different rooms in a natural way integrated with each other. This floor will host a social get-together in a bright environment with plenty of space by nearly 5-foot ceilings in the ridge and a large sunny terrace right next to the kitchen. Beams are tastefully built and floor is one of few lofts that are not constrained by snetak. 
    Well-chosen and thoughtful details include floor heating under beautiful oiled oak parquet flooring and dimmable spotlights throughout the whole apartment. In the living room we find a plastered fireplace with adjustable chimney sat on the black painted fire brick. Modern sound systems are drawn into the walls. Windows are fitted with double glazing which means, in principle, completely eliminated the sound inlet and heat protection glass to keep the floor cool in the summer time. The kitchen is very lavish and signed exclusive German manufacturer Bulthaup. The kitchen is consistently white countertops in the unique composite material is white Corian. The machinery in Alufinish come from reputable Gaggenau. The two bedrooms are furnished with site-built wardrobes and the slightly larger bedroom has both big walk-in closet and bathroom adjacent. Both bathrooms enjoy exclusive furnishings and are equipped with underfloor heating. One of the bathrooms have both shower and bath and the other only shower. Modern washing machines and tumble dryers from Miele. 
    Rörstrandsgatan is one of Stockholm’s main restaurant streets with wide range of pubs, cafes and bars. Nearby is also an opportunity to cozy walking and jogging along the Karlberg Canal. Or how about a picnic or playing tennis in Karlberg Palace Park, only a few hundred meters away. Good communications in the form of Karlberg station with both commuter rail and bus service as well as St. Eriksplan underground station.
    LivingsRoom
    LivingsRoom

    BeDroom Design
    BeDroom Design

    Bathroom Desing
    Bathroom Desing

    Design Schema
    Design Schema

    My Next Assignments…………

    Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

    Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

    The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

    • The client is not clear about what they want
    • They are haggling about rates and costs
    • The client is unsure about you and the organization you represent
    • Does not know / have the resources / decision making power to use the results of the assignment

    I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

    My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

    The 1 Minute Workout

    The number one challenge people to give to not working out is time.   So the question fitness professionals should be focused on is what is the LEAST amount of time for working out and still producing the benefits and results that people want and need.
    The great news is that there is a lot of well done research on this subject, and there is a proven workout protocol that produces results with as little as one minute of total work time in a workout and a total workout duration of under 10 minutes including warm-up and cool-down.
    The definitive work on this subject was written by Martin Gibala and is appropriately called “The One Minute Workout”.     In this excellent book he reviews all the related research and results on High Intensity Interval Training including an excellent review on the psychology of exercise as it relates to how people feel before, during and after different types of exercise protocols.     Long story short people really like certain HIIT protocols – even high deconditioned people and high-risk heart disease patients.
    He and his team of researchers proved the effectiveness of the 1-minute workout to produce results and also found the specific physiological mechanisms responsible for the benefits of this protocol.
    1 Minute Workout Protocol

    Warm-up for 3 minutes at an easy pace on any piece of cardiovascular exercise equipment, walking, 
    running, jogging or cycling depending on your preference and fitness level.
    Do a 20 second sprint at your best possible pace (this is all relative to your fitness level)
    Do active recovery at a light pace for 2 minutes
    Perform another 20 second sprint at your best possible pace.
    Do active recovery at a light pace for 2 minutes
    Perform a third and final 20 second sprint at your best possible pace.
    Cool-down for 2 minutes.
    Total workout time – 10 minutes!
    Frequency

    Best results are obtained by repeating this workout 3 times per week BUT even once a week will provide benefits and help maintain a decent level of physical conditioning – the key is intensity NOT duration or frequency.

    Recommended Reading:    The One Minute Workout by Martin Gibala:  https://www.amazon.com/One-Minute-Workout-Science-Smarter-Shorter-ebook/dp/B01IOHQ7RA/ref=sr_1_1_twi_kin_2?s=books&ie=UTF8&qid=1517152066&sr=1-1&keywords=the+one+minute+workout+by+gibalaAvailable in hardcover, paperback or kindle.

    Nutritional Strategies for Allergy and Asthma

    SeasSeason allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
    Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
    What are Allergies Anyway?
    Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
    Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
    Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
    Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
    Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
    Strategies for Allergies
    Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
    Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
    Boos
    Increase your intake of Omega 3 Fatty Acidsfrom cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
    Nutritional Supplements for Allergies
    There are several highly effective nutrition supplements for allergies including some key herbs.
    Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
    Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
    Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
    Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and the best form of quercetin is contained in a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.
    Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
    Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
    NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
    You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

    Workout Anytime Daily 10 Prehab Routine

    Everyone knows that prevention is better than dealing with an injury, and part of injury prevention is spending time working on what are commonly referred to as “corrective exercises” or “Prehab”.   10 minutes a day spent doing 10 basic exercises can prevent many injuries, improve results from exercise, and dramatically improve movement.
    Ideally do these exercises barefoot or in socks – your feet will be working very hard during these exercises and shoes reduce ground feel.  If possible do them in front of a mirror to see your form!
    Hip Hinge – Hip Hinging is one of basic primal movement patterns, and it is also the movement pattern most frequently done incorrectly.   The best way to groove this movement pattern is practice it using a wooden handle or PVC Pipe held vertically against your back touching the back of your head, the top of your shoulders, and your tail bone.  By keeping contact with all three points as you hinge it teaches you to maintain a flat back which is essential for preventing low back injuries and developing proper movement mechanics that allow you to effectively load and unload the glutes and hamstrings.
    It is also a phenomenal dynamic warm-up for the hamstrings!   Here is a video showing how to do it:  https://www.youtube.com/watch?v=PG67O49Hsso    Do 50 reps per day and you will see and feel positive changes in your posture, movement, strength and mobility!
    Downhill Skier Exercise– This exercise contains elements of the squat and hip hinge.  Start by placing the hands palm down on the top of the thighs.  Keep the back straight slide the hands down until the palms are resting on the knees with the hips back like you are a second basemen.   You should begin to feel a stretch in the hamstrings.     Continue to hinge from the hip forward and slide down until your elbow are resting on the inside of the knees with back straight and hips back like you are a downhill skier.  This will require your knees to track forward over and maybe even slightly beyond your toes (this will generate a stretch in the calf muscles and specifically the single joint soleus muscle).    Keep your heels down the whole time – do not let them lift up off the floor!
    Keeping the back totally straight extend the knees as far as possible – you should feel a strong stretch in the hamstrings.  Your hips will rise but keep your elbows on the knees and do not move the upper body!  Then drop the hips, flex the knees and let them move forward over toes as you drop back down to the downhill skier posture.
    Start slow but as you get the hang of it you can move faster – as long as you maintain proper form.     Do 30 – 50 reps every day.   You will start to notice that your squat and your hip hinge movements all get easier along with improved mobility in the ankle knee and hip!   Click here for a great video of how to do this exercise properly:  https://youtu.be/nXKWtlr3rBQ
    Goblet Squat – Squats are another primal movement pattern and goblet squats help emphasize the best form.   They should be done daily with a relatively light weight for a good 20 – 50 repetitions.    Keep the dumbbell, kettlebell or Sandbag held against the chest the entire time. If you have difficulty getting thighs parallel to the floor spread your feet farther apart, and also rotate out at the hips so that your feet are pointing outwards.   This can make a huge difference.   By doing this and holding a light weight against your chest you may find you can squat to a decent depth while maintaining an upright torso.  It should look like this:  http://cfitness.me.formecdn.com/2016/12/goblet-squat.jpg  
    Alternatively you can hold a kettlebell/Dumbbell with both hands letting it go straight down between the legs as you squat down like this:  http://workoutlabs.com/wp-content/uploads/watermarked/Pile_Sumo_Dumbbell_Squat1.png
    Single Leg RDL – Romanian Deadlift – is one of the most important corrective exercises you can do to help self-identify and correct muscle imbalances that are the most common cause of movement dysfunction and injury.
    The best way to do this exercise is barefoot in front of a mirror where you can see your whole body throughout the entire sequence of the exercise.  Ideally you should be on a firm and level surface as well.
    Start by facing the mirror standing on one foot with the other leg flexed so your thigh is parallel with the floor and knee flexed to 90 degrees with hands on your hips.  Look in the mirror and make sure your hips are perfectly level and if not fix that!   
    Next, without moving the upper body extend the flexed leg down and hinge forward at the hip of the standing leg.   As your swing leg passes the other leg you should try to straighten it, and ideally you hinge forward at the upper body while keeping your swing leg and upper body in a straight line the whole time.
    As you hinge try NOT to let your swing leg hip drop and keep your stance foot pointing directly forward with no angle.  The stance leg should flex slightly but the knee should NOT move forward – rather you should “sit” back into the hinge at the hip. Pause when you reach at or near parallel with the floor with your upper body and swing leg then smoothly return to standing and flex the swing leg.    Slower is harder AND better and do NOT use any load/weight.
    10 repetitions on each side each day!   Do all 10 on each side one time per day and you will see some amazing changes in your strength, balance and athleticism! 
    Here is a great single leg RDL tutorial:  https://www.youtube.com/watch?v=vc21IwnIcwk
    Hip Thrusts – The hip thrust simultaneously develops the glutes while enhancing mobility in the hip flexors (both key because this counteracts the negative effects of sitting all the time!).  These can be done on the floor or with shoulders on a bench, bed or sofa to make it a bit harder.   You can do hip thrusts with two legs or one leg at a time to create additional load.   Here is a good shot of the exercise:  http://cdn-www.womenshealthsa.co.za/wp-content/uploads/2015/02/hip-thrust-hold.jpg
    Important NOT to arch lower back at all and concentrate on squeezing glutes at top and NOT using low back.    Even without any load this exercise can produce great benefits – 20 – 50 reps each day!
    Plank – The plank is a simple functional core exercise that produces great benefits.  It can be done on toes and hands (upper push-up position), Toes and Elbows, Hands and Knees, etc to adjust the difficulty.    Do a version of the plank that challenges for one minute per day while maintaining good form.   Here is a great article on some of the many variations:  http://www.health.com/health/gallery/0,,20813896,00.html/view-all
    Side Plank – The Side Plank is also key to building core strength, but in the front plane (side to side stability and strength).   30 seconds to a minute on each side each day.   Like the plank there are many variations and one of the best when you are ready is a side plank with leg lift: https://rutheburke.files.wordpress.com/2015/05/side_bridge_abd.jpg
    Static Lunge – Lunges are another primal movement pattern, and there are many different variety of lunges.  A static lunge is done with feet in a split stance like this:    https://www.google.com/imgres?imgrefurl=http://thefitnesslink.uk/exercises/static-lunge/&tbnid=J1sOV9EYH0PmVM:&docid=lgeVWz3ThLe7OM&h=1417&w=1890   
    The exercise is fantastic for simultaneously developing strength and mobility in the foot, ankle, knee and hip.  Best done barefoot on a firm surface.  Keep your front heel down the entire time and rear foot is up on ball of the foot with rear knee, hip, back and head kept in alignment the entire time.    Do 10 reps at a time on each side per day – no weight is necessary. 
     
    Side to Side Skater– This exercise develops hip mobility including providing an excellent dynamic stretch/warm-up for the adductor (inner thigh muscles).  Feet should be wide apart with feet facing forward – not angled out. Keep feet flat on the floor and flex forward at the hip keeping back straight (only flex forward as far as you can while maintaining a flat back and keeping both feet on the floor with entire foot kept down in contact with the ground).   Push the hips directly to the side and pause as you feel a stretch in the trailing leg’s adductors.  
    Ideally your head and torso stay perpendicular to lower body and centered during the entire exercise just like a speed skater.  Then push your hips back in the other direction to the other to the other side.    NOTE:   Do NOT go up and down – your hips should go back and forth in a straight-line parallel with the floor.   Do 20 – 30 reps each day.
    Ankle Circles – This exercise improves ankle mobility and is great before just about any activity.    Stand on one foot.    These can be done seated, standing or lying down – best done standing to simultaneously work on balance and stability.  The action is simple:  holding foot and leg in the air draw a circle with your toes for 10 circles in one direction and 10 circles in the other direction like this:  http://web.eccrsd.us/christy/public/athletic_training/ankle_sprain_rehab_beginner_files/Picture%201.jpg   
    You will notice that one direction is much harder than the other and you will feel much less coordinated and same thing with one leg vs the other leg.  Do more repetitions in the direction that is challenging and more on the leg that is more challenging.  Ideally do the exercise while you stand on one foot while you pull your other leg up with knee bent so that your thigh is parallel with the floor.    This is more challenging than it looks but will provide big benefits in terms of balance and stability.

    Done daily and before workouts these 10 exercises will provide big benefits including improved posture, stability, strength and mobility.   You will also notice that you improve at many other exercises and movements.

    DESIGN ROOM HOTEL LE ROYAL MONCEAU

    DESIGN ROOM HOTEL LE ROYAL MONCEAU

    DESIGN ROOM HOTEL LE ROYAL MONCEAU

    Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

    37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

    WORKOUT ANYTIME on WYFF Greenville

    WORKOUT ANYTIME on WYFF Greenville

    Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
    View the segments here and here. 

    It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

    For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

    Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

    https://www.humblebundle.com/software/vegas-pro-creative-freedom




    For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

    The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

    As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

    Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

    If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

    By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

    • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

      http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

    • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

      http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


    [Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

    Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

    Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

    http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

    So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

    Good Luck with it – and Have Fun!
    [Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

    Addendum:

    During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
    If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

    HOW TO DECORATE A KITCHEN MINIMALIST

    A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

    Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

    Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

    A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

    Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

    TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


    Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


    Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

    This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

    The Experiment

    For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

    Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

    The Test

    For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
    I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

    The Data

    Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

    FurMark: Score (2127), Average Framerate (40fps)
    FurMark: Score (3959), Average Framerate (65fps) SLI
    Lost Planet 2 – Benchmark B: Average Framerate (44fps)
    Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
    Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
    Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
    Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
    Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
    Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
    Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

    Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
    Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
    Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
    Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
    (Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

    Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
    Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
    Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
    Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




    Here are some unscripted, raw gameplay framerates, averaged:
    (multiple samples taken of each with FRAPS’ built-in benchmarking utility)

    Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
    Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
    Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
    Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

    Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
    Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

    *Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
    *Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
    [*Game does not appear to be fully optimized currently, article with more detail here:
    http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


    Here are the PhysX tests, done with FluidMark:

    FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
    FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
    FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
    FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
    FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

    The Conclusion

    So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

    For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
    In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
    Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

    The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

    It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

    What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

    Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

    Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
    That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

    Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

    Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

    MINIMALIST RA HOUSE DESIGN BY BAQUERATTA

    The Minimalist RA House was designed a Tokyo company called Baqueratta.They have a good past in minimalist small residences.The entire house was furnished with modern and minimalist furniture.I love this house and I hope to have someone in future, but I especially like the bathroom.

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Quick Tip: The Sims 3 – Game Recording Is Slightly Darker Than The ‘Normal’ Colours Of Regular Gameplay [FIX]

    Just a Quick Tip for those of you recording The Sims 3 and finding that your videos are looking ‘darker’ than the original gameplay itself – a problem that has been around for some people for over a year now… It’s not that the game isn’t recordable (although for some people they got nothing but ‘blank/black screens’ a few years ago) it’s that the recordings are coming out, what looks like, a few shades darker than what the game really is.
    I was recently seeing a spike in the number of people talking about this problem again and decided to see if I could find a fix, or at least a workaround, for it; and what I found was something that everyone can do for now (at least until AMD/NVIDIA or Maxis/EA makes an update that fully fixes the issue) and that is simply: to run The Sims 3 in Windowed Mode.

    Whether you are using Dxtory, Bandicam, Afterburner or most other game recording programs (even NVIDIA’s Shadowplay has the same issue for some people), the fix [more of a workaround] that I found for now at least allows you to record your Sims 3 gameplay with proper colours, as you can see in these frames extracted from a couple of game recordings, below:

    Comparison between the display modes and the colours when recording (Darker vs. ‘Normal’) for the recording issue with The Sims 3, showing that the workaround works [at least for now] in two extracted frames from two game recordings (one in Windowed Mode and one in Fullscreen Mode). [In the right half, the camera has been ‘zoomed in’]

    Have fun recording your Sims 3 gameplay once again, if this problem has made you stop – and
    See You In The Games!

    My trip to Vietnam Cont….

    I finished the organization capacity assessment of the 5 local civil society organizations (NGOs) in Vietnam. They are all working or trying to work in a “rights” based approach. The main services of these local NGOs are focused towards marginalized groups, ethnic groups etc. However this is not what the Government wants; they prefer them to work on a needs based approach.

    They have therefore come up with a way to allow such organizations to work on a slightly different rights based approach. However this is a structured method which can be monitored by the Government. This is how it is set up:

    All international non governmental organizations (INGOs) have to be registered with the ministry of foreign affairs under “VUFO” – Vietnam Union of Friendship Organization. VUFO is the organization which deals with the administration of INGO policy and compliance as it were. Under VUFO they have what is known as the NGO Resource Center which deals with some operational issues as well as help set up working groups under thematic areas. (E.G: HIV AIDS, Gender, LGBT etc.)

    All/most (there can be exceptions) rights based local non governmental organizations are registered under “VUSTA” – Vietnam Union of Science & Technology. VUSTA is the organization which deals with the administration of local NGO policy, compliance and deals with the operational issues as well as help set up working groups for thematic areas.

    Both types of working groups in theory are independent; however they can have representatives from ministries, other government agencies, communist party advocacy committee etc. in addition to like minded NGOs and INGOs.

    Through these working groups research based policy alternatives (advocacy and lobby for rights based services & opportunities) are submitted to each relevant ministries. This is then passed on to the cabinet of ministers. Based on the agenda of the National Assembly cabinet may submit these policy alternatives to the assembly who may or may not approve, amend or adopt these policies. It sound quite easy but in practice this is a long process.

    Many organizations do not have long term resources to sustain this type of process. However based on authority levels at different levels/branches of the government some organizations are able to get the corporation of the government to deliver right based services themselves or through quasi government agencies.

    The “local NGO” in general is a relatively new phenomenon in Vietnam. They tend to be small and with low capacity. They have the potential to play a key role in delivering services to special interest groups and ethnic minorities in Vietnam. There are some clear examples where the government has allowed the use of this method effectively in isolated cases.

    There is a significant difference to how international & local NGOs operate in Vietnam, Lao, Cambodia, China, Mongolia & Myanmar. They have learned to operate within the service gaps of these socialistic countries and they are beginning to get noticed for the excellent work done, by their governments and civil society in general. However, they too face some of the most common issues such as resource mobilization, retention of staff, planning, budgeting, monitoring etc. faced by NGOs the world over.

    Now about Hanoi; it is indeed a busy city and one that is growing rapidly I really like visiting Hanoi and the friendliness of the people of Vietnam. I visited most of my favorite cafes and bars which I patronized on my previous travels to Hanoi. Everywhere you look you see construction sites (Except central Hanoi) these buildings are mixed developments like what you saw in Dubai several years ago. They are still to go in for developments such as Dubai Marina, Dubai International Financial District; I counted over 40 cranes on the drive from the airport to my hotel. They do not seem to be affected as much as the others in terms of the global financial crisis.

    Walking through the streets of Hanoi I noticed something unique to Vietnam (I think). Most of the Hanoi streets are dotted with Café’s and restaurants. With the vast majority of the Vietnamese using motorbikes for travel, each one of the establishments have something resembling a valet parking for those patrons arriving at the establishment in their motorbikes. The parking attendants use a white chalk to mark on the seat of the motorbike the number of bikes parked in the day / rider / owner / and parking sequence. When patrons leave the parking attendants starts moving the motorbikes closer to the entrance (perhaps for tips) and it is done on a continues basis. I was fascinated by this as my experience in other parts of the world is that they put up a huge sign saying that parking is at your own risk; and they are only interested in what you spend at the establishment and keen to get you out as soon as they can so that another patron can be served. Hope this continues in the future as well.

    I will be flying home tomorrow and will prepare for 3 more assignments which have simultaneous time lines. Organization Capacity Assessment of research & policy advice organization in South Asia, Organization Capacity Assessment of 5 local NGOs in Indonesia. Organization Capacity Assessment of 4 branch offices in the east of Sri Lanka.

    High-quality protein

    Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

    Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

    Diet Start

    Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

    What is Biological Value?

    In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

    The only whey to go

    To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

    ¨ It encourages the formation of lean muscle mass

    ¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

    ¨ It helps to build healthy new collagen

    ¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

    ¨ It is a quick and easy way of having a high-protein meal or snack

    ¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

    There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

    The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

    The Vital Acid—Alkaline Balance continue…

    Excess salt intake can also severely upset the body’s water balance. Along with potassium, which also occurs naturally in fresh foods, the sodium in foods and in salt itself (which is sodium chloride) plays an important part in the movement of electrons through the body’s water- based protoplasm. This is why sodium and potassium are known as electrolytes. Potassium tends to concentrate in the cells, sodium in the fluids outside the cells. The balance between sodium and potassium, when it is right, sets up a dynamic tension that makes it possible for the living cells to react quickly and efficiently to nerve stimuli, to exchange nutrients and wastes easily through the cell wall, and to maintain the proper interior and extracellular water balance. Too much sodium, which most of us get from eating salt, upsets this balance altogether and can cause troubles. It forces the body to hold on to extra amounts of water to make up for the extra salt one has eaten. Tissues become bloated, and this salt-caused edema can interfere with the blood’s oxygen transfer to cells as well as creating extra pressure against the blood vessel walls themselves. These are some of the reasons the Lifestyle Diet eliminates salt both in cooking and at the table. It relies instead on fresh and dried herbs, garlic, and spices for seasoning.

    Diet Start

    Throw out the Coffee

    Caffeine, a trimethylated xanthine, is found in coffee beans, tea leaves, cola nuts, and cacao, from which chocolate is made. Together with nicotine and alcohol, it makes up a trio of the most widely used psychoactive drugs in the world. The xanthines are stimulants to the central nervous system. They increase heartbeat rate, increase the volume and concentration of acid in the stomach, relax the smooth muscles in the body, raise blood lipids, stimulate the cerebral cortex (which means they heighten the intensity of mental processes), banishing drowsiness and feelings of fatigue. Caffeine and alcohol also have a diuretic effect on the system, causing frequent urination.

    The average cup of coffee contains between 100 and 150 milligrams of caffeine per cup, instant coffee somewhat less, tea between 60 and 75 milligrams, cola drinks between 50 and 60 milligrams. This means that if you are drinking four or five cups of coffee each day you are getting a dose of 700 to 750 milligrams of caffeine. To any pharmacologist a dose over 250 milligrams is considered large, although about a third of people in the West get twice as much each day and one person in ten actually imbibes more than 1,000 milligrams of the drug caffeine every twenty- four hours. The full long-term implications of drinking coffee (and, to a lesser degree, tea and cola drinks) are still not clear. However, enough is known already to inspire any woman concerned about the preservation of her health and beauty to give them up completely. For caffeine is a stimulus you do not need on a healthful low protein, low-fat diet high in unrefined carbohydrates.

    The link between caffeine intake and anxiety symptoms has been well established. Dr. John Greded, associate professor of psychiatry at theUniversity of Michigan, and his colleagues and others have reported that high caffeine consumers have statistically significant elevations in anxiety scores. The risk of developing peptic ulcers is also 1.4 times greater among coffee drinkers than among non-coffee drinkers. There is now evidence that coffee consumption by pregnant women can be dangerous to the unborn child Caffeine has been shown to cross the placental barrier where its mutagenic and perhaps even teratogenic potential may cause genetic changes and, therefore, birth defects.

    Finally, a daily intake of caffeine from coffee drinking is the same as continuing to supply your system with any other drug to which it has to adjust and which ultimately it has to detoxify and eliminate. One of the main principles of any long-term diet for health and beauty is, never add to the body anything which is not necessary and with which it has to deal. The fewer toxic substances there are, the less contribution they will make to tissue sludge, premature aging of skin, and the subclinical vitamin and mineral deficiencies which result in falling hair, breaking fingernails, chronic fatigue, and mental disorders. In the Lifestyle Diet, coffee, tea, cola drinks (even those without sugar), and cocoa are out. Instead, you can drink mineral waters, herb teas (but always in moderation since some of them in excess may not be good for you either), fresh fruit and vegetable juices, and coffee substitutes made from roots and grains.

    It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

    Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

    I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

    Check out AMD’s Video on their ReLive edition of Radeon here: 
    https://www.youtube.com/watch?v=nRSm12lwRe4

    [I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


    Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

    • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
    • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
    • Reboot
    • Install AMD Drivers via the Download from their Website
    • Reboot

    That’s it!

    After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


    Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

    I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

    * The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

    ** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

    DECORATING IDEAS FOR GIRLS BEDROOM GOOD

    True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

    DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM

    DECORATING IDEAS FOR GIRLS BEDROOM

    How I Decluttered my Inbox

    I try out new apps constantly, but it is rare that I find one that I consider a game-changer — one that revolutionizes how I do something and boosts my productivity.

    Meet Mailbox.

    Mailbox works with iOS mobile devices (iPhones, iPads) and GMail, and it can handle multiple GMail accounts. The idea is that your email box should always have ZERO messages in it, and it helps you achieve that goal by giving you four options for each message in your inbox.

    Big-swipe to the left: Add to list

    So many of the emails that I receive are ones that I don’t need to respond to immediately, and Mailbox understands that by allowing you to file messages as low-priority action items. It has three main lists:

    • To Read — great for newsletters and other items you’re interested in reading at some point but not necessarily the second that it arrives in your inbox
    • To Watch — my husband and some friends will sometimes send me YouTube videos that I can’t watch at work — not because they’re NSFW, but because YouTube is categorically blocked at my school. These videos also tend to be low-priority items.
    • To Do — emails of things to add to my “to do” list

    It also gives you the option of creating additional lists. I made the “To Buy” list, for example, for items like subscription services that are going to expire sometime soon that I need to renew or for wishlist items that I’m thinking about buying someday. 

    Short swipe to the left: Defer

    Sometimes I receive messages that I want to deal with, but not at the time I’ve received it. When I’m using my iPhone, for example, I rarely respond to email because I prefer typing on my laptop. Some emails are ones that I’ll look at more closely at night or over the weekend when I have more time. Other emails are ones that I want to deal with at a specific future time or date. Consider these examples:

    • a coupon for a clothing store that I might use but is only valid for a certain week in the future
    • a confirmation email for an upcoming trip or conference

    The beauty of the Mailbox app is that you can set the exact date and time when you want that message to reappear in your inbox by letting you “Pick Date.”

    The message will reappear in your inbox at the date/time you specify so it can get your attention rather than just getting pushed to the depths of your inbox to be forgotten.

    Short swipe to the right: Archive the message
    I might want to look for it someday, but it’s not something I need to act on.

    Long swipe to the right: Trash the message

    Mailbox is a free app in the iTunes store, and in the three weeks that I’ve had it, it has replaced the default Mail app on my iPhone and completely changed the way that I manage email. I’ve gone from having literally 1,000s of emails in my inbox to having ZERO. It’s the first time I’ve ever felt like I’ve been on top of my email situation.

    The iPad version just came out this week, and I’m using that a lot, too. It has a larger interface, but all of the same features. Here’s a screenshot of it on my iPad:

    You can see that I have one message in my inbox — a coupon that I have to use this weekend if I’m going to use it at all. I’ve deferred 14 messages — some that I’ll reply to on Tuesday, others that I want to deal with once I’m completely done with school on Thursday. I’ve got some lists, but I can also check the archive or the trash in case I accidentally swipe something into the wrong place and want to move it back out.

    If you click on a message in your inbox, an image of it will appear on the right so you can decide what to do with it. It’s a very easy-to-use and intuitive app, and now that I have it, I can’t imagine giving it up. It’s a huge asset to my productivity, and my only wish is that I could use this with other email platforms — like my school/work emails — that aren’t GMail accounts.

    Have you tried Mailbox yet? I’d love to hear about how you manage email productivity in the comments below.

    Hope you’re having a great Memorial Day weekend!

    Workout Anytime on FOX 19

    Workout Anytime on FOX 19

    Tony Petrocelli from Workout Anytime was recently featured on a segment on FOX 19 in Cincinnati. The segment is about what women do wrong while working out. Tony then talks about the locations and mentions that there are franchise opportunities.

    Cincinnati News, FOX19-WXIX TV

    You can view the full segment here.

    EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

    Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    Kaatsu aka Blood Flow Restriction Training

    Kaatsu training was developed in Japan five decades ago.  Ka means “additional” and atsu means “pressure.” An English layman’s term for the practice is “blood flow restriction training,” and involves performing strength training exercises while restricting blood flow to the extremity being worked.

    A significant benefit of the method is that you can use just 30 to 50 percent of the weight you’d normally use while still reaping maximum benefits of resistance training. You use less weight but do more — up to 20 or 30 repetitions versus 8 or 12 in most traditional strength training programs.
    Cuffs or bands are used that are just tight enough to allow arterial blood flow but not venous flow. This causes lactic acid and other waste products to build up, giving you the same benefit as heavy lifting without the dangers associated with heavy weights. For this reason, it’s a great strategy for the elderly and those who are recuperating from an injury.

    Scientists believe that restricting venous blood return can dramatically boost growth hormone secretion, reducing myostatin and inducing cell swelling.    Even better there is less overall tissue damage compared to traditional high intensity resistance training.

    History of Blood Flow Restriction Training

    The history of this type of training was detailed in an Outdoors Online Article (https://www.outsideonline.com/2023016/you-should-probably-try-japanese-blood-flow-routine):

    “Kaatsu came about in 1966 when 18-year-old [Dr.] Yoshiaki Sato, now a doctor, noticed the intense ache in his calves after having assumed the traditional Japanese sitting position during a typically long Buddhist ceremony. It was an ache much like the one he experienced after lifting weights — an ache he realized had to do [with] the occultation of blood circulation.
    Eureka! Using himself as a test subject, Sato spent the next several years perfecting a system of blood-flow moderation using bicycle tubes, ropes and straps. He later replaced the tubes with thin computer-controlled pneumatic bands. The idea was to apply pressure around the arms and legs while lifting a light load, safely impeding the flow of blood to exercising muscles.
    Slowing this flow engorges the limbs with blood, expanding capillaries, engaging muscle fibers and raising lactic acid concentration. But — and here’s part of what makes Kaatsu unique — it fools the brain into thinking it’s being put through a vigorous workout.”

    Kaatsu training can stimulate muscle growth and strength in about half the time, using about one-third of the weight, compared to regular resistance training.

    How does Kaatsu Work?

    The concept idea behind blood flow restriction training is to restrict blood flow in an exercising muscle/s using a band around the upper portion of the arm or leg being worked. This creates a metabolic disturbance that has local and systemic effects:

    1. A reduction in the partial pressure of oxygen and increase in the acidity of the muscle tissue stimulates protein synthesis through an adaptive response to the stressor.

    2. The central nervous system also senses the challenge and compensates by increasing sympathetic tone, heart rate, ventilation and sweating.   There is also an accentuated hormonal response as mentioned previously.

    Kaatsu also stimulates mTOR signaling and lowers myostatin (myostation stops muscle growth!)
    Unexpectedly muscle growth occurs both sides of the cuff even though blood flow is only restricted on the side farthest away from the heart.    The systemic increase in Growth Hormone also drives overall muscle growth.

    How much Pressure?

    It is important not to restrict blood flow too much, as this could lead to injury and fainting.
    The good news is that research shows that if you use common sense the risk of using too much pressure is easy to minimize.  Your limb should not be tingling, turning red, blue or purple, and you should not lose feeling and should be able to feel your pulse in the limb.
    For a great quick start guide to Kaatsu click here:  https://www.kaatsu-global.com/quick-start-guide-001/
    Kaatsu Training Protocol

    A typical training session uses three sets 0f 20 – 30 repetitions per set. use half or less of the weight you’d normally use. Rest between sets is short with typical rest time being 30 seconds.

    Could Kaatsu Cause Injury such as Deep Vein Thrombosis?

    Kaatsu is NOT the same as putting a tourniquet on and if you follow proper precautions is quite safe.    The key is that Kaatsu does NOT alter arterial blood flow as described previously.    It is important to use cuff’s designed specifically for this process.
    Contraindications for Kaatsu

    • Women who have had a mastectomy with or without radiation and/or an axillary node dissection should not use blood flow restriction training.
    • People in hemodialysis who have arterial venous fistulas. Avoid doing blood flow restriction on the affected limb
    • Pregnant women should not use Kaatsu training.

    Who needs to curb the carbs?

    It goes without saying that everyone should consider cutting out refined sugar and flour products, plus high levels of processed foods that are full of junk fats, as they are nutritionally redundant in the human body. You should also consider giving up caffeine and moderating your alcohol intake, particularly if you suffer from any of the symptoms of unstable blood sugar and insulin resistance.

    Many people are not even aware of the symptoms of eating too many refined and dense carbohydrates. They have become used to living in what I call ‘the discomfort zone’. They have forgotten what it is like to wake up full of energy, think it’s normal to feel bloated after meals and rely too heavily on stimulants such as coffee to get themselves through the day.

    Diet Start

    This sorry state of affairs becomes their normal state of being — it is no wonder that the symptoms of degenerative disease creep up on many people un-noticed. They are so used to living below their physical potential that they don’t recognise the signs until it is sometimes too late.

    If you are more genetically disposed to gain weight readily when exposed to an unhealthy diet and lifestyle then restricting the amount and type of carbohydrate foods that you eat may be the right choice for you. Such a diet regime may also suit you if you have developed insulin resistance as the result of a diet based on high levels of refined and complex carbohydrates that outweigh your energy requirements, plus too much saturated fat, with little fibre and water. Unless, that is, you are one of those people who leads an active lifestyle or has a high metabolic rate, and already eats a diet with relatively high levels of healthy complex carbohydrates (brown rice, potatoes, wholegrains and certain vegetables, fruit and pulses) without accompanying weight and health problems. If so, why are you reading this? Sounds like you are already doing what is right for your body.

    Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

    Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

    See You In The Game!


    [Update: As of July 20th, the Double XP Boost is now over… See you next time!]

    The Question of Alcohol in you Diet

    Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

    Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

    A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

    Diet Start

    Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

    Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

    Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

    These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

    These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

    And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

    As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
    For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

    The Short Version

    “Should I buy the 470 or the 480?”

    The answer, in-one-sentence, is:

    “Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

    ~ The Game Tips And More Blog’s Answer, In One Sentence™

    The Long Version

    Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

    Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

    “Should I buy the 470 or the 480?”

    The answer, in-one-sentence, is:

    “Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

    ~ The Game Tips And More Blog’s Answer, In One Sentence™

    The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

    As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

    Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

    This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

    List of Some Sources Researched (not including video benchmark sources):

    http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
    http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
    http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
    http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
    http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
    https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
    http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Starts Again Today! [Updated 2018-02-01 – Answer Image]

    It’s the 15th of the month – and it is time for something that I want to start up again (and not only because I have over 50,000 Screenshots burning a hole in my pocket, but mostly that) – something that I had going for a short time, three long years ago…

    The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having a ‘grand re-opening’ once again today – January 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    Correct answers submitted by the end of the month (beginning at the time of this posting) will be chosen from randomly, where one Skillful Identifier will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is a larger portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for this month’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-01):


    The Answer for this month’s Contest could have been: “Marvel Heroes” or “Marvel Heroes Omega” or “Marvel Heros” or “I can’t believe they cancelled this great game that I only just recently discovered existed especially with all the future Marvel movies coming out what happened this timeline sucks”. Click to see Full Size

    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Fifth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!


    (The Game Tips And More Blog Contest Game #2018-01)

    RELAXING BATHROOM MODERN DECORATION

    Relaxation can be achieved in a variety of ways. If the shape of the tub that makes the difference, decorative items or inspire the idea that you can see, these bathrooms all have something in common with relaxation. Some interiors are rich in green arrangements, which add freshness and energy of the place. He also tried to find some bathroom designs that have a special color.

    LUXURY RELAXING BATHROOM DESIGN

    LUXURY RELAXING BATHROOM DESIGN

    We realized that the wood has a great influence on modern decoration, the first picture, for example, because it adds authenticity and personality. The windows are also of great importance because they have a great influence on the aesthetics and atmosphere of a room. Diagonal windows give a dramatic touch and are welcome if there is a nearby slope. Most of the bathrooms in the following images are modern, but also you will find some classic elements that blend well with contemporary arrangements.

    LUXURY RELAXING BATHROOM LUXURY DESIGN

    RELAXING BATHROOM LUXURY DESIGN

    LUXURY RELAXING BATHROOM DESIGN

    LUXURY RELAXING BATHROOM DESIGN

    LUXURY RELAXING BATHROOM GREEN DESIGN

    LUXURY RELAXING BATHROOM GREEN DESIGN

    LUXURY RELAXING BATHROOM STYLE

    LUXURY RELAXING BATHROOM STYLE

    SWIMMING POOL DESIGN IDEAS GERRR……

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    Here are some tips on how to keep your energy bill is lower and save valuable resources of the Earth at the same time.

    * Heating your swimming pool: Depending on where you live and heat that is during the spring months and summer, you may not need to heat your pool as often as you think. The houses are in hot desert climates and do not need to heat the pool at night or when he decided to entertain. By heating the water, taking into account alternative methods of heating used to heat water. Energy from solar panels on your home is an excellent way to harness the sun’s energy to heat your pool.

    * Cleaning the Pool: Many use automated equipment, which operate in the pool when the pool is empty. While helping to keep the pool clean when you’re in, but also the use of electricity 24 hours a day. Try to reduce the frequency to an automatic cleaning to be used. Also choose to use less chlorine, and to consider alternatives such as cleaners, detergents, ozone. Keep the cover over the pool when not in use also helps keep the debris in the air cleaner, leaves and twigs.

    * Keep all plastic and vinyl toys away from the game: Even if I do not believe that the maintenance of the environment around the pool with pool toys the child is also important. Many pool toys are made of vinyl or PVC, also known as polyvinyl chloride. These types of toys, release toxins and chemicals hazardous off-gas. Try to select the pool toys that are made from natural organic materials and the safety of your children, and help keep the pool a greener place to play in.

    * Use other sources of water in your pool: In your geographic area, using other methods to collect water in your home into account. Options could include rainwater that can be used to fill your pool, and the plumbing in your home for showers, baths, basin and toilet. This measure can help you reduce your water bill and conserve water on Earth. For many municipalities, geographic, you can earn additional benefits by LEED, or the benefits of saving tax on income tax time. Greywater reuse for your home is a viable option for many homeowners.

    Owning a pool should be an enjoyable experience, after all, you deserve to relax and entertain in the warmer months of the year. Despite owning a pool should not be at the expense of its portfolio, the precious resources of the Earth or the health of your family. Follow these tips to green the pool and enjoy all the benefits of reading and resting in the sun.

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

    Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

    Example of ‘the screen shake effect’ I made, in GIF format
    (Click to see slightly larger Full Size)

    I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


    Spells with Screen Shake
    Zagara – Nydus Network (R)
    Genji – Swift Strike (E)
    Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
    Gazlowe – Deth Lazor (W)
    Lucio – Soundwave (Q), Sound Barrier (R)
    Valeera – Blade Flurry (W)
    Zul’jin – Twin Cleave (W), Guillotine (R)
    Ragnaros – Sulfuras Smash (R)
    Alarak – Lightning Surge (E)
    Cho – Upheaval (R)
    Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
    Anub’arak – Burrow Charge (E) (Upon resurface)
    Li Li – Water Dragon (R)
    Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
    E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
    Falstad – Hinterland Blast (R)
    Kerrigan – Impaling Blades (W)
    Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
    Sonya – Ancient Spear (Q) (On Hit), Leap (R)
    Stitches – Slam (W)
    Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
    Uther – Hammer of Justic (E), Divine Storm (R)





    Heroes with No Screen Shake
    Valla
    Tyrande
    Lunara
    Kael’thas
    Zeratul
    Cassia
    Probius
    Varian
    Samuro
    Zarya
    Auriel
    Gul’dan
    Medivh
    Chromie
    Tracer
    Dehaka
    Xul
    Li-Ming
    Greymane
    Gall
    Artanis
    Lt. Morales
    Rexxar
    Leoric
    The Butcher
    Johanna
    Sylvanas
    The Lost Vikings
    Thrall
    Jaina
    Azmodan
    Chen
    Rehgar
    Murky
    Brightwing
    Tychus
    Abathur
    Arthas
    Illidan
    Malfurion
    Nazeebo
    Nova
    Raynor
    Tassadar

    I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

    I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

    So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



    Just letting Sufferers know: It’s Not Just You™!
    [I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

    Teenager’s Room Artist Theme

    Teenager’s Room Artist Theme

    Teenager’s Room Artist Theme

    Men’s Body Click Diet part 3

    What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

    Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

    I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

    Diet Start

    The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

    I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

    I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

    I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

    But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

    Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

    It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

    Kneeling High to Low Chop – The Best Core Exercise You are Not Doing!

    Core stability is a big buzzword in fitness, and for very good reason.     The ability to keep the core stable is essential for proper movement and prevention of injury.      Stability has three aspects related to the planes of movement:
    Sagittal Plane Stability– is the ability to prevent flexion and extension of the core from the low back to the top of the head.
    Front Plane Stability– is the ability to prevent lateral flexion of the core from the top of the head to the low back.
    Transverse Plan Stability – is the ability to prevent rotation of the core from the top of the head to the low back
    Stability is about preventing movement – not creating movement!   All muscles can act as stabilizers, movers, or absorbers, but the muscles of the core spend a lot of time preventing movement in many activities from running to walking to jumping.    This is why exercises like the plank are considered functional because the plank is about using core muscles to prevent movement of the core as opposed to exercises like a crunch which is about creating movement.
    To have a strong and stable core it is important to perform stability exercises in all three planes of movement.     The plank and side plank do a great job of challenging muscles to prevent movement in the sagittal and front planes, but that leaves the Transverse Plane.    This is significant because the vast majority of injuries occur in the Transverse Plane with Frontal Plane injuries close behind.
    It is also important to note that rotational movement (movement in the transverse plane) is fundamental to human movement in general and the generation of explosive force in many activities from Golf to Tennis to Boxing.
    One of the best ways to develop rotational stability in the Transverse Plane is doing high to low anti-rotation chops in a half kneeling position using either resistance bands or cable resistance with a rope handle or pole attached.
    Execution

    The anchor point of the resistance band/location of the cable handle should be position up high.     Your body should be facing perpendicular to a line from the handle/anchor point straight down and across your body.     You should be in a half kneeling posture down on one knee (the leg closest to the cable/band should flexed with foot flat on the floor and hip and knee bent at 90 degrees.   
    The other knee should be down on the floor (use a cushion or mat!) with shin and top of foot along the ground directly behind the knee.   It is important that the knee is directly under the hip.  It is also important that the spine be held straight with a straight line from top of head through the spine and hip to the knee on the ground.    Extend the spine fully and keep your spine fully elongated throughout the exercise.
    Reach across the body and place both hands on the resistance band/rope spread apart with hands shoulder width apart.gripping the band/rope.
    Keeping the shoulders and hips facing forward the entire time pull the rope/band directly down and across the body and pause in the bottom position making sure there is no movement to in the shoulders or hips while maintaining a fully lengthened spine.   Then slowly return to the starting position.    Form is VERY important in this exercise.
    Here are two great instructional videos:
    http://www.stack.com/video/3730538400001/elite-performance-with-mike-boyle-increase-core-strength-with-anti-rotation-exercises

    http://www.muscleandfitness.com/workouts/abs-and-core-exercises/videos/half-kneeling-stability-chop

    Teenager’s Room Rockstar Design For Real RockStar

    Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

    Teenager’s Room Rockstar or Musician Themed

    Teenager’s Room Rockstar or Musician Themed

    Teenager’s Room Rockstar Design For Real RockStar

    Teenager’s Room Rockstar Design For Real RockStar

    Teenager’s Room Rockstar or Musician Design

    Teenager’s Room Rockstar or Musician Design

    My Trip to Vietnam

    I am on my way to Vietnam for an organization capacity assessment of a multilateral organizations’ branch office as well as their partners. I had few tense moments in getting my visa on time but everything worked out. This will be my third trip to Vietnam; my first trip was back in 2005, my second trip was in 2007.

    The first trip was to train the senior management of the largest ministry in Vietnam on Sector Wide Strategic Planning. I recall that my liaison officer was very hospitable and took me around Hanoi every night. I had to sample the snails, frog, cat and dog in a variety of restaurants, washed down with copious amounts of snake wine. It was one of the most memorable assignments for me and I made a lot of friends there.

    My second assignment in Vietnam was to train and conduct an organization capacity assessment along with the senior management of a ministry in PDR Lao. As a perk to the staff the training was moved from Vientiane, Lao to Hanoi, Vietnam.

    Doing a Strategic Plan / Organization Assessment in a communist country is quite different. There is no Institutional landscape for you to influence or lobby. There is the communist party line and laws and statues based on them; everyone has to live within these boundaries. Influencing and lobbying can be considered political subversion and it is not practiced by organizations. Even when dealing with the private sector you and your competitors have to live and operate within these bounds. It can be argued that this is indeed a very controlled level playing field.

    I am looking forward to doing this assignment.

    Georgia Bloggers Meet-up

    I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

    This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

    So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

    The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

    We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

    I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

    Jayne, Kelly, Angie, Stacy, Tara, Valerie

    PhotobucketThe Teacher Wife

    Funky Fresh Firsties

    ...And They All Fall Down...

    Georgia Grown Kiddo's

    Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


     
     

    Michelin, Jessica, Greg, Erin, Alison

     

    Happy New Year from The Game Tips And More Blog! [NewYears’ Greetings 2017]

    “Happy New Year 2017 Greetings”
    by The Game Tips And More Blog
    (Just Cause 3 capture, Highest Settings and FXAA, with Text and Effects added)

    I personally wish you all much better things in 2017!

    [To help celebrate the end of a crazy 2016 (for almost everybody, it seems) and the beginning of a hopefully-better 2017, this was simply a fireworks celebration captured in Just Cause 3 (Highest Settings, FXAA). I then added a ‘crowd’ overlay that had a bit of ‘glitter’ effects in it (used with License from CyberLink’s PowerDirector 12) and put some Just Cause 3 – styled text  on top of it all (using a free font called “Dirty Old Town” which looked somewhat like the JC3 font and another one whose name escapes me at the moment). Lastly, I put a “Text FX” Overlay effect to show the year, an effect that was also in PowerDirector 12. As always, it was seemingly simple to think of, but took longer than expected to complete the composition (almost a day late for NewYear’s, heh). 
    HAPPY NEW YEAR ! ]

    Game Material by Avalanche Game Studios (avalanchestudios.com) and Square Enix (square-enix.com)
    Captured and Edited by Troy from The Game Tips And More Blog

    Guided Math Resources

    I recently went to a workshop about guided math groups, and I have tons of new ideas that I’ll be sharing in the coming weeks. I couldn’t wait, however, to share a couple of the resources that I’m really excited about.

    First, is this book:

    Good Questions: Great Ways to Differentiate Mathematics Instruction, Second Edition  is a resource that I was able to start using with my students as soon as I got it. It is full of open-ended questions and parallel tasks that students at any level could access. It’s organized both by grade levels (K-2, 3-5, 6-8) and domain strands (Number and Operations, Geometry, Measurement, Algebra, and Data Analysis and Probability). It also lists which Common Core State Standards each question aligns to.

    We were working on line plots (4.MD.4) when the book first arrived. Consider these problems:

    You create a line plot that is based on measuring items to the nearest quarter of an inch. You notice that your plot looks a lot like a steep mountain. What might the measurements be and what might you be measuring? Why does it make sense that your plot would look like a steep mountain? (p. 174)

    We had a great class discussion about inferences we can make about data based on the shape of a line plot, and students were really creative about what the line plot could be measuring.

    There was also a parallel task where students could choose how to represent the data.

    The set of data below describes the ages of a group of people at a family party.

    32, 30, 5, 2, 1, 62, 58, 28, 26, 25, 24, 2, 4, 39, 16. 

    Choice 1: Create a line plot to display the data. 

    Choice 2: Create a bar graph to display the data. (p. 186)

    Some students felt more comfortable with bar graphs, but they realized that it was harder to figure out intervals and scales for the bar graph vs. a line plot. That yielded a great discussion about how to choose which type of graph to use.

    This is a great resource to use for student math journals, and it’s one that I will be going to daily. I can’t recommend this resource enough.

    Another math resource that I’m falling in love with for my math workshop and guided math groups comes from the Bridges in Mathematics program. Until attending the workshop, I’d never even heard of this program, but it seems like it’s well-suited for developing math centers and guided math groups. There are some sample tasks available as a free supplement to the the program (to align it with Common Core) at http://catalog.mathlearningcenter.org/free. I’m also planning to purchase their Building Computational Fluency program for $45. I need something more structured and organized for checking students’ multiplication and division fluency in the fall.

    Do any of you use the Bridges in Mathematics program in your school? If so, I’d love to hear more about it — I’m really intrigued!

    Have a great weekend!

    The Incredible Pistol Squat

    The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
    Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
    Pistol Squat Progressions
    There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
    For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
    Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
    The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

    Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

    Franchisee Profile: Bill and Bob Aicklen

    Franchisee Profile: Bill and Bob Aicklen

    Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

    Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

    In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

    The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
    How did you learn about Workout Anytime? 
    We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
    Why did you choose an opportunity with Workout Anytime? 
    From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
    How has business been since joining the brand? 
    We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
    Are you involved in any charities or community outreach?
    We localize our charity work depending on the club, and we usually donate free memberships for silent 
    auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

    Knoxville News Sentinel featuring Kurt and April Nitzsche

    Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
    The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
    April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
    You can view the online article here. 

    Low-carb lifestyle guidelines

    By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

    The general principles

    Cut out all unhealthy refined carbohydrates.

    • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
    • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
    • Eat more high-quality protein — organic if at all possible.
    • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
    • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
    • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

    Diet Start

    DIETARY MYTHS

    Myth: skipping meals is a good way to lose weight.

    Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

    Myth: eating after 8 pm causes weight gain

    Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

    Are you all fired up?

    You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

    Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

    The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

    DIETARY MYTH

    Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

    WORKOUT ANYTIME in Club Industry

    WORKOUT ANYTIME in Club Industry

    In an article titled, “Reaching Landmark 50 Gyms Open, Workout Anytime Prepares for Rapid Acceleration in 2014” features WORKOUT ANYTIME’s 50th club opening. Along with opening their 50th location WORKOUT ANYTIME is looking at rapid growth acceleration through the 2014 year. WORKOUT ANYTIME’s CEO and co-founder Steve Strickland outlines a few important development metric’s of the year such as in 2013 WORKOUT ANYTIME doubled in locations.
    You can view the full article here. 

    Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

    I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

    Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

    Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
    (Reduced size, framerate and quality, to fit Upload requirements at Steam)
    Click to see slightly larger Full Size
    On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

    To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
    You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
    [Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

    If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

    While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

    For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

    The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

    Try it out on your next Character perhaps – and have fun in Fallout 4!

    The link between carbohydrates and insulin resistance

    The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

    However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

    Diet Start

    Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

    The only people who are benefiting from refined foods are:

    • The dentists who have to patch up your decaying teeth
    • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
    • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

    Is it enough just to cut out refined carbohydrates?

    Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

    The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

    The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

    Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

    WORKOUT ANYTIME in the Jacksonville Daily Record

    WORKOUT ANYTIME in the Jacksonville Daily Record

    WORKOUT ANYTIME was recently featured in the Jacksonville Daily Record. The article talks about the new WORKOUT ANYTIME that opened up Monday, October 6. The article talks about how the Levitt family looks to open 15 WORKOUT ANYTIME locations in the next 5 years in the Jacksonville area. 
    View the full article here. 

    Chronic Illnesses and Diet part 1

    Chronic illnesses are frequently the result of a web of interrelated factors. Your body may be reacting to a germ, an allergen or a toxin or you may be deficient in a vital nutrient. And the whole situation may be complicated by insulin resistance. It’s unrealistic to think that finding and treating just one piece of the puzzle will be sufficient to remedy the problem. Restoring balance is a more realistic approach.

    Balance and Health

    Balance is a key concept in most alternative medical approaches to health, such as traditional Chinese medicine, naturopathy, homeopathy and Ayurveda. One of the problems that mainstream medicine has with these alternative medical systems is that the practitioners appear to offer the same remedy for all sorts of illnesses. This doesn’t seem right to doctors trained to think that there are a certain number of discrete diseases that exist in nature. Physicians have also been taught that for each disease there is a distinct treatment. We know, for example, that if you have a strep throat or pneumonia a particular antibiotic is the right treatment, while another antibiotic is appropriate for your urinary tract infection because a different germ is involved. If you burn your finger or you break your arm, the treatment is again going to be designed for the specific problem that you have.

    Diet Start

    There is certainly some truth to the idea that specific illnesses or conditions need precise, individualized treatments. But there is another valid argument to be made as we move away from acute ailments to focus on the increasing prevalence of chronic illnesses. Sometimes the symptoms of a chronic illness can be suppressed with drugs, but since the cause of the disease is unknown, an individualized remedy to cure the person is out of the question. When an alternative medical practitioner recommends a generalized strategy that is not necessarily aimed at the distinct disease but is more directed at correcting imbalance, these approaches are designed to get to the underlying causes rather than the individual symptoms.

    If you are in pain, it’s hard to believe in a treatment unless it works right away. Dietary changes and other generalized strategies, like the Body Clock Prescription, usually do not produce instant relief. These measures do sometimes take effect quickly, but it’s frequently a slower process. I think you will be more motivated if you understand what lies behind much chronic illness.

    Rhythmic Disturbances May Underlie Many Chronic Illness

    As researchers continue to elucidate the mysteries of the scientific basis of disease, we realize more and more that similar fundamental mechanisms underlie much chronic illness. These include abnormalities of cell membranes and their capacity to send and receive messages, the backfiring of chemistry designed for cellular defense (autoimmunity and inflammation) and ‘sparks’ from your own metabolic fire, environmental radiation and chemical pollutants (oxidative damage). This is why a generalized strategy to treat chronic illness is beneficial.

    To this list I would add dyschronism or the failure to keep the various cadences of the body’s biochemical activities in harmony. Disharmony is the direct cause of jet lag, symptoms related to shift work and some sleep disturbances. But having your body in disharmony is also likely to bring out the worst in you more readily than if your body is well tuned. Poor tuning contributes indirectly to the expression of other illnesses, as indicated by the tendency for many ailments to have their own characteristic time peak of maximum intensity. There is evidence to support the idea that there is a rhythmic component in a number of diseases; among the most significant findings related to dyschronism are the following:

    Seasonal affective disorder is a form of depression directly linked to the shorter daylight hours of winter.

    Sudden cardiac death and nonfatal heart attacks occur most frequently between 7:00 and 11:00 a.m.

    Strokes occur more frequently between 6:00 a.m. and noon.

    Asthma sufferers experience their worst symptoms in the early morning hours.

    The growth of breast cancer cells may be inhibited by melatonin. (When a 1995 study showed that Finnish flight attendants had an increased risk of breast cancer, the principal investigator hypothesized that frequently crossing time zones was part of the problem, since jet lag interferes with the normal production of melatonin. Although his theory has not yet been proven, other studies have shown that melatonin inhibits the growth of breast cancer cells.)

    Circadian rhythms have been substantiated in the symptoms of rheumatoid arthritis (least pain and stiffness around 5 p.m.) and allergic rhinitis (peak of worst symptoms between 5:00 and 7:00 a.m.).

    Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

    Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

    Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

    See You In The Games!

    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

    Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

    The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
    NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

    Deals And Sales – ‘Things Goin’ On This Weekend’ (Weekend of August 11th, 2017) [Notification]

    Just a quick Notification of some things going on… Once in a while, I try to post about Sales going on somewhere – especially the ‘big’ ones, like Summer’s End or Christmas Sales. This weekend, there are a few ‘Free Weekends’ and Sales going on (that I saw so far) and thought I wanted to share them, just in case there were others interested in these games, heh. Here’s what I saw is Goin’ On This Weekend:


    Guild Wars 2 Expansion (Path Of Fire) is Free To Try all weekend:

    https://www.guildwars2.com/en/news/get-ready-for-the-guild-wars-2-path-of-fire-preview-weekend/

    GOG.com (formerly Good Old Games) is having a couple of Sales on games which include series like Master Of Orion, Warhammer 40K, Painkiller, Delta Force, Red Faction and at the same time having a sale on Strategy Games like Codename Panzers, Men of War, Hybrid Wars, Total Annihilation, Empire Earth, and more:

    https://www.gog.com/promo/20170807_weekly_sale
    and
    https://www.gog.com/promo/20170811_special_promo_strategy_sale

    Some other games, which are Free To Try all weekend via Steam, are:

    For Honor, the medieval swordplay/battle game is Free To Try all weekend and selling for half-price
    (for those that remember Die By The Sword, it looks like it may be similar to that, but in an ‘arena’ setting [sorry, but I haven’t been able to try it yet]):

    http://store.steampowered.com/app/304390/FOR_HONOR/

    Saints Row IV, from the crazy “each game is increasingly like GTA-on-drugs” open-world/action
    series, is Free To Try all weekend and selling at a reduced price
    [I haven’t tried it yet, but I am still playing the wacky Saints Row III once in a while and still getting a kick out of it]:

    http://store.steampowered.com/app/206420/Saints_Row_IV/

    Sorry I didn’t get to finishing this sooner, but the weekend isn’t over yet! Get out there and try these games out or grab something you want on sale – and maybe See You In The Game!

    Edit:

    I completely forgot one more I was going to post in here! 

    GamersGate also has some games on Sale right now, including Borderlands (for five bucks!), the Mafia series, Bioshock series, Xcom series, and more:

    https://www.gamersgate.com/offers

    [Note: I am not affiliated with these game sites, nor do I receive any compensation for mentioning them here (the Links do not have any ‘affiliate tags’ or similar additions to them) – I am merely an enthusiastic gamer and like to share deals and other goings-on with other gamers like me. Enjoy!]

    It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

    Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

    Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

    I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

    I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

    So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

    I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

    I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

    I know this was a Text-Only post, but I took this screenie of the Driver
    Version (so I would remember it) and didn’t want to waste it

    I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


    Update 2017-06-19:
    For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
    I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

    Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
    Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
    I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

    Trip to Hyderabad Cont……

    Today I am leaving to Hyderabad for the assignment. Funny, there seems to be a lot of things that we do when doing an overseas consulting assignment but don’t really talk about it. The stuff we do for preparation has two parts

    Things considered as part of consulting process
    Marketing, prospecting and selling
    Proposal, budget & contract
    Invoicing and receiving advance payment
    Preparation / Intake

    Things that are part of the consulting process but gets taken for granted
    Requesting Invitation Letter to process visa
    Applying for visa
    Travel & Medical Insurance
    Foreign Exchange
    Transport to and from Airport – in your country and the country you are visiting
    Travel advice regarding security, weather etc

    I addition it is up to the consultant to find out about interesting things in the city s/he visits. In my experience some assignments will give you a bit of time in the evenings and it can be boring to be stuck in a hotel all the time. Suggest the web or lonely planet for this.

    Also rule of thumb is exchange a bit of money at the airport itself. Trust me you will spend more time and money in trying to look for better exchange rates.

    The Easiest Way to Implement a Classroom Economy

    As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

    My Classroom Economy

    I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

    I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

    I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
    Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
    The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
    1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


    2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


    3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

    And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

    I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

    For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

    Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

    If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

    Join the Mailing List! 

    Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
    Have a great week!

    good representation of the concepts

    INSPIRING DESIGN DETAILS LOOKOUT HOUSE

    Inspiring Design Details

    Inspiring Design Details

    The project is located atop a hill in Fairfield County, Connecticut, and has stunning views of distant Long Island. Depending on the shape of the original designers of the pyramid house, centered on the height of an open plan double lounge around an indoor pool, has been simplified and facilitated through a range of modern materials (including bamboo, stone blue tiles and glass) and a new lighting program. A glass bridge “architecture synapse“, which clearly distinguishes old from new connects the main house for the master suite.

    As the original structure, the new suite contains a large volume a little, in this case, a cube on foot, finished Claro walnut that divides the rest areas and bathrooms. billiard room “in the first photo is the most spectacular part of the house, offering an ideal place for socializing and relaxation. And as you can below, a resident has another pot, this time integrated nature

    Inspiring Design Details Rest Room

    Inspiring Design Details Rest Room

    Inspiring Design Details Dining Room

    Inspiring Design Details Dining Room

    Inspiring Design Details Kitchen

    Inspiring Design Details Kitchen

    Inspiring Design Details Bedroom

    Inspiring Design Details Bedroom

    speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

    Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

    http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

    End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

    Modern Side Table Lamps Design

    If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

    If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
    Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

    Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
    Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
    Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

    Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


    Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
    Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

    A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

    “We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

    The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

    On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

    • Go to Raptr.com
    • Sign in to your Raptr account
    • Click to get your gameplay data

    If you have any other questions, please send us feedback.

    We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

    Dennis “Thresh” Fong
    Co-founder and CEO”


    Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

    The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
    (Click to see Full Size)

    At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

    The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
    (from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

    Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

    The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
    (Click to see Full Size)

    There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

    Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
    (Click to see Full Size)

    As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

    The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
    (Click to see Full Size)

    While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

    Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
    (Click to see Full Size)

    Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

    Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
    (Click to see Full Size)

    Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

    July Currently

    How did it get to be July already?!?!

    I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

    Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

    Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

    Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

    Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

    Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

    4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

    On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

    I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

    Have a great weekend!

    Speedrun – Hitman: Absolution – Contracts (The First Hit)

    After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

    Level: Hitman (Absolution) – Contracts (The First Hit)
    Time: 21 seconds
    Score: 95,186
    Runs: About 4-5

    After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

    Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

    Good luck with it and See You In The Games!

    Workout Anytime in Citizen Tribune

    Workout Anytime in Citizen Tribune

    WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
    You can view the full article here. 

    Beautiful Bed Room Design Sample

    Beautiful Bed Room DesignBeautiful Bed Room Design

    Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


    Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


    The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

    WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

    WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

    Mercy Health’s new hospital could be economic boon to township
    By: Kurt Backschneider

    GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

    Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

    Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

    (Read More)

    How to Overcome a Negative Habit



    Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
    At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
    Three Parts of a Habit
    The Cue: a situational trigger that is based on a reward you are seeking.
    The Routine:  a physical or emotional action you take to obtain the reward.
    The Reward:  the satisfaction you get by following the habit.

    The Steps to Changing a Habit
    Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
    Understand Cravings and Rewards

    The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
    Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
    Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
    The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
    As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
    By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
    Determine the Specific Cue for the Habit

    This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
    Where are you when the urge for a reward hits you?
    What time is it?
    What is your emotional state?
    Who else is present?
    What did you do right before you had the urge?
    Have a Plan!
    Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
    Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

    Tune Into Technology Linky: Integrating Technology into Reading

    I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

    1. Let kids annotate their reading with GoodReader.



    I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

    2. Share favorite books on KidBlog.

    My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

    3. Create Book Trailers in iMovie.

    Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

    4. Create book clubs and discussion groups on Edmodo.

    We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

    5. Use Evernote and GoodReader to assess reading.



    I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

    How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

    And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

    Giveaway Winner!

    I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

    I went to the Random Number Generator this morning, and drumroll…

    I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

    And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

    Have a great weekend!

    Long Bean Benefits For Health

    LONG BEANS BENEFITS FOR HEALTH

    Long Beans Benefits For Health Long Beans are vegetables that very often we encounter in everyday dishes. Whether it’s for home cooking and restaurant cooking. There are also cook it in a way sauteed, but some are making to raw vegetables.
    But despite the long beans so popular for the food, I’m sure not everyone knows about the nutritional value as well as the nutrients found in these vegetables. In fact, long beans have vitamins and minerals also are quite high which is also beneficial to health.
    Long Bean Benefits For Health
    So, to increase your knowledge about health, here we present an overview of the nutritional content of beans as well as health benefits.
    Nutrient Long Bean
    Long beans contain a variety of essential nutrients for your body, including:
    As a Source of Protein
    With a protein content that is at least 8.3 grams per 100 grams chickpea stew, the bean vegetable vegetables long become a source of vegetable protein in our body needs protein for every day.
    Vitamin B Complex
    In every 100 grams of beans boiled which contains 146 mcg of folate (37% requirement), 0.2 mg of thiamin (14% requirement); 0.1 mg vitamin B6 (5% requirement); and 0.1 mg of riboflavin (4% needs); 0.4 mg of pantothenic acid (4% requirement); serta0,6 mg niacin (3% requirement). Various vitamin B complex contained in the long bean is an essential nutrient for our bodies.
    In general, vitamin B complex plays an important role in energy production and nerve function in our body, so vitamin B deficiency is usually characterized by fatigue and lack of energy.
    Contain High Fiber
    Long beans are vegetables that are rich in fiber. In every 100 grams of beans boiled, no fiber content up to 4 grams and meet 15% of our daily fiber needs. Fibers on long beans are available in the form of pectin, which is a soluble fiber, to very good in helping keep blood sugar at normal levels, as well as for normal fat metabolism.
    Mineral content of Long Bean
    Long Beans are also rich in various minerals, among others :
    Containing Calcium
    In Every 100 grams of beans boiled which contains 42 mg of calcium (4% requirement). Calcium is an essential mineral for the formation of bones and teeth healthy and strong as well, also for nerve and muscle function optimally.
    Containing Iron
    In Every 100 grams of beans boiled which contains 2.6 mg of iron (15% requirement). Iron is an essential component for the formation of enzymes for a variety of chemical reactions in the body, and forming the main component of red blood cells and cells
    muscle.
    Contains Magnesium
    In Every 100 grams of beans boiled which contains 98 mg of magnesium (25% requirement), where the mineral content is very important for healthy bones and teeth, muscle and nerve function, as well as the activity of enzymes in the body.
    Long Bean Benefits For Health
    Containing Manganese
    In Every 100 grams of boiled string beans also contain 0.5 mg of manganese (24% requirement). Manganese is essential for enzyme activity, and also for the metabolism of carbohydrates and joint health.
    Containing Phosphorus
    In Every 100 grams of beans boiled which contains 181 mg of phosphorus (18% requirement), which is also important in energy production and the formation of bones and teeth.
    Containing Copper
    In Every 100 grams of beans boiled which contains 0.2 mg of copper (11%). Copper is important for skin health, it also increases the body’s resistance to stress and disease.
    Containing Potassium
    In Every 100 grams of beans boiled which contains 315 mg of potassium (9% requirement), which is important for nerve function and also our muscles.
    Containing Zinc
    In Every 100 grams of boiled string beans also contain 1.1 mg of zinc and zinc (7% requirement). Zinc is a component of enzymes involved in the formation of red blood cells and bone.
    Containing Selenium
    In Every 100 grams of boiled string beans also contain 2.8 mcg selenium (4% requirement), where selenium is an essential mineral in the synthesis of the enzyme, which also acts as an antioxidant against free radicals in our bodies.

    Well, that’s what some of the vitamins and minerals contained in the beans. For you who like to consume either in the form of beans and vegetables stir fry, continue the positive trend.

    a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

    http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

    Are You Ready for NaNoWriMo?

    I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

    Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

    The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

    In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

    In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

    Who’s in?

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

    TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

    And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

    Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

    I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

    Now on Instagram!

    I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


    I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

    Have a great weekend!

    No Backtracking

    No Backtracking principles

    This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

    • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
    • Break totally with bad habits made in the past
    • Never return to yo-yo dieting
    • Find a healthy attitude to food and a viable eating plan for the rest of your life.

    No Backtracking rules

    During this phase you need to:

    • Increase your daily carb intake by no more than 10g (1/3oz) each week
    • Add new foods one at a time
    • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

    Diet Start

    • Drop back to the next-lowest level of carbohydrate intake if you gain weight
    • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
    • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

    Make this diet the one that works

    Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

    If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

    Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

    A template for life

    Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

    • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
    • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
    • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
    • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
    • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
    • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

    Blog Hunting

    Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


    In my mind, this is a battle between BlogLovin’ and Feedly.

    BlogLovin’

    I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
    What I like
    As a blogger, there are a few features that I really like about BlogLovin’. 
    1. Notifications and Blog Finding
    I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
    2. Viewing actual blogs
    Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
    What I dislike
    1. Too many clicks
    It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
    2. It’s still buggy
    I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

    Feedly

    Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
    What I like
    1. Better app integration
    There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
    Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
    Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
    IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
    Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

    2. Easy navigation
    There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

    3. Marking articles
    I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

    What I dislike
    1. Somethings get lost in translation
    Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

    2. Commenting is more complicated
    I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

    And the winner is…Feedly, mostly

    At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
    I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
    Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

    Paperless Mission #8: Conduct and Archive Running Records (iPad)

    This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #8: Conduct and Archive Running Records 

    At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

    Paperless rocks. The nightmare is over.

    In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

    Step 1. Download all of the running records to a folder on Dropbox.

    You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

    Step 2. Import the guided reading assessments into your GoodReader app.

    Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

    Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

    The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

    Step 4. Use the annotation tools to mark up student reading as you normally would. 

    I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

    Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

    To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

    Step 6. Move the renamed running record over to the student’s notebook in Evernote.

    To get there, go into Manage Files again, and then select Open in. . . 

    You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

    Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

    Extra Credit: Create a simultaneous audio file in Evernote.

    This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

    In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

    Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

    Thanks for reading!

    Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

    Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

    Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

    Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
    Recorded with:  Bandicam (Registered Version) @ 1080p
    Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

    This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
    [On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

    I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

    At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

    See you in the games!

    1923 Buick Roadster with a cool spare tire lock and tool kit

    Marathon Training Tips

    As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
    Determining Starting Point

    The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
    If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
    If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
    Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
    So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
    In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
    Training Mix

    Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
    It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
    There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

    Strength and Mobility Training

    Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
                A specific dynamic warm-up and foam rolling for areas of tightness and pain
    Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
    Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
    Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
    Strength Training Exercises for Running
    It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
    It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
    Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
    Putting it all together

    If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

    Getting Started with a Flipped Classroom

    Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

    1. Plan your lessons 

    a) Does it make sense to flip?
    You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

    b) What content must be covered?
    I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

    c) Am I the best person to deliver the content?
    Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

    2. Choose your tools

    Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

    a) Screencasts
    Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

    b) Whiteboard apps
    Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

    c) Paper slide shows
    I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

    3. Choose your platform

    Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

    4. Share your content

    Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

    Bonus Tips

    1. Make your videos in batches. 
    I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
    2. Start small.
    Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
    3. Divide and conquer.
    See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
    4. Get some cheap .mp3 players for student check-out.
    Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
    Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

    Choosing a Sensible Diet, Healthy Appetite

    So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

    Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

    So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

    Every time we open our mouths to eat we make an important decision concerning our future.

    Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

    Diet Start

    What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

    It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

    Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

    Don’t Be a Faddist

    On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

    In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

    It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

    Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

    Rules for Choosing a Sensible Diet

    Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

    The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

    What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

    From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

    The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

    PIONEER STUDIOS OFFICE MICROSOFT BY SKB ARCHITECTS

    The New Pioneer Studios Office which was designed by SkB Architects starting from the idea that need a space to socialize at night as well as it functioned during the day.

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Pioneer Studios Office - MicrosoftPioneer Studios Office – Microsoft

    Fallout 4 – Things The Game Doesn’t Tell You Or Explain To New Players Very Well (in Point Form) [UNDER CONSTRUCTION]

    [Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it eventually… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there was a Steam Sale on (Welcome New Players, heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]

    I’m having a ton of fun playing Fallout 4 (as I always say, ‘spending too much time Working On Settlements and ignoring the Main Storyline’) – but I wanted to share a bunch of things that I had to ‘figure out on my own’ in the game, or that I saw others had to (in forums, etc)… There is a kind of Tutorial in the first town in the game, and when you first start out some things are explained, but not much after that (there are some Instruction Screens the first time you Lockpick or Hack A Terminal). Below then, are a handful of concepts, in point form, that I wanted to share; especially for New Players, that the game doesn’t quite cover (or ‘cover enough’):

    • If it says “You lack the requirements to create this item” … and you have the requirements and Perks listed… there can actually be more Component requirements (build materials needed), you have to SCROLL DOWN on the Requirements List (labelled “Requires”) to see them
    • How to Holster your Weapon: Hold R for a moment (on PC, by Default); the same key as you have set for Reload (The game walks you through Aiming and Reloading, but does not seem to cover Holstering)

    • Weapons do not need to be Repaired in Fallout 4, but Power Armor can be damaged and need Repairing at a Power Armor Station, which can be found in Towns and Settlements, and can be Crafted in Workshop Mode as well (they require two Perks/Skills; Armorer (Rank 1) and Local Leader (Rank 2))

    • How to use the VANS Perk so that it shows the ‘Trail to Follow’: (See my article on V.A.N.S. … hold Q for a bit, then put away Pip-Boy right away with TAB and the ‘smoke trail to follow’ should be left behind)
    • You can adjust the Difficulty at any time in the game, even if it is just temporarily (such as if you are ill and can’t fight as well for a while). To change your Difficulty, bring up the Menu while playing (Escape on the PC), then go into the Settings, then into the Gameplay category, changing the Difficulty in there, from Very Easy all the way to Survival Mode (where you have to Sleep, Eat and Drink to stay alive and everything is ultra-hard to kill!). The chance for Legendary Items (and the Legendary Enemies that carry them) increases with the Difficulty – but you can also increase the chance of Legendaries by simply going further South and East, increasing the Difficulty of the Area/Mobs/etc
    • If you TRADE with Dogmeat he can carry Items like all other Companions can (he can also wear Dog Apparel, such as Dog Armor or Dog Collars, if they are found in The Wasteland)
    • You can increase how much Robot Companions can Carry, depending on what parts you build them with (need Automatron DLC to build a Robot that can be your Companion [to ‘accompany you on your Travels’]), watch the “Carry Weight” Amount as you choose parts
    • It is “ok” to Drink ‘the regular Water that is everywhere’, it will still heal you a little; it is just Irradiated and causes some Radiation Exposure. If you have a container such as an Empty Bottle or Milk Bottle, you can also fill these containers at Streams or other bodies of water, to Cook with

    Don’t totally ignore Cooking (although you totally can, if you want to). Cooking various icky parts and gooey bits that you find in The Commonwealth not only heals you, most of the Recipes also give you ‘Buffs’ – temporary increases in various Stats – and things like Breathing Underwater or the ability to Carry More… Cook All The Things!

    • The RED Bar in your Health Bar (that is normally GREEN) is the level of Radiation you have acquired. It ‘takes up space’ in your Health Bar, because you cannot be “100% healthy” with Radiation Exposure (it must be removed with RadAway or by a Doctor at a Clinic (for a small fee))
    • The Water Pumps that are built at Settlements give ‘Pure Water’ from underground (it counts as “Purified Water” as it comes from underground where it has been protected/filtered from radiation by the land/ground, similar to how it would be IRL). The Water Pumps can be drunk from directly (like a Water Fountain) or the water can be bottled to drink later (if carrying empty bottles/etc); you don’t have to go all the way back to The Vault to get “Pure Water” [something I was doing in Survival Mode all the time]
    • To Build in a Settlement, go up to the Workshop Bench (always ‘mostly red’ colour, with ‘tools’ on it and usually located Centrally in the Settlement) and Activate it. If you are “Allied with the Settlement” (helping them out or have already helped them out by Completing a Mission for them) it will open Workshop Mode
    • To Scrap in Workshop Mode (to ‘break down an item/weapons/armor into Components you can use for Building Materials), look at it (drop it on the ground if you are carrying it) and hit SCRAP. Walk around a Settlement as soon as you can utilize Workshop Mode, looking for anything that you can Scrap in the area, for use as building materials. The items you Scrap all get ‘broken down’ into Components, which are the building materials themselves, the ‘things you construct other things with’ – everything being stored in the Workshop Bench itself as Inventory

    You do not have to Scrap everything ‘manually’/’one at a time’. Just STORE or put Junk Items in the Workshop Inventory (‘trading with the Workshop Bench’, called “Transfer”) and when you want to Build something, the Workbench calculates if you have enough Junk Items to break down into enough Components to build with. It will show what you want to build as GREEN if you have enough estimated building materials to construct the thing you are trying to build. (You may also need certain Perks to build some things, watch the Requirements list)

    • People can ‘steal’ your Power Armor… Raiders can Steal your Power Armor if they come across it in The Wasteland, for example. Settlers can even take Weapons out of nearby Crates/Containers to use, when attacked. To avoid losing your Power Armor, take out the Fusion Core from the Power Armor (“Transfer”) when leaving it, so that it cannot be used by anyone else (it is like ‘taking the keys out of your vehicle’) [NPCs don’t seem to carry/use Fusion Cores on the Armor]. However there have been stories of cases where Settlers will take a Fusion Core out of a container in a Settlement and throw it in a nearby Power Armor Suit and run off with it to Defend the Settlement! Crazy. Although most of the time, the Settler will simply ‘get out’ of your Power Armor after the Settlement is Defended – still, take out Fusion Cores from your Power Armor when you leave it, so that noone (for the most part) can take your Power Armor and you can always find it where you left it.
    • If Items and Containers around you are ‘glowing green’ or looking like they have ‘pip-boy radar on them’, this is a result of the Highlighting from the Scrapper Perk. Any items that you ‘Tag for Searching’ for (eg. when trying to Build something and you didn’t have enough materials, you can “Tag the Components for Search”) will have this GREEN highlighting when the Pip-Boy detects you are close to an Item in the world that is made up of that type of Component (eg. Steel or Plastic).
      To turn this OFF, open the Pip-Boy and go to the Junk page in the Inventory tab, and change to component view by clicking on the Component View button at the bottom (‘C’ on PC).
      Then in this view, go through the Component types and clear the Tag For Search by doing it again on the Component type.
      Then, your ‘Highlighted view’ from the Scrapper Perk is turned off and Items and Containers will not ‘glow green’ around you anymore

    • Speaking of glowing green, unless you want your vision to be green-ish and REALLY BRIGHT every time you crouch (Sneak), don’t get Night Person Rank 2 (Perk). Although the Perk does state that you’ll get “Night Vision when you Sneak”, unless you really want to be able to see really well (and slightly green-ish) in the dark or when you Sneak, hold off on Rank 2, or watch some videos on it first, to see what it looks like. [To some, the Bonuses are worth it – and they don’t mind the way it looks – but personally, I did not like how the Night Vision worked/looked; and since Rank 2 of the Perk and the Vision are tied together (you cannot have one without the other), I personally avoid Rank 2 of the Perk, for now]
    • If you Exit the game (in any way except using ALT+F4), the game will Save your progress as an “Exit Save”. Then, when you start up the game again and Load the Exit Save, it will [should] Delete that Savegame. Note that if you try to Exit the game with the Pip-Boy up, the game cannot Save your progress when you Exit to the Main Menu or the Desktop (be careful in Survival Mode!)

    • Don’t forget to periodically see what Upgrades you can perform on your Weapons (to do more Damage) and Armor (to withstand/absorb more Damage) at Weapons Workbenches and Armor Workbenches. Some Modifications require Perks to ‘know how to do them’; check the Requirements as you go through your Weapons and Armor, to see what you need to make them better
    Tip: If you are having trouble killing things, look for ways to improve your Weapons to do more Damage and your Armor to protect you from it – with Modifications at Armor and Weapon Workbenches! Also, the further South/East you go, the harder (higher level) enemies you will face. Tread slowly, go back over areas you have been, to see if anyone has ‘moved in’ and left items/money around. Stick to the ‘NW’ as long as you need to (especially in Survival Mode)…

    Speaking of Killing Things, here is how to utilize the Suppressor (the Weapon Modification attachment that actually works really well in the game; but it is more ‘realistic’ than ‘silent’…).

    Note: Knowing how to attach a Suppressor to your Gun requires the skill/knowledge, represented by needed the “Gun Nut” Perk of different Ranks (needing Rank 2 for attaching a Suppressor to Pistols and needing Rank 4 for attaching a Suppressor to Rifles)


    Here are some Tips for shooting enemies (even groups) with a Suppressor on your gun:

    – Shoot from a distance
    (the Suppressor reduces sound, but is not “Silent”, just like IRL)

    – Headshot for instant kills
    (most of the time, aim manually to help this, as the chance to miss is always present in V.A.T.S. With good aiming, that single shot can always be spot-on)

    – Stop attacking your enemies for a moment
    (they will look around at first of course, but if you don’t move and don’t shoot, they will not know what the hell is going on and if you wait longer, they will eventually even stop looking “thinking it was the wind/rats/etc”)

    – Repeat, killing the second enemy, and so on…

    Try to remember that if you shoot too frequently, they can hear the direction (suppressors aren’t silent, just like IRL) or can see the puff of smoke or something, because they eventually figure out where you are BUT ONLY if you keep shooting when they are Cautious and looking for you. If you stop shooting when they are looking for the source of the sound/attack, you will be ok. Remember, “low and slow…”.

    • Weapon And Armor Attachments (Modifications made to Weapons and Armor at Workstations for each) can be taken off of Weapons and Armor you find and put on your own favourite pieces/items… As an example, take a ‘Weapon you found on a Raider’ to a Weapons Workbench and choose a lesser attachment/modification than what is present on the item. In this example, if you want a “Hardened Receiver” that is on a Weapon you found, choose one further ‘up’ the List of Modifications, such as a “Standard Receiver” and ‘build’ it on the Weapon you found; then you will be changing the Attachment and receive the “Hardened Receiver” Modification in the form of a small box ‘kit’ in your Inventory that you can then use on your own Weapon! Simply go back to your favourite gun at the same Weapons Workbench and see if you can put the new Weapon Mod (“the Hardened Receiver” with higher damage output) on your favourite gun
    • If people around you are glowing (looking, for example, red or green) and look like they have ‘lines through them’ as well, you may have a helmet of Power Armor that has the “Targeting HUD (Heads-Up Display)” on it as an Attachment/Modification. This effect is visible even if it is only active on a Companion’s Power Armor Helmet. Simply remove or change the Targeting HUD Modification of the Helmet at any Power Armor Station, to disable the effect.

    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful – especially new players to the game….. Have fun with Fallout 4!]

    The “Basic Seven” Foods

    1. Green and yellow leafy vegetables. These may be used either cooked or raw, fresh or frozen. They include cabbage, lettuce, broccoli, sprouts, asparagus, spinach, celery, and similar greens. These provide vitamin A to protect eyes and skin and to guard against infection. They also provide iron for the blood and roughage for elimination.

    2. Fruits—at least two each day. One may be an orange or some other citrus fruit. Another may be a banana, tomato, apple, pear, peach, a bunch of grapes, or some tropical fruit. For variety use strawberries, canteloupe, or some type of melon. These fruits provide vitamin C, which is essential for strong blood vessels and healthy gums and teeth. They also provide roughage for better elimination. Fresh fruits are best for these purposes. Heat destroys vitamin C.

    3. Potatoes and other vegetables. Two or more servings should be eaten each day. These include Irish potatoes, sweet potatoes, yams, beets, carrots, parsnips, lentils, onions, peas, beans, soybeans, and many more. Vitamins and minerals are present in all vegetables. Potatoes are a good source, especially when cooked in their skins. Vegetables may be used in various ways. Raw carrots are an excellent source of vitamin A. Vegetables provide bulk, which aids digestion.

    Diet Start

    4. Milk and dairy products. The very minimum for an adult should be a pint a day, or more, and a quart a day for each growing child or pregnant mother. Nursing mothers need even more. The milk may be in fluid form, as whole milk, buttermilk, skim milk, canned or evaporated milk, condensed milk, dried milk, or some form of cheese. One ounce of cheddar cheese is equal to a cup of milk. The milk can be used as a beverage or in cooking, such as soups, puddings, and desserts. Milk is a fine source of protein. It also provides minerals, vitamins, and especially calcium, which is needed for bones, teeth, nerves, and muscles.

    5. Protein foods. Foods that are rich in proteins include beans, peas, soybeans, nuts, peanuts, eggs, meat, or fish. Soybeans are the richest source of proteins known. They are far richer than eggs, liver, kidney, or any other meat products and far less expensive. They have been used in the Orient for many generations. Dried peas, beans, lentils, and peanuts are all similar to meat in food value.

    6. Whole-grain breads and cereals, at least two or three slices of bread and one dish of cooked cereal each day. These are particularly valuable for growing children and adults who work hard. Whole grains include wheat, rice, barley, corn, and other grains. “Enriched white flour” is better than ordinary white flour, but it is still lacking in certain essential elements. Grains and cereals provide calories for energy, as well as vitamins, minerals, and roughage. Whole grains, freshly ground, are best.

    7. Butter, cream, fortified margarine, or other vegetable fats. A certain amount of fat is essential in every diet. Salad oils, olive oil, corn oil, and similar products